Product
Product Facts
- Product Name
- TECO Single Phase Cast Iron Frame - BECY - TECO Electric Motors Australia and New Zealand
- Category
- Industrial & Commercial Equipment > Electric Motors
TECO · SINGLE-PHASE MOTORS
BECY Single Phase Cast Iron Motors
Dependable single-phase power, with the strength of a cast-iron frame. Our BECY range covers 1.1–7.5 kW, with metric frames 90S–132M, good starting torque and a choice of foot, flange, or foot-and-flange mounting. We can help you match the motor and its options to your application.
Our motors combine capacitor start–capacitor run (CSR) operation, continuous S1 duty, IP44 protection and totally enclosed fan cooling (IC411). Cast-iron construction, a steel terminal/capacitor box and steel fan cover provide a robust package. We use Class H and F insulation materials with low temperature rise for thermal reserve; the catalogue's insulation-class specification is Class F. Our published product offer includes a two-year warranty—please confirm the terms for your purchase with our team.
Supply and protection: motors below 1.5 kW are described as 240 V, single-phase, 50 Hz with manual overload protection. Motors from 1.5 kW are described as 240/480 V, single-phase, 50 Hz. The selection table lists 240 V throughout; the individual datasheets retain their own voltage and paired-current ratings below.
Choose your BECY configuration
Our 13 listed selections are linked below to their individual datasheets and every collected PDF drawing member. We show each distinct source once, even when several selections share it. Match the power, pole count, frame and mounting printed on the source; a shared archive does not make every member interchangeable.
The drawing references include IM1001 foot, IM2001 foot and flange, and IM3001 flange arrangements. In our catalogue, the flange-only range uses the BEDY designation; that name is retained in its tables. The 7.5 kW two-pole selection links to a standalone foot drawing, while other selections link to archives with several mountings. Related archive drawings remain associated with their original rows.
| Row | Website specification | Datasheet | Drawings / archive members |
|---|---|---|---|
| 413 | kW Rating: 1.50; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D90L | Datasheet-495.pdf | 2.2BE2 , 1.5BE4.pdf 2.2BF2 , 1.5BF4.pdf 2.2BV2 , 1.5VB4.pdf |
| 414 | kW Rating: 2.20; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D90L | Datasheet-489.pdf | 2.2BE2 , 1.5BE4.pdf 2.2BF2 , 1.5BF4.pdf 2.2BV2 , 1.5VB4.pdf |
| 415 | kW Rating: 1.10; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D90S | Datasheet-494.pdf | 1.5BE2 , 1.1BE4.pdf 1.5BF2 , 1.1BF4.pdf 1.5BV2 , 1.1BV4.pdf |
| 416 | kW Rating: 1.50; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D90S | Datasheet-488.pdf | 1.5BE2 , 1.1BE4.pdf 1.5BF2 , 1.1BF4.pdf 1.5BV2 , 1.1BV4.pdf |
| 417 | kW Rating: 2.20; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D100L | Datasheet-496.pdf | 3BE2 , 2.2BE4 , 3BE4.pdf 3BF2 , 2.2BF4 , 3BF4.pdf 3BV2 , 2.2BV4 , 3BV4.pdf |
| 418 | kW Rating: 3.00; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D100L | Datasheet-490.pdf | 3BE2 , 2.2BE4 , 3BE4.pdf 3BF2 , 2.2BF4 , 3BF4.pdf 3BV2 , 2.2BV4 , 3BV4.pdf |
| 419 | kW Rating: 3.00; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D100L | Datasheet-497.pdf | 3BE2 , 2.2BE4 , 3BE4.pdf 3BF2 , 2.2BF4 , 3BF4.pdf 3BV2 , 2.2BV4 , 3BV4.pdf |
| 420 | kW Rating: 4.00; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D112M | Datasheet-491.pdf | 4BE2 , 4BE4.pdf 4BF2 , 4BF4.pdf 4BV2 , 4BV4.pdf |
| 421 | kW Rating: 4.00; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D112M | Datasheet-498.pdf | 4BE2 , 4BE4.pdf 4BF2 , 4BF4.pdf 4BV2 , 4BV4.pdf |
| 422 | kW Rating: 7.50; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D132M | Datasheet-493.pdf | 5.5BE2-7.5BE2-5.5BE4.pdf |
| 423 | kW Rating: 7.50; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D132M | Datasheet-500.pdf | 7.5BE4.pdf 7.5BF4.pdf 7.5BV4.pdf |
| 424 | kW Rating: 5.50; Voltage: 240; Phases: 1; No. of Poles: 2; Frame Size: D132S | Datasheet-492.pdf | 5.5BE2 , 7.5BE2 , 5.5BE4.pdf 5.5BF2 , 7.5BF2 , 5.5BF4.pdf 5.5BV2 , 7.5BV2 , 5.5BV4.pdf |
| 425 | kW Rating: 5.50; Voltage: 240; Phases: 1; No. of Poles: 4; Frame Size: D132S | Datasheet-499.pdf | 5.5BE2 , 7.5BE2 , 5.5BE4.pdf 5.5BF2 , 7.5BF2 , 5.5BF4.pdf 5.5BV2 , 7.5BV2 , 5.5BV4.pdf |
CAD downloads: CADdrawings-495.zip · CADdrawings-494.zip · CADdrawings-497.zip · CADdrawings-498.zip · CADdrawings-500.zip · CADdrawings-499.zip
All 13 3D-drawing fields are available upon request. These are availability notices, not downloaded models. No software download is listed on this product page.
Built around your application
Tell us about your load's starting and running torque, operating duty, available supply and mounting requirements. Our CSR motors use a start capacitor for starting torque and a run capacitor during operation. The catalogue describes high starting torque with good running performance; the exact current, torque, speed, efficiency and power factor remain specific to the selected motor.
Our catalogue describes continuous operation at nameplate current, an ambient range of −10 to 40°C, and operation below 1,000 m altitude, with derating required above those conditions. Its standard specification gives a non-hazardous environment, maximum 90% relative humidity, and belt or direct drive. It lists IEC 34 and AS1359/1360 references; our product page names IEC60034 and AS1359. These source statements are not a current certificate of approval.
The cast-iron frame and endshields, cooling fins, bidirectional polypropylene fan, double-shielded pre-packed bearings and dynamically balanced die-cast aluminium rotor support dependable operation. The catalogue describes a centrifugal switch, copper random-wound stator, phenolic-base primer and synthetic enamel finish. For frames 90–132, its standard specification lists a grey Munsell N5.0-SG finish and stainless-steel nameplate. The terminal box is shown on the right viewed from the drive shaft end, with a left-side option. Confirm any modification with us.
We offer foot, flange and combined mounting options. Use each mounting's own dimensions and tolerances; do not transfer a foot dimension to a flange version. The outlines are marked typical dimensions only—contact us for certified dimensions before final installation. The catalogue states millimetres, while the individual outline sheets do not explicitly state general dimensional units. Their values remain as printed. Synchronous speed and full-load speed are separately identified.
For rotation changes and terminal connections, use the original diagrams and the instructions for your motor. The catalogue separates motors up to 1.1 kW with thermal protection from 1.5 kW and above without thermal protection in its wiring diagrams. Its spare-parts schedule nevertheless lists thermal-overload part codes for the 1.5 kW rows. Ask us to confirm the fitted protection and wiring; do not infer it from a spare-parts entry alone.
Details to confirm with our team
We retain the source-specific information below wherever our published documents differ. Please confirm the applicable edition and configuration with us before selecting replacement components or fixing installation dimensions.
- 7.5 kW two-pole frame: the website and Datasheet-493 state D132M, while the catalogue and associated foot drawing state 132S/D132S. The drawing covers 5.5/7.5 kW two-pole and 5.5 kW four-pole ratings. Do not substitute the 7.5 kW four-pole D132M outline.
- Voltage listings: the website's selection rows all show 240 V; 12 datasheets show 240/480 V. Only the 1.1 kW four-pole datasheet is 240 V alone. Preserve each supply/current pair.
- Start capacitor: the 1.5 kW two-pole performance table gives 125 µF / 250 Vac; the spare-parts table gives 150uf 250V AC.
- Run capacitor voltage: for 7.5 kW two-pole, the performance table gives 100 µF / 440 Vac, while the spare-parts table prints 100uf 110V AC. Confirm the correct replacement; neither entry has been silently changed.
- Drive-end bearing: the 4 kW four-pole spare-parts row prints 6206 ZZ; its datasheet and 112M dimensional tables give 6306 ZZ.
- Capacitor assemblies: the 5.5/7.5 kW four-pole spare-parts rows specify 145–174uf / 189–226uf, 330V ACx4, while the performance table lists 560/720 µF. Ranges and x2/x4 quantities remain literal; they are not a recommendation to sum values or substitute a wiring arrangement.
- 7.5 kW four-pole foot drawing: 7.5BE4 prints 170 for axial mounting-hole centres and 546 for overall length. Its printed chain 80 + 89 + 170 + 199 totals 538. The separate foot-and-flange drawing prints 178 for the hole centres. We retain the mounting-specific values and flag the unresolved chain.
- Flange tolerances: the catalogue gives N = js6, while the individual flange pilot callouts use h7. Its shaft-fit statement is D <28-j6, 38k6, leaving exactly 28 outside that printed rule; the 100L and 112M individual drawings explicitly show Ø28 j6. Keep the selected source's fit.
- Insulation, cooling and limits: Class H/F materials are not a Class H motor rating; the catalogue specifies Class F and the datasheets leave the insulation field blank. The catalogue prints IC0141 versus IC411 on the product page. It also separates ±10% supply tolerance from ±5% for rated performance, and a 105°C Class F rise statement from a performance rise not exceeding 90°C by resistance method.
- Document labels: the 90L flange file is named “2.2BV2 , 1.5VB4.pdf”, but its title block says 1.5BV4. The catalogue's 90–132 parts legend labels both items 5 and 10 “Endshield N-End”; the wording is preserved.
| Selection / sheet | Field | Datasheet | Catalogue |
|---|---|---|---|
| 2.2 kW / 2P · Datasheet-489.pdf | Full-load current at 480 V | 6.55 A | 6.6 A |
| 7.5 kW / 2P · Datasheet-493.pdf | Frame designation | D132M | 132S |
Catalogue current/torque ratios and power factors were compared on the same percentage basis as the datasheets. Original ratios, supply pairs and frame labels remain unchanged below. The 6.55/6.6 A difference may reflect rounding; neither figure is substituted.
BECY catalogue specifications
Our single-phase catalogue covers several families. Below we retain shared operating and construction context, the BECY performance and spare-parts rows, and the cast-iron mounting schedules—including flange-only tables labelled BEDY. BEGY steel-frame and B56-only tables are excluded from this product guide. Every catalogue page remains linked to its original edition.
Catalogue page 1 — Cover and whole-catalogue range; BECY range stated in guide.
Catalogue range and navigation
Catalogue context / Range
| Property | Value | Unit |
|---|---|---|
| BECY | Single Phase Motor, Type CSR; Series BECY; Frame size 90–132; Output 1.1–7.5kW. |
Catalogue context
| Property | Value | Unit |
|---|---|---|
| Contents | Motor range p2; standard specification p3; general description p4; motor classification and selection p5; connection diagram p5; schematic drawings p6; terminal connection p6; performance data p7; dimension drawings IM1001 p8, IM3001 p9, IM2001 p10, B56 p11; spare parts p11; company addresses p12. |
Shared standard specification
Shared catalogue reference: this page also names other frame sizes, outputs, supplies and mountings. Those entries are not blanket BECY specifications. Use the selected BECY source and confirm any conflicting limits.
Ratings and specifications / Rating
| Property | Value | Unit |
|---|---|---|
| Voltage | Rated Voltage 240V/480V | |
| Frequency | Rated Frequency 50Hz | |
| Output range | 0.18kW – 7.5kW | |
| R.P.M. (Syn.) | 3000R.P.M. (2 Pole); 1500R.P.M. (4 Pole) | |
| Duty | S1 (Continuous) | |
| Frame size | 71 – 132M | |
| Enclosure | TEFC Totally Enclosed Fan Cooled | |
| Degree of protection | IP 44 (Totally Enclosed, Splash Proof) | |
| Method of cooling | IC 0141 External Fan. Surface Cooling | |
| Mounting | IM 1001 Foot Mounting; IM 3001 Flange Mounting; IM 2001 Foot & Flange Mounting |
Ratings and specifications / Application
| Property | Value | Unit |
|---|---|---|
| Power condition | Voltage ±10%, Frequency ±5%. | |
| Environment conditions | Area = Non Hazardous. Ambient Temperature −10°C to 40°C. Relative Humidity = Max. 90%. Altitude = Max. 1000m (3300ft). | |
| Drive method | Belt Drive or Direct Coupling | |
| Direction of rotation | Bi-Directional | |
| Method of starting | D.O.L. (Direct-On-Line) Full Voltage |
Ratings and specifications / Construction
| Property | Value | Unit |
|---|---|---|
| Frame | 71 – 80 Rolled Steel; 90 – 132 Cast Iron | |
| Endshield | 71 – 80 Alum. Alloy with Steel Insert, except Frame 80 DE (Cast Iron); 90 – 132 Cast Iron | |
| External fan | Polypropylene | |
| Fan cover | Pressed Steel | |
| Bearing | Single Row Deep Groove Ball Bearing – Double Shields, Pre-Greased | |
| Terminal box | Pressed Steel, with Clearance Hole Cable Entry | |
| Stator winding | Polyester Enamelled Copper Wires, Random Wound | |
| Insulation system | Class F (Operating Temp. 155°C – Temp. Rise 105°C) | |
| Rotor | Squirrel Cage. Alum. Conductor with End-Ring | |
| Painting | Phenolic Base Paint, Laquer Surface Finish; 71 – 80 Munsell 2.5G 6/3 (Deep Green); 90 – 132 Munsell N5.0 – SG (Grey) | |
| Name plate | 71 – 80 Aluminium; 90 – 132 Stainless Steel | |
| Bolts | ISO Metric System (Except B56) |
Ratings and specifications / Performance
| Property | Value | Unit |
|---|---|---|
| Temperature rise | Not Exceeding 90°C by Resistance Method | |
| Over speed | 125% Syn. R.P.M. for one min. | |
| Over torque | 160% Rated Torque for 15 sec. | |
| Capacitor start | Series BEGY/BETY and BECY/BEDY: Capacitor Start – Capacitor Run. Series B56: Cap. Start – Cap. Run and Cap. Start – Induction Run. | |
| Standards | Comply with relevant IEC & AS Standards |
Ratings, construction and options
Shared catalogue reference: this page also names other frame sizes, outputs, supplies and mountings. Those entries are not blanket BECY specifications. Use the selected BECY source and confirm any conflicting limits.
Catalogue context
| Property | Value | Unit |
|---|---|---|
| Connection | 240 Volts Single Phase 50Hz for motors of 0.18kW to 7.5kW. 240/480 Volts Single Phase 50Hz from 1.5 to 7.5kW. The motors will produce their rated performance with voltage +/−5 per cent. | |
| Rating | Continuously rated at name plate current defined as S1 to AS 1359 within an ambient temperature −10 to 40°C, and altitude below 1000 metres. For higher ambients and/or altitudes the output rating must be adjusted accordingly; contact TECO. | |
| Performance | Standard motors are designed with performance in accordance with relevant standards within IEC34 and AS 1359 & 1360. | |
| Direction of rotation | Suitable for operation in either direction. Reversing direction uses the connection link within the terminal box; source refers to page 6. Original diagrams remain the authority. | |
| Mounting | Foot: IM1001, 1011, 1031, 1051, 1061, 1071. Flange: IM3001, 3011, 3031. Foot and Flange: IM2001. According to AS 1359 and IEC72. | |
| Frame | Two pole motors up to 1.1kW, four pole motors up to 0.75kW and Series B56 motors are rolled steel. Larger motors are high-grade cast iron with longitudinal cooling fins and integrally cast feet. | |
| Fan and fan cowl | Bi-directional cooling fans of polypropylene; pressed-steel fan cowl painted internally and externally to resist corrosion. | |
| Bearings and lubrication | Double shielded, pre-packed ball bearings sealed against dust and moisture; source states no further attention for the life of the bearing. | |
| Stator winding and insulation | High-grade insulated cold-rolled electromagnetic steel laminations; Class F insulation system. Source states resistance to tropical and high-humidity conditions. All motors incorporate a centrifugal switch between the starting and running windings. | |
| Rotor assembly | One-piece pressure die-cast aluminium rotor conductors and end rings; rotating parts dynamically balanced to minimise vibration. | |
| Terminal box | Pressed steel terminal box at the right-hand side when looking at the drive shaft end; left-hand side optional. Connections shown on source page 6. | |
| Capacitors | BEGY 0.25–1.1kW (2P) and BECY 1.1kW (4P) to 7.5kW are capacitor start capacitor run. B56 0.75kW 2-pole and 0.25–0.55kW 4-pole are capacitor start induction run; B56 0.75kW 4-pole is capacitor start capacitor run. | |
| Paint finish | Castings and steel parts have a phenolic-base prime coat and synthetic enamel paint finish. |
Starting arrangements and selection
Shared catalogue reference: this page also names other frame sizes, outputs, supplies and mountings. Those entries are not blanket BECY specifications. Use the selected BECY source and confirm any conflicting limits.
Catalogue context
| Property | Value | Unit |
|---|---|---|
| Classification | CSIR = Capacitor Start – Induction Run. CSR = Capacitor Start – Capacitor Run. | |
| Selection | Selection depends on starting and running torque requirements, duty cycle and power-supply starting/running current limits. Source says TECO can manufacture single-phase motors for various applications. | |
| CSIR characteristics | High starting torque and medium starting current; source describes suitability for heavier duty applications and power supplies with higher voltage variation. | |
| CSR characteristics | Combines high starting torque and good running performance. Source describes use for integral-rating applications with heavier starting torque requirements. | |
| Source stock and protector note | Source states CSIR and CSR motors are stocked by TECO Australia, and single-voltage motors are normally fitted with thermal protectors. Historical catalogue statement; not current inventory proof. | |
| Connection diagram context | Separate C.C.W. and C.W. rotation diagrams for CSIR at 240V and CSR at 240V/480V. No wiring connections reconstructed; consult original page. |
Terminal connection reference
Shared catalogue reference: this page also names other frame sizes, outputs, supplies and mountings. Those entries are not blanket BECY specifications. Use the selected BECY source and confirm any conflicting limits.
Catalogue context
| Property | Value | Unit |
|---|---|---|
| Terminal connection context | Printed groups: 1.1kW and below with Thermal Protector (240V), and 1.5kW and above without Thermal Protector (240V/480V); C.C.W. and C.W. diagrams. Original diagrams govern connections; geometry is not encoded here. |
Schematic legend / Frame 90–132
| Property | Value | Unit |
|---|---|---|
| 1 | Fan Cover | part label |
| 2 | Fan | part label |
| 3 | Centrifugal Switch | part label |
| 4 | Centr. Switch Cover | part label |
| 5 | Endshield N-End | part label |
| 6 | Stator Frame | part label |
| 7 | Eye Bolt (100-132) | part label |
| 8 | Stator | part label |
| 9 | Rotor | part label |
| 10 | Endshield N-End | part label |
| 11 | Bearing | part label |
| 12 | Shaft | part label |
| 13 | Terminal Box | part label |
BECY performance data
Performance data
Conditions: Four printed row groups: main-range 2-pole, main-range 4-pole, B56 2-pole, B56 4-pole. A dash is preserved as a source dash, not zero. Only the listed frame/output/pole combination is covered; source association with a product does not make all rows applicable to that product. 240/480V supply distinctions and start/run capacitors remain separate. Notes/formulas are retained in the page commentary.
| Poles (poles) | Rated output (kW) | Frame size | Speed (RPM) | Efficiency (%) | Power factor cosφ (dimensionless) | Full-load current 240V (A) | Full-load current 480V (A) | Starting current ratio 240V (Ist/IN) | Starting current ratio 480V (Ist/IN) | Full-load torque (Nm) | Starting torque ratio (Tst/TN) | Breakdown torque ratio (Tb/TN) | Start capacitor (µF) | Start capacitor rated voltage (Vac) | Run capacitor (µF) | Run capacitor rated voltage (Vac) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1.5 | 90S | 2910 | 77.5 | 0.89 | 9 | 4.5 | 7 | 7 | 4.9 | 2.3 | 2.6 | 125 | 250 | 15 | 440 |
| 2 | 2.2 | 90L | 2895 | 77.9 | 0.92 | 13.1 | 6.6 | 6.7 | 6.7 | 7.3 | 2.1 | 2.5 | 150 | 250 | 20 | 440 |
| 2 | 3 | 100L | 2875 | 75.6 | 0.92 | 18 | 9 | 5.9 | 5.9 | 10 | 2.5 | 2.3 | 250 | 250 | 30 | 440 |
| 2 | 4 | 112M | 2900 | 74.6 | 0.93 | 25 | 12.5 | 5.5 | 5.5 | 13.1 | 1.6 | 2.2 | 300 | 250 | 30 | 440 |
| 2 | 5.5 | 132S | 2930 | 79.2 | 0.96 | 30 | 15 | 8 | 8 | 18 | 2.8 | 2.6 | 560 | 330 | 60 | 440 |
| 2 | 7.5 | 132S | 2930 | 81.2 | 0.99 | 40 | 20 | 6.8 | 6.8 | 24.5 | 2.4 | 2.3 | 720 | 330 | 100 | 440 |
| 4 | 1.1 | 90S | 1445 | 69.6 | 0.76 | 8.8 | — | 5.1 | — | 7.3 | 2.2 | 2.2 | 125 | 250 | 15 | 440 |
| 4 | 1.5 | 90L | 1450 | 72.8 | 0.82 | 10.4 | 5.2 | 5.8 | 5.8 | 9.9 | 2.4 | 2.2 | 150 | 250 | 15 | 440 |
| 4 | 2.2 | 100L | 1455 | 76.4 | 0.92 | 13.3 | 6.7 | 5.7 | 5.7 | 14.4 | 1.8 | 2.2 | 200 | 250 | 25 | 440 |
| 4 | 3 | 100L | 1445 | 76.7 | 0.93 | 17.5 | 8.8 | 6 | 6 | 19.8 | 2.1 | 2.2 | 250 | 250 | 30 | 440 |
| 4 | 4 | 112M | 1440 | 79 | 0.87 | 25 | 12.5 | 5.4 | 5.4 | 26.5 | 1.9 | 2.1 | 300 | 250 | 30 | 440 |
| 4 | 5.5 | 132S | 1465 | 80.5 | 0.88 | 33 | 16.5 | 5.9 | 5.9 | 36 | 2.5 | 2.2 | 560 | 330 | 60 | 440 |
| 4 | 7.5 | 132M | 1455 | 80.5 | 0.92 | 42 | 21 | 5.3 | 5.3 | 49 | 2.1 | 1.8 | 720 | 330 | 100 | 440 |
Source conditions: Tolerances according to IEC 34-1 and AS 1359.60. Efficiency — 15(1−η)% when P2 ≤50kW. Power factor cosφ — (1−cosφ)/6, minimum 0.02, maximum 0.07. Torque TN = (9550 × kW)/RPM Nm. Data subject to change without notice.
Catalogue context
| Property | Value | Unit |
|---|---|---|
| Definitions and conversions | 1kW = 1.34HP; 1HP = 0.746kW; 1Nm = 0.102kgmf. Ist/IN = Starting Current/Nominal F.L. Current; Tst/TN = Starting Torque/Nominal F.L. Torque; Tb/TN = Break down Torque/Nominal F.L. Torque. |
Foot mounting IM1001
IM1001 overall and mounting dimensions
Conditions: Dimensions in mm unless an explicit inch, rating, part or mass unit is printed. Values in explicitly merged cells are repeated only within their source row span. Empty output cells remain blank, not an inferred additional variant. Geometry remains in the original. Design, data and dimensions subject to modification without notice.
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | A (mm) | AA (mm) | AB (mm) | AC (mm) | AD (mm) | AE (mm) | B (mm) | BA (mm) | BB (mm) | C (mm) | H (mm) | HA (mm) | HC (mm) | HD (mm) | HE (mm) | K (mm) | KK (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BECY | 90S | 1.5 | 1.1 | 2 | 140 | 35.5 | 170 | 200 | 170 | 128 | 100 | 130 | 56 | 90 | 10 | 190 | 17 | 10 | 22 | ||
| BECY | 90L | 2.2 | 1.5 | 2 | 140 | 35.5 | 170 | 200 | 170 | 128 | 125 | 150 | 56 | 90 | 10 | 190 | 17 | 10 | 22 | ||
| BECY | 100L | 3.0 | 2.2 | 3 | 160 | 45 | 195 | 219 | 180 | 138 | 140 | 175 | 63 | 100 | 12.5 | 243 | 27 | 12 | 22 | ||
| BECY | 100L | 3.0 | 3 | 160 | 45 | 195 | 219 | 180 | 138 | 140 | 175 | 63 | 100 | 12.5 | 243 | 27 | 12 | 22 | |||
| BECY | 112M | 4.0 | 4.0 | 3 | 190 | 45 | 224 | 238 | 236 | 147 | 140 | 175 | 70 | 112 | 14 | 265 | 39 | 12 | 22 | ||
| BECY | 132S | 5.5 | 5.5 | 4 | 216 | 45 | 250 | 273 | 294 | 192 | 140 | 175 | 89 | 132 | 16 | 310 | 54 | 12 | 22 | ||
| BECY | 132S | 7.5 | 4 | 216 | 45 | 250 | 273 | 294 | 192 | 140 | 175 | 89 | 132 | 16 | 310 | 54 | 12 | 22 | |||
| BECY | 132M | 7.5 | 4 | 216 | 45 | 250 | 273 | 294 | 192 | 170 | 212 | 89 | 132 | 16 | 310 | 54 | 12 | 22 |
IM1001 shaft bearing and approximate mass
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | L (mm) | LE (mm) | LL (mm) | Z (mm) | D (mm) | E (mm) | ED (mm) | F (mm) | G (mm) | GA (mm) | Bearing D-END | Bearing ND-END | Approx. mass 2P (kg) | Approx. mass 4P (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BECY | 90S | 1.5 | 1.1 | 2 | 367 | 161 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ | 24.5 | 23 | ||
| BECY | 90L | 2.2 | 1.5 | 2 | 392 | 161 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ | 31 | 26.8 | ||
| BECY | 100L | 3.0 | 2.2 | 3 | 431 | 168 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ | 35 | 36 | ||
| BECY | 100L | 3.0 | 3 | 431 | 168 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ | 39 | ||||
| BECY | 112M | 4.0 | 4.0 | 3 | 449 | 179 | 28 | 60 | 40 | 8 | 24 | 31 | 6306 ZZ | 6306 ZZ | 43.2 | 47.4 | ||
| BECY | 132S | 5.5 | 5.5 | 4 | 508 | 199 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | 77 | 75 | ||
| BECY | 132S | 7.5 | 4 | 508 | 199 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | 80 | ||||
| BECY | 132M | 7.5 | 4 | 546 | 199 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | 81 |
Flange mounting IM3001 — BEDY catalogue designation
IM3001 flange dimensions
Conditions: Dimensions in mm unless an explicit inch, rating, part or mass unit is printed. Values in explicitly merged cells are repeated only within their source row span. Empty output cells remain blank, not an inferred additional variant. Geometry remains in the original. Design, data and dimensions subject to modification without notice. Series are BETY/BEDY on this page; not silently relabelled BEGY/BECY.
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | AD (mm) | AE (mm) | HB (mm) | HC (mm) | KK (mm) | L (mm) | LA (mm) | LB (mm) | M (mm) | N (mm) | P (mm) | S (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BEDY | 90S | 1.5 | 1.1 | 2 | 170 | 128 | 22 | 406 | 12 | 356 | 165 | 130 | 200 | 12 | 3.5 | ||
| BEDY | 90L | 2.2 | 1.5 | 2 | 170 | 128 | 22 | 431 | 12 | 381 | 165 | 130 | 200 | 12 | 3.5 | ||
| BEDY | 100L | 3.0 | 2.2 | 3 | 180 | 138 | 280 | 22 | 431 | 16 | 371 | 215 | 180 | 250 | 15 | 4 | |
| BEDY | 100L | 3.0 | 3 | 180 | 138 | 280 | 22 | 431 | 16 | 371 | 215 | 180 | 250 | 15 | 4 | ||
| BEDY | 112M | 4.0 | 4.0 | 3 | 236 | 147 | 300 | 22 | 489 | 16 | 429 | 215 | 180 | 250 | 15 | 4 | |
| BEDY | 132S | 5.5 | 5.5 | 3 | 294 | 192 | 336 | 22 | 508 | 20 | 428 | 265 | 230 | 300 | 15 | 4 | |
| BEDY | 132S | 7.5 | 3 | 294 | 192 | 336 | 22 | 508 | 20 | 428 | 265 | 230 | 300 | 15 | 4 | ||
| BEDY | 132M | 7.5 | 3 | 294 | 192 | 336 | 22 | 546 | 20 | 466 | 265 | 230 | 300 | 15 | 4 |
IM3001 shaft and bearing dimensions
Conditions: Dimensions in mm unless an explicit inch, rating, part or mass unit is printed. Values in explicitly merged cells are repeated only within their source row span. Empty output cells remain blank, not an inferred additional variant. Geometry remains in the original. Design, data and dimensions subject to modification without notice. Printed tolerance text: D = <28-j6, 38k6; F = h9; H = +0 −0.5; N = js6. Do not infer an unstated D=28 tolerance.
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | D (mm) | E (mm) | ED (mm) | F (mm) | G (mm) | GA (mm) | Bearing D-END | Bearing ND-END |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BEDY | 90S | 1.5 | 1.1 | 2 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ |
| BEDY | 90L | 2.2 | 1.5 | 2 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ |
| BEDY | 100L | 3.0 | 2.2 | 3 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ |
| BEDY | 100L | 3.0 | 3 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ | |
| BEDY | 112M | 4.0 | 4.0 | 3 | 28 | 60 | 40 | 8 | 24 | 31 | 6306 ZZ | 6306 ZZ |
| BEDY | 132S | 5.5 | 5.5 | 3 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ |
| BEDY | 132S | 7.5 | 3 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | |
| BEDY | 132M | 7.5 | 3 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ |
IM3001 tolerance
| Property | Value | Unit |
|---|---|---|
| D | <28-j6, 38k6 | |
| F | h9 | |
| H | +0 −0.5 | |
| N | js6 |
Drawing callout
| Property | Value | Unit |
|---|---|---|
| Flange figures 1–3 | 45° |
Foot and flange mounting IM2001
IM2001 foot and flange dimensions
Conditions: Dimensions in mm unless an explicit inch, rating, part or mass unit is printed. Values in explicitly merged cells are repeated only within their source row span. Empty output cells remain blank, not an inferred additional variant. Geometry remains in the original. Design, data and dimensions subject to modification without notice.
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | A (mm) | AA (mm) | AB (mm) | AD (mm) | AE (mm) | B (mm) | BA (mm) | BB (mm) | C (mm) | H (mm) | HA (mm) | HC (mm) | HD (mm) | HE (mm) | K (mm) | KK (mm) | L (mm) | LA (mm) | LB (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BECY | 90S | 1.5 | 1.1 | 2 | 140 | 35.5 | 170 | 170 | 128 | 100 | 130 | 95 | 90 | 10 | 17 | 10 | 22 | 406 | 12 | 356 | |||
| BECY | 90L | 2.2 | 1.5 | 2 | 140 | 35.5 | 170 | 170 | 128 | 125 | 150 | 95 | 90 | 10 | 17 | 10 | 22 | 431 | 12 | 381 | |||
| BECY | 100L | 3.0 | 2.2 | 3 | 160 | 45 | 195 | 180 | 138 | 140 | 175 | 103 | 100 | 12.5 | 243 | 27 | 12 | 22 | 471 | 16 | 411 | ||
| BECY | 100L | 3.0 | 3 | 160 | 45 | 195 | 180 | 138 | 140 | 175 | 103 | 100 | 12.5 | 243 | 27 | 12 | 22 | 471 | 16 | 411 | |||
| BECY | 112M | 4.0 | 4.0 | 3 | 190 | 45 | 224 | 236 | 147 | 140 | 175 | 110 | 112 | 14 | 265 | 39 | 12 | 22 | 489 | 16 | 429 | ||
| BECY | 132S | 5.5 | 5.5 | 4 | 216 | 45 | 250 | 294 | 192 | 140 | 175 | 139 | 132 | 16 | 310 | 54 | 12 | 22 | 558 | 20 | 478 | ||
| BECY | 132S | 7.5 | 4 | 216 | 45 | 250 | 294 | 192 | 140 | 175 | 139 | 132 | 16 | 310 | 54 | 12 | 22 | 558 | 20 | 478 | |||
| BECY | 132M | 7.5 | 4 | 216 | 45 | 250 | 294 | 192 | 178 | 212 | 139 | 132 | 16 | 310 | 54 | 12 | 22 | 596 | 20 | 516 |
IM2001 flange shaft and bearing dimensions
| Series | Frame | Output 2P (kW) | Output 4P (kW) | Figure (figure reference) | LL (mm) | M (mm) | N (mm) | P (mm) | S (mm) | T (mm) | Z (mm) | D (mm) | E (mm) | ED (mm) | F (mm) | G (mm) | GA (mm) | Bearing D-END | Bearing ND-END |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BECY | 90S | 1.5 | 1.1 | 2 | 165 | 130 | 200 | 12 | 3.5 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ | ||
| BECY | 90L | 2.2 | 1.5 | 2 | 165 | 130 | 200 | 12 | 3.5 | 24 | 50 | 32 | 8 | 20 | 27 | 6205 ZZ | 6205 ZZ | ||
| BECY | 100L | 3.0 | 2.2 | 3 | 215 | 180 | 250 | 15 | 4 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ | ||
| BECY | 100L | 3.0 | 3 | 215 | 180 | 250 | 15 | 4 | 28 | 60 | 40 | 8 | 24 | 31 | 6206 ZZ | 6305 ZZ | |||
| BECY | 112M | 4.0 | 4.0 | 3 | 215 | 180 | 250 | 15 | 4 | 28 | 60 | 40 | 8 | 24 | 31 | 6306 ZZ | 6306 ZZ | ||
| BECY | 132S | 5.5 | 5.5 | 4 | 265 | 230 | 300 | 15 | 4 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | ||
| BECY | 132S | 7.5 | 4 | 265 | 230 | 300 | 15 | 4 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ | |||
| BECY | 132M | 7.5 | 4 | 265 | 230 | 300 | 15 | 4 | 38 | 80 | 56 | 10 | 33 | 41 | 6308 ZZ | 6306 ZZ |
Drawing callout
| Property | Value | Unit |
|---|---|---|
| Figure 4 | 2 × M12 | printed callout |
BECY spare parts
Spare parts list
Conditions: Dimensions in mm unless an explicit inch, rating, part or mass unit is printed. Values in explicitly merged cells are repeated only within their source row span. Empty output cells remain blank, not an inferred additional variant. Geometry remains in the original. Design, data and dimensions subject to modification without notice. Original kW–P column is split into output and pole count only. Capacitor ranges and x2/x4 multiplicity remain verbatim; no summed/replacement capacitor is inferred. Dashes are printed source dashes, not zeros.
| Type | Output (kW) | Poles (poles) | Centrifugal switch (part code) | Capacitor START | Capacitor RUN | Thermal overload (part code) | Bearing D-END | Bearing ND-END |
|---|---|---|---|---|---|---|---|---|
| BECYBS | 1.1 | 4 | TS2RB4524 | 125uf 250V AC | 15uf 440V AC | MEJ 20RB | 6205 ZZ | 6205 ZZ |
| BECYBS | 1.5 | 2 | TS2RB2524 | 150uf 250V AC | 15uf 440V AC | MEJ 22AB | 6205 ZZ | 6205 ZZ |
| BECYBS | 1.5 | 4 | TS2RB4524 | 150uf 250V AC | 15uf 440V AC | MEJ 22AB | 6205 ZZ | 6205 ZZ |
| BECYBS | 2.2 | 2 | TS2RB2524 | 150uf 250V AC | 20uf 440V AC | — | 6205 ZZ | 6205 ZZ |
| BECYBS | 2.2 | 4 | TS2RB4524 | 200uf 250V AC | 25uf 440V AC | — | 6206 ZZ | 6305 ZZ |
| BECYBS | 3 | 2 | TS2RB2524 | 250uf 250V AC | 15uf 440V ACx2 | — | 6206 ZZ | 6305 ZZ |
| BECYBS | 3 | 4 | TS2RB4524 | 250uf 250V AC | 15uf 440V ACx2 | — | 6206 ZZ | 6305 ZZ |
| BECYBS | 4 | 2 | TS2RB2524 | 150uf 250V ACx2 | 15uf 440V ACx2 | — | 6306 ZZ | 6306 ZZ |
| BECYBS | 4 | 4 | TS2RB4524 | 150uf 250V ACx2 | 15uf 440V ACx2 | — | 6206 ZZ | 6306 ZZ |
| BECYBS | 5.5 | 4 | TS3RB4524 | 145-174uf 330V ACx4 | 15uf 440V ACx4 | — | 6308 ZZ | 6306 ZZ |
| BECYBS | 7.5 | 4 | TS3RB4524 | 189-226uf 330V ACx4 | 25uf 440V ACx4 | — | 6308 ZZ | 6306 ZZ |
| BECYBS | 5.5 | 2 | TS3RB2524 | 560uf 330V AC | 60uf 440V AC | — | 6308 ZZ | 6306 ZZ |
| BECYBS | 7.5 | 2 | TS3RB2524 | 720uf 330V AC | 100uf 110V AC | — | 6308 ZZ | 6306 ZZ |
Catalogue page 12 — Historical contact back cover; current contact linked.
Individual datasheets and drawings
Each source retains its own ratings, dimensions, units, missing-value statements and qualifications. Blank or dash entries are not zero. Original drawings remain available for geometry, wiring and graphical information not captured in the tables. Dates and historical standards remain attached to the source edition.
2.2BE2 , 1.5BE4.pdf
Associated selection rows: 413, 414
PDFdrawings-495.zip > 90L FRAME/2.2BE2 , 1.5BE4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90L | as printed | — |
| Identity / drawing_number | 2.2BE2 / 1.5BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 392 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 190 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 90 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 125 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 150 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 161 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 35.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 17 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø10 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 2.2BE2 , 1.5BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 2.2 kW | 3 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.5 kW | 2 HP | 1500 rpm (synchronous) | C1 |
2.2BF2 , 1.5BF4.pdf
Associated selection rows: 413, 414
PDFdrawings-495.zip > 90L FRAME/2.2BF2 , 1.5BF4.pdf.
Source page 1
Conditions for this section:
- C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90L | as printed | — |
| Identity / drawing_number | 2.2BF2 / 1.5BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 431 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 381 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø130 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø165 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 3.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt holes | 4-Ø12 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Shaft height and tolerance | 90 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 125 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 150 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 95 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 35.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 17 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø10 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 2.2BF2 , 1.5BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 2.2 kW | 3 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.5 kW | 2 HP | 1500 rpm (synchronous) | C1 |
2.2BV2 , 1.5VB4.pdf
Associated selection rows: 413, 414
PDFdrawings-495.zip > 90L FRAME/2.2BV2 , 1.5VB4.pdf.
Source differences and limitations
- Filename lists 1.5VB4; title block lists 1.5BV4. Printed title identity retained; original filename unchanged.
Source page 1
Conditions for this section:
- C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90L | as printed | — |
| Identity / drawing_number | 2.2BV2 / 1.5BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 431 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 381 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø130 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø165 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 3.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt holes | 4-Ø12 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 2.2BV2 , 1.5VB4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 2.2 kW | 3 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.5 kW | 2 HP | 1500 rpm (synchronous) | C1 |
Datasheet-495.pdf
Associated selection rows: 413
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 413. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 1.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D90L | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1450 | (rpm) | — |
| CURRENT / FULL LOAD | 10.4 / 5.2 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 580 | % | — |
| TORQUE / FULL LOAD TORQUE | 9.9 | (Nm) | — |
| TORQUE / STARTING TORQUE | 240 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 72.8 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 82 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 26.8 | kgs | — |
| BEARINGS / DRIVE END | 6205 ZZ | — | |
| BEARINGS / NON DRIVE END | 6205 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Datasheet-489.pdf
Associated selection rows: 414
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 414. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 2.2 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D90L | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2895 | (rpm) | — |
| CURRENT / FULL LOAD | 13.1 / 6.55 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 670 | % | — |
| TORQUE / FULL LOAD TORQUE | 7.3 | (Nm) | — |
| TORQUE / STARTING TORQUE | 210 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 250 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 77.9 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 92 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 31 | kgs | — |
| BEARINGS / DRIVE END | 6205 ZZ | — | |
| BEARINGS / NON DRIVE END | 6205 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
1.5BE2 , 1.1BE4.pdf
Associated selection rows: 415, 416
PDFdrawings-494.zip > 90S FRAME/1.5BE2 , 1.1BE4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90S | as printed | — |
| Identity / drawing_number | 1.5BE2 / 1.1BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 367 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 190 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 90 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 100 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 130 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 161 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 35.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 17 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø10 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 1.5BE2 , 1.1BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 1.5 kW | 2 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.1 kW | 1.5 HP | 1500 rpm (synchronous) | C1 |
1.5BF2 , 1.1BF4.pdf
Associated selection rows: 415, 416
PDFdrawings-494.zip > 90S FRAME/1.5BF2 , 1.1BF4.pdf.
Source page 1
Conditions for this section:
- C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90S | as printed | — |
| Identity / drawing_number | 1.5BF2 / 1.1BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 406 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 356 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø130 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø165 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 3.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt holes | 4-Ø12 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Shaft height and tolerance | 90 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 100 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 130 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 95 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 35.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 17 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø10 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 1.5BF2 , 1.1BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 1.5 kW | 2 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.1 kW | 1.5 HP | 1500 rpm (synchronous) | C1 |
1.5BV2 , 1.1BV4.pdf
Associated selection rows: 415, 416
PDFdrawings-494.zip > 90S FRAME/1.5BV2 , 1.1BV4.pdf.
Source page 1
Conditions for this section:
- C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D90S | as printed | — |
| Identity / drawing_number | 1.5BV2 / 1.1BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 406 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 356 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 50 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 32 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 128 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø24 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M8 TAP DEEP 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø200 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø130 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø165 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 12 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 3.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt holes | 4-Ø12 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 1.5BV2 , 1.1BV4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 1.5 kW | 2 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 1.1 kW | 1.5 HP | 1500 rpm (synchronous) | C1 |
Datasheet-494.pdf
Associated selection rows: 415
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 1.1 | — | |
| VOLTAGE | 240 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D90S | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1445 | (rpm) | — |
| CURRENT / FULL LOAD | 8.8 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 510 | % | — |
| TORQUE / FULL LOAD TORQUE | 7.3 | (Nm) | — |
| TORQUE / STARTING TORQUE | 220 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 69.6 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 76 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 23 | kgs | — |
| BEARINGS / DRIVE END | 6205 ZZ | — | |
| BEARINGS / NON DRIVE END | 6205 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Datasheet-488.pdf
Associated selection rows: 416
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 416. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 1.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D90S | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2910 | (rpm) | — |
| CURRENT / FULL LOAD | 9 / 4.5 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 700 | % | — |
| TORQUE / FULL LOAD TORQUE | 4.9 | (Nm) | — |
| TORQUE / STARTING TORQUE | 230 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 260 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 77.5 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 89 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 24.5 | kgs | — |
| BEARINGS / DRIVE END | 6205 ZZ | — | |
| BEARINGS / NON DRIVE END | 6205 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
3BE2 , 2.2BE4 , 3BE4.pdf
Associated selection rows: 417, 418, 419
PDFdrawings-497.zip > 100L FRAME/3BE2 , 2.2BE4 , 3BE4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D100L | as printed | — |
| Identity / drawing_number | 2.2BE4 / 3BE2 / 3BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 431 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 180 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 138 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 243 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 100 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 160 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 195 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 63 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 168 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 12.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 219 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 3BE2 , 2.2BE4 , 3BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 3 kW | 4 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 2.2/3 kW | 3/4 HP | 1500 rpm (synchronous) | C1 |
3BF2 , 2.2BF4 , 3BF4.pdf
Associated selection rows: 417, 418, 419
PDFdrawings-497.zip > 100L FRAME/3BF2 , 2.2BF4 , 3BF4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D100L | as printed | — |
| Identity / drawing_number | 2.2BF4 / 3BF2 / 3BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 471 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 411 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 180 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 138 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø180 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø215 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 243 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Shaft height and tolerance | 100 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 160 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 195 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 103 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 12.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 27 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 3BF2 , 2.2BF4 , 3BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 3 kW | 4 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 2.2/3 kW | 3/4 HP | 1500 rpm (synchronous) | C1 |
3BV2 , 2.2BV4 , 3BV4.pdf
Associated selection rows: 417, 418, 419
PDFdrawings-497.zip > 100L FRAME/3BV2 , 2.2BV4 , 3BV4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D100L | as printed | — |
| Identity / drawing_number | 3BV2 / 2.2BV4 / 3BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 431 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 371 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 180 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 138 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø180 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø215 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Side-view vertical envelope including projections | 280 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 3BV2 , 2.2BV4 , 3BV4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 3 kW | 4 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 2.2/3 kW | 3/4 HP | 1500 rpm (synchronous) | C1 |
Datasheet-496.pdf
Associated selection rows: 417
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 417. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 2.2 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D100L | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1455 | (rpm) | — |
| CURRENT / FULL LOAD | 13.3 / 6.7 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 570 | % | — |
| TORQUE / FULL LOAD TORQUE | 14.4 | (Nm) | — |
| TORQUE / STARTING TORQUE | 180 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 76.4 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 92 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 36 | kgs | — |
| BEARINGS / DRIVE END | 6206 ZZ | — | |
| BEARINGS / NON DRIVE END | 6305 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Datasheet-490.pdf
Associated selection rows: 418
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 418. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 3 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D100L | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2875 | (rpm) | — |
| CURRENT / FULL LOAD | 18.0 / 9 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 590 | % | — |
| TORQUE / FULL LOAD TORQUE | 10 | (Nm) | — |
| TORQUE / STARTING TORQUE | 250 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 230 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 75.6 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 92 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 35 | kgs | — |
| BEARINGS / DRIVE END | 6206 ZZ | — | |
| BEARINGS / NON DRIVE END | 6305 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Datasheet-497.pdf
Associated selection rows: 419
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 419. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 3 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D100L | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1445 | (rpm) | — |
| CURRENT / FULL LOAD | 17.5 / 8.8 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 600 | % | — |
| TORQUE / FULL LOAD TORQUE | 19.8 | (Nm) | — |
| TORQUE / STARTING TORQUE | 210 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 76.7 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 93 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 39 | kgs | — |
| BEARINGS / DRIVE END | 6206 ZZ | — | |
| BEARINGS / NON DRIVE END | 6305 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
4BE2 , 4BE4.pdf
Associated selection rows: 420, 421
PDFdrawings-498.zip > 112M FRAME/4BE2 , 4BE4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D112M | as printed | — |
| Identity / drawing_number | 4BE2 / 4BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 449 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 236 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 147 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 265 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 112 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 190 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 224 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 70 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 179 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 14 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 39 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 238 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 4BE2 , 4BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 4 kW | 5.5 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 4 kW | 5.5 HP | 1500 rpm (synchronous) | C1 |
4BF2 , 4BF4.pdf
Associated selection rows: 420, 421
PDFdrawings-498.zip > 112M FRAME/4BF2 , 4BF4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D112M | as printed | — |
| Identity / drawing_number | 4BF2 / 4BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 489 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 429 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 236 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 147 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø180 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø215 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 265 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Shaft height and tolerance | 112 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 190 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 224 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 110 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 14 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 39 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 4BF2 , 4BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 4 kW | 5.5 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 4 kW | 5.5 HP | 1500 rpm (synchronous) | C1 |
4BV2 , 4BV4.pdf
Associated selection rows: 420, 421
PDFdrawings-498.zip > 112M FRAME/4BV2 , 4BV4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D112M | as printed | — |
| Identity / drawing_number | 4BV2 / 4BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 489 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 429 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 60 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 40 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 236 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 147 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø28 j6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 8 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 31 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 24 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M10 TAP DEEP 15 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø180 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø215 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Side-view vertical envelope including projections | 300 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 4BV2 , 4BV4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 4 kW | 5.5 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 4 kW | 5.5 HP | 1500 rpm (synchronous) | C1 |
Datasheet-491.pdf
Associated selection rows: 420
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 420. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 4 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D112M | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2900 | (rpm) | — |
| CURRENT / FULL LOAD | 25 / 12.5 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 550 | % | — |
| TORQUE / FULL LOAD TORQUE | 13.1 | (Nm) | — |
| TORQUE / STARTING TORQUE | 160 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 74.6 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 93 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 43.2 | kgs | — |
| BEARINGS / DRIVE END | 6306ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
TECO Single Phase Cast Iron Frame – BECY — technical configurations, part 2 of 2
Product: P048. Product page: https://electricmotors.teco.com.au/product/teco-single-phase-cast-iron-frame-motors/
Datasheet-498.pdf
Associated selection rows: 421
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 421. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 4 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D112M | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1440 | (rpm) | — |
| CURRENT / FULL LOAD | 25 / 12.5 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 540 | % | — |
| TORQUE / FULL LOAD TORQUE | 26.5 | (Nm) | — |
| TORQUE / STARTING TORQUE | 190 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 210 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 79 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 87 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 47.4 | kgs | — |
| BEARINGS / DRIVE END | 6306ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
5.5BE2-7.5BE2-5.5BE4.pdf
Associated selection rows: 422
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132S | as printed | — |
| Identity / drawing_number | 5.5BE2 / 7.5BE2 / 5.5BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 508 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 310 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 132 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 216 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 89 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 199 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 54 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 273 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
| Drawing note / 6 | Another collected PDF has the same visible BECY D132S BE ratings and selected dimensions but a different file identity. Both sources are retained; no hash-based identity is inferred from visual similarity. | as printed | — |
Electrical ratings as printed — P048, 5.5BE2-7.5BE2-5.5BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 5.5/7.5 kW | 7.5/10 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 5.5 kW | 7.5 HP | 1500 rpm (synchronous) | C1 |
Datasheet-493.pdf
Associated selection rows: 422
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 422. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 7.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D132M | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2930 | (rpm) | — |
| CURRENT / FULL LOAD | 40 / 20 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 680 | % | — |
| TORQUE / FULL LOAD TORQUE | 24.5 | (Nm) | — |
| TORQUE / STARTING TORQUE | 240 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 230 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 81.2 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 99 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 80 | kgs | — |
| BEARINGS / DRIVE END | 6308ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
7.5BE4.pdf
Associated selection rows: 423
PDFdrawings-500.zip > 132M FRAME/7.5BE4.pdf.
Source differences and limitations
- 7.5BE4 prints axial mounting-hole centres 170 and overall length 546. Its printed axial chain 80 + 89 + 170 + 199 totals 538, not 546; 7.5BF4 separately prints 178 for mounting-hole centres. All source values retained; no correction from another mounting inferred.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132M | as printed | — |
| Identity / drawing_number | 7.5BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 546 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 310 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 132 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 216 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 170 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 212 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 89 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 199 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 54 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 273 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
| Drawing note / 6 | The first electrical-rating row is blank; no 2-pole rating is inferred from it. | as printed | — |
Electrical ratings as printed — P048, 7.5BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 4 poles | 7.5 kW | 10 HP | 1500 rpm (synchronous) | C1 |
7.5BF4.pdf
Associated selection rows: 423
PDFdrawings-500.zip > 132M FRAME/7.5BF4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132M | as printed | — |
| Identity / drawing_number | 7.5BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 596 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 516 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø28 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø300 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø230 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø265 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 310 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Additional flange tapped holes | 2-M12 Tap | as printed | C1 |
| Drawing / Shaft height and tolerance | 132 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 216 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 178 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 212 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 139 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 54 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
| Drawing note / 6 | The first electrical-rating row is blank; no 2-pole rating is inferred from it. | as printed | — |
Electrical ratings as printed — P048, 7.5BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 4 poles | 7.5 kW | 10 HP | 1500 rpm (synchronous) | C1 |
7.5BV4.pdf
Associated selection rows: 423
PDFdrawings-500.zip > 132M FRAME/7.5BV4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132M | as printed | — |
| Identity / drawing_number | 7.5BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 546 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 466 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø28 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø300 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø230 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø265 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Side-view vertical envelope including projections | 336 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Additional flange tapped holes | 2-M12 Tap | as printed | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
| Drawing note / 6 | The first electrical-rating row is blank; no 2-pole rating is inferred from it. | as printed | — |
Electrical ratings as printed — P048, 7.5BV4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 4 poles | 7.5 kW | 10 HP | 1500 rpm (synchronous) | C1 |
Datasheet-500.pdf
Associated selection rows: 423
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 423. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 7.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D132M | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1455 | (rpm) | — |
| CURRENT / FULL LOAD | 42 / 21 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 530 | % | — |
| TORQUE / FULL LOAD TORQUE | 49 | (Nm) | — |
| TORQUE / STARTING TORQUE | 210 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 180 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 80.5 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 92 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 81 | kgs | — |
| BEARINGS / DRIVE END | 6308ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
5.5BE2 , 7.5BE2 , 5.5BE4.pdf
Associated selection rows: 424, 425
PDFdrawings-499.zip > 132S FRAME/5.5BE2 , 7.5BE2 , 5.5BE4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132S | as printed | — |
| Identity / drawing_number | 5.5BE2 / 7.5BE2 / 5.5BE4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 508 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø22 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 310 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Shaft height and tolerance | 132 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 216 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft shoulder to nearer foot-hole centre | 89 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Rear foot-hole centre to fan end | 199 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 54 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Front-view body width callout | 273 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT MOUNTED IM1001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
| Drawing note / 6 | Another collected PDF has the same visible BECY D132S BE ratings and selected dimensions but a different file identity. Both sources are retained; no hash-based identity is inferred from visual similarity. | as printed | — |
Electrical ratings as printed — P048, 5.5BE2 , 7.5BE2 , 5.5BE4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 5.5/7.5 kW | 7.5/10 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 5.5 kW | 7.5 HP | 1500 rpm (synchronous) | C1 |
5.5BF2 , 7.5BF2 , 5.5BF4.pdf
Associated selection rows: 424, 425
PDFdrawings-499.zip > 132S FRAME/5.5BF2 , 7.5BF2 , 5.5BF4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132S | as printed | — |
| Identity / drawing_number | 5.5BF2 / 7.5BF2 / 5.5BF4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 558 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 478 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø28 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø300 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø230 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø265 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Height from foot mounting plane to topmost drawn projection | 310 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Additional flange tapped holes | 2-M12 Tap | as printed | C1 |
| Drawing / Shaft height and tolerance | 132 +0/-0.5 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Transverse mounting-hole centres | 216 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall width | 250 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Axial mounting-hole centres | 140 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot overall axial length | 175 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to nearer foot-hole centre | 139 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot slot-group width callout | 45 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot thickness callout | 16 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Lower terminal enclosure height above mounting plane | 54 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Foot mounting holes | 4-Ø12 Holes | drawing units; not explicitly stated on this sheet | C1 |
| Drawing note / 1 | FOOT & FLANGE MOUNTED IM2001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 5.5BF2 , 7.5BF2 , 5.5BF4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 5.5/7.5 kW | 7.5/10 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 5.5 kW | 7.5 HP | 1500 rpm (synchronous) | C1 |
5.5BV2 , 7.5BV2 , 5.5BV4.pdf
Associated selection rows: 424, 425
PDFdrawings-499.zip > 132S FRAME/5.5BV2 , 7.5BV2 , 5.5BV4.pdf.
Source page 1
Conditions for this section:
-
C1: Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
-
C2: Applies to the view and mounting printed on this source only. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| Identity / drawing_title | OUTLINE DIMENSIONS — 1-PHASE INDUCTION MOTOR | as printed | — |
| Identity / frame | D132S | as printed | — |
| Identity / drawing_number | 5.5BV2 / 7.5BV2 / 5.5BV4 | as printed | — |
| Identity / construction | Totally Enclosed Fan Cooled Capacitor-Start & Run Type; Squirrel-Cage Rotor | as printed | — |
| Identity / date_as_printed | 01.10.09 | as printed | — |
| Drawing / Overall axial length | 508 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange face to fan end | 428 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft extension | 80 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key length callout | 56 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to terminal enclosure outer edge | 294 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-centre to cable-entry axis | 192 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Cable-entry diameter | Ø28 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft diameter and fit | Ø38 k6 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Key width | 10 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-and-key top height | 41 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft keyseat lower-height callout | 33 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Shaft-end thread and depth | M12 TAP DEEP 18 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange outer diameter | Ø300 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange pilot diameter and fit | Ø230 h7 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange bolt pitch-circle diameter | Ø265 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange thickness | 20 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Flange register projection | 4 | drawing units; not explicitly stated on this sheet | C1 |
| Drawing / Side-view vertical envelope including projections | 336 | drawing units; not explicitly stated on this sheet | C2 |
| Drawing / Flange bolt holes | 4-Ø15 Holes | as printed | C1 |
| Drawing / Flange hole angular offset | 45 | degrees | C1 |
| Drawing / Additional flange tapped holes | 2-M12 Tap | as printed | C1 |
| Drawing note / 1 | FLANGE MOUNTED IM3001. | as printed | — |
| Drawing note / 2 | TYPICAL DIMENSIONS ONLY. FOR CERTIFIED DIMENSIONS REFER TO TECO. | as printed | — |
| Drawing note / 3 | FOR BELT OR DIRECT DRIVE. | as printed | — |
| Drawing note / 4 | Dimensional units are not explicitly stated on this sheet; values and tolerances are transcribed as printed. | as printed | — |
| Drawing note / 5 | SYNCH RPM is synchronous speed, not a measured full-load speed. Slash-separated ratings are retained as alternatives, not numeric ranges. | as printed | — |
Electrical ratings as printed — P048, 5.5BV2 , 7.5BV2 , 5.5BV4.pdf, page 1
Conditions for this section:
- C1: Each row belongs only to this exact drawing and mounting; slash-separated alternatives are retained as printed. Ratings and named mechanical dimensions apply only to this source configuration. Refer to the drawing for graphical shape and unnamed symbols. Typical dimensions only; refer to TECO for certified dimensions.
| Configuration / printed row | POLES | kW | HP | SYNCH RPM | Conditions |
|---|---|---|---|---|---|
| 1 | 2 poles | 5.5/7.5 kW | 7.5/10 HP | 3000 rpm (synchronous) | C1 |
| 2 | 4 poles | 5.5 kW | 7.5 HP | 1500 rpm (synchronous) | C1 |
Datasheet-492.pdf
Associated selection rows: 424
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 424. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 5.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 2 | — | |
| FRAME | D132S | — | |
| SPEED / SYNCHRONOUS | 3000 | (rpm) | — |
| SPEED / FULL LOAD | 2930 | (rpm) | — |
| CURRENT / FULL LOAD | 30 / 15 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 800 | % | — |
| TORQUE / FULL LOAD TORQUE | 18 | (Nm) | — |
| TORQUE / STARTING TORQUE | 280 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 260 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 79.2 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 96 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 77 | kgs | — |
| BEARINGS / DRIVE END | 6308ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Datasheet-499.pdf
Associated selection rows: 425
Source differences and limitations
- Website/source difference — VOLTAGE: website 240; PDF page 1 240/480. Website row IDs: 425. Neither is automatically substituted for the other.
Source page 1
| Specification | Value | Unit / basis | Conditions |
|---|---|---|---|
| MOTOR SERIES | TECO BECY SINGLE PHASE TEFC | — | |
| START METHOD | DIRECT ONLINE | — | |
| KW RATING | 5.5 | — | |
| VOLTAGE | 240/480 | (V) | — |
| PHASES | 1 | — | |
| FREQUENCY | 50 | (Hz) | — |
| NO OF POLES | 4 | — | |
| FRAME | D132S | — | |
| SPEED / SYNCHRONOUS | 1500 | (rpm) | — |
| SPEED / FULL LOAD | 1465 | (rpm) | — |
| CURRENT / FULL LOAD | 33 / 16.5 | (Amps) | — |
| CURRENT / LOCKED ROTOR | 590 | % | — |
| TORQUE / FULL LOAD TORQUE | 36 | (Nm) | — |
| TORQUE / STARTING TORQUE | 250 | % | — |
| TORQUE / MINIMUM TORQUE | Not stated (blank in source) | % | — |
| TORQUE / BREAKDOWN TORQUE | 220 | % | — |
| ROTOR INERTIA (J = GD²/4) | Not stated (blank in source) | (Kgm²) | — |
| EFFICIENCY / 100% LOAD | 80.5 | % | — |
| EFFICIENCY / 75% LOAD | Not stated (blank in source) | % | — |
| EFFICIENCY / 50% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 100% LOAD | 88 | % | — |
| POWER FACTOR / 75% LOAD | Not stated (blank in source) | % | — |
| POWER FACTOR / 50% LOAD | Not stated (blank in source) | % | — |
| INSULATION CLASS | Not stated (blank in source) | — | |
| ENCLOSURE TYPE | TEFC | — | |
| IP RATING | 44 | — | |
| WEIGHT OF MOTOR | 75 | kgs | — |
| BEARINGS / DRIVE END | 6308ZZ | — | |
| BEARINGS / NON DRIVE END | 6306 ZZ | — | |
| NO LOAD SOUND PRESSURE LEVEL @ 1M | Not stated (blank in source) | dbA | — |
| DESIGN STANDARD | AS1359 | — | |
| CERTIFICATION | Not stated (blank in source) | — | |
| TEMPERATURE RISE ABOVE AMBIENT | Not stated (blank in source) | — |
Downloads, customisation and support
Download our single-phase catalogue. Individual datasheets, PDF archives and CAD downloads are linked with the selections above. We can help with mounting options, terminal-box arrangements, 3D files and certified dimensions.
No separate operating manual is attached in the collected BECY product pack. Contact our team for the installation instructions and modifications relevant to your motor. Historical catalogue contact details are replaced here by our current contact-page link.
Company documents
- TAC-EMD-Standard-Conditions-of-Sale-Final-May-2022.pdf
- ISO9001-Intertek-SAI-Global-Certificate-QEC3088-Expiry-25-May-2029.pdf
- ISO45001-Intertek-SAI-Global-Certificate-0185118-Expiry-22-August-2027.pdf
These company references have their own scope; they are not motor-specific approvals.
Source editions: TECO1PH-032014 catalogue and individual configuration sheets collected 15 October 2026. Product-page wording checked 27 October 2026. Source differences and original document identities remain traceable.