Product

Product Facts

Product Name: TECO MAXeV4 IE4 Super Premium Efficiency Electric Motor | Drop-in & Energy-efficient Industrial Motor - TECO Electric Motors Australia and New Zealand
Category: Industrial Equipment & Machinery > Electric Motors

TECO · ELECTRIC MOTORS · PRODUCT GUIDE

MAXeV4 IE4 electric motors

Super premium efficiency. Practical installation. Local support.

Our MAXeV4 range brings IE4 efficiency to energy-intensive operations across Australia and New Zealand. With cast iron construction, IP66 protection and a conventional squirrel-cage induction design, we combine lower energy use with practical installation and serviceability.

We offer published ratings from 0.75 kW to 315 kW, with 2, 4 and 6 pole configurations. Tell us about your load, supply, mounting and operating conditions, and we’ll help you select the right configuration and discuss any modifications you need.

Talk to our team · View our MAXeV4 brochure

Built for demanding operation

Our published range specification combines a totally enclosed, fan-cooled construction with an IC411 shaft-mounted fan. The cast iron housing and balanced rotor support mechanical stability; IP66 protection addresses dust and water-jet exposure. Our Class H insulation system is rated at 180°C, with a published Class B temperature rise of 80°C. These are insulation and temperature-rise classifications, not a blanket ambient-temperature rating.

Our top-mounted terminal box can rotate through four 90° positions to help with cable entry. PTC 150°C thermistors are included in the general range specification for frames 160 and above; thermal protection for smaller frames is an option to discuss with us. Check the individual sheet for the selected motor’s terminal arrangement and protection details.

Starting, speed control and retrofit selection

You can use MAXeV4 with direct-on-line starting or a variable speed drive. Our brochure also describes operation with soft starters. A VSD is not mandatory simply because the motor is IE4. Match the starting method, drive settings, load and cooling requirements to your application.

We design the range around IEC 60072-1 mounting dimensions to support replacement of standard IE2 and IE3 motors. Before treating a motor as a drop-in replacement, compare the exact frame, shaft, mounting orientation, coupling, overall dimensions and electrical requirements. Foot, flange, and foot-and-flange information is kept separate below; a similar frame designation does not establish interchangeability.

Our squirrel-cage design supports servicing by qualified local motor repairers using conventional tools. The brochure compares this approach with typical IE3 and synchronous-reluctance/permanent-magnet technologies; those comparisons describe the brochure’s positioning rather than every competing motor design.

Efficiency Level

MAXeV4 brochure · page 6

Product specification

Feature	Specification
Efficiency Level	IE4 Super Premium Efficiency
Power range	0.75 kW to 315 kW
Construction	Cast iron housing, balanced rotor to reduce vibration and extend service life
Cooling Method	IC411 shaft-mounted fan for stable thermal performance
Protection Rating	IP66 – totally enclosed, dust-tight and protected against high-pressure water jets; ideal for harsh or outdoor environments
Insulation Class	Class H insulation (180°C) with Class B (80°C)temperature rise
Terminal Box	Top-mounted, 4 x 90° rotation for flexible cable entry
Thermal Protection	PTC150°C thermistors for frames 160 and above, ideal for VSD integration
Compatibility	Matches legacy IE2 and IE3 frame and shaft dimensions
Duty Type	S1 (Continuous duty)
Frame Sizes	Available from 80 to 355L
Pole Options	2, 4, and 6 pole configurations

Why the MAXeV4 Outperforms Conventional Motors

MAXeV4 brochure · page 7

Supplier motor comparison

Feature	TECO MAXeV4Squirrel-cage motor*	Typical IE3 Motor	SynRM/PM Motor
Efficiency Class	IE4	IE3	IE4–IE5
VSD Required?	Optional	Optional	Always required
Retrofit Compatibility	Drop-in (IE2/IE3)	Direct match	Often needs redesign
Repairability*	Easy, squirrel cage induction motor	Easy	Complex (specialist only)

Our brochure compares these motor technologies at a general level. Suitability, servicing and repair options depend on the specific motor and installation.

Conditions in the individual specification sheets

The 157 collected specification sheets state the following conditions. These apply to those sheet configurations; they are not an extension of the brochure’s range or an outdoor approval.

Item	Sheet condition
Ambient temperature	−15 to +40°C
Humidity	Below 90% RH
Altitude	Up to 1,000 m
Enclosure location	Indoor
Service factor	1.0
Rotation	Bidirectional operation available; confirm the required direction and drive arrangement.
Fan / fan cover	Plastic fan / steel-plate fan cover

Our brochure describes outdoor and washdown applications, while the individual specification sheets say indoor. Please confirm the selected enclosure and coating with our team. The 90 kW / 4-pole outdoor-paint appendix is specific to that document and differs from its specification-page finish; it is not the standard coating for the whole range.

Where MAXeV4 fits

We support pumps, fans, compressors, water treatment, irrigation, OEM machinery and project installations. Our website also positions MAXeV4 for mining and other demanding industrial operations. For continuous-duty equipment, efficiency can make a meaningful difference over long operating hours.

For a retrofit, we’ll work through your shutdown window and mechanical fit. For a new installation, we’ll discuss the load profile, environment and control method. References to oil and gas or harsh industrial environments do not establish hazardous-area approval: let us confirm the specific motor and documentation required for your site.

A starting point for your application

The purchase price of the motor is the starting point. We can work with you through our ModShop capability to tailor the motor to your application. Our published options include the following; suitability and availability depend on the selected configuration.

Requirement	Options to discuss with us
Supply and cooling	1000 V motors; airstream-rated IC418 arrangements; forced cooling IC416; cooling-tower applications
Moisture, weather and contamination	Anti-condensation heaters; rain covers for vertical shaft-down motors; dust covers; special paint systems and colours; stainless steel fasteners
Temperature protection	Winding and/or bearing resistance temperature detectors (RTDs); thermistor protection on frames below D160; auxiliary terminal boxes for thermistor, heater and RTD terminations
Motion and mechanical arrangement	Electromechanical fail-safe brake motors; crane-rated motors; double or non-standard shaft extensions; encoder/tacho arrangements
Bearings and condition monitoring	Insulated bearings; rotor grounding brush or fibre earthing ring; SPM vibration studs; vibration sensors
Connections and other duties	Extended/flying leads; induction-generator arrangements; other requirements on request

These are application-dependent modifications, not a statement that every option is standard or available in every combination.

Efficiency and the cost of ownership

The motor’s purchase and any customisation costs are one part of the investment. Electricity use over its operating life is another. Our brochure illustrates a lifetime-cost split of 95% energy, 3% maintenance and 2% initial capital cost, citing the IEA/EMSA motor-systems report. That split is an illustration, not a prediction for your installation.

Our published four-pole comparison shows gains of up to 4% against IE3 and 7.7% against IE2. The brochure also illustrates payback of up to two years against IE2 and three years against IE3, together with longer-term savings examples. Actual savings and payback depend on the selected rating, operating hours, load, electricity price and installed cost. The comparison, savings and payback figures below remain attached to their original conditions; they are not guaranteed outcomes.

Lower electricity use can reduce operating costs and associated emissions. For a project estimate, use the duty and efficiency of the specific motor and the applicable electricity-emissions factor. Our savings calculator provides a starting point for the discussion.

Every stage of the TECO MAXeV4’s

MAXeV4 brochure · page 8

4 pole efficiency comparison

4 Pole Motor Output (kW)	IE2 Efficiency (%)	IE3 Efficiency (%)	MAXeV4 Efficiency (%)	Gain vs IE3	Gain vs IE2
0.75 (Small Pumps, HVAC Fans)	79.6	82.5	85.7	+4%	+7.7%
7.5 (Irrigation, Building Services)	88.7	90.4	92.6	+2.4%	+4.4%
22 (Water & Wastewater, Compressors)	91.6	93.0	94.5	+1.6%	+3.2
75 (Process Equipment, Conveyors)	94	95	96	+1%	+2.1%
250 (Large-Scale Plant Drives)	95.1	96	96.7	+0.7%	+1.7%

The 22 kW gain-versus-IE2 cell is printed as +3.2 without a percent sign. We have retained that wording.

EFFICIENCY

MAXeV4 brochure · page 11

Saving vs IE2 — up to AU$473K

Period	0.75 (power axis)	7.5 (power axis)	22 (power axis)	75 (power axis)	250 (power axis)
5 years	$1,069	$5,677	$11,750	$26,500	$69,343
10 years	$2,534	$13,456	$27,849	$62,806	$164,348
15 years	$4,541	$24,113	$49,905	$112,550	$294,514
20 years	$7,291	$38,714	$80,125	$180,703	$472,853

Saving vs IE3 — up to AU$205K

Period	0.75 (power axis)	7.5 (power axis)	22 (power axis)	75 (power axis)	250 (power axis)
5 years	$541	$3,142	$5,986	$13,110	$30,053
10 years	$1,283	$7,448	$14,188	$31,073	$71,228
15 years	$2,298	$13,346	$25,425	$55,683	$127,642
20 years	$3,690	$21,428	$40,820	$89,400	$204,934

Our savings examples are illustrations. Operating hours, tariff, load and purchase price affect the result; these assumptions are not specified on this brochure page.

Both chart axes are labelled Cost Saving (x $1000). The amounts in the tables below are reproduced as printed, without multiplying them by 1000. Our illustrated headline savings are up to AU$473K versus IE2 and AU$205K versus IE3.

0.75

MAXeV4 brochure · page 12

Payback period — printed numeric text beneath bar chart

Upgrade from	0.75 (power axis)	7.5 (power axis)	22 (power axis)	75 (power axis)	250 (power axis)
IE3	[not printed]	2 Years	2 Years	3 Years	3 Years
IE2	[not printed]	2 Years	2 Years	2 Years	2 Years

For 0.75 kW, the chart depicts approximately 3 years when upgrading from IE3 and 2 years from IE2. These are readings from the illustration, not printed numerical table entries or a guarantee for your installation.

Performance by supply and pole count

Our brochure provides separate tables for 400 V / 50 Hz and 460 V / 60 Hz, each with 2, 4 and 6 pole ratings. Use the table matching the intended operating point. The individual configuration sheets later on this page include their own 400, 415, 440 and 460 V entries where printed.

Keep torque and inertia units with their source table: the 50 Hz and 60 Hz tables do not use identical conventions. Do not substitute a brochure value for a different configuration’s sheet, or infer that every possible power/pole/frame combination is offered. Notes and starred ratings stay with the applicable table.

Performance data — 2 pole, 400V 50Hz

MAXeV4 brochure · page 18

2 Pole TEFC, CLASS H, IEC DESIGN CONTINUOUS DUTY 400V 50HZ

Performance data

NOTES 1. The above are typical values based on test according to IEC 60034-2-1:2014 2. Tolerance according to IEC 60034-1 3. Breakdown & Locked rotor torques are shown as average on design voltage 4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely with voltage 5. Data subject to change without notice.

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / N-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR INERTIA J = GD2/4 kg-m2	APPROX. WEIGHT kg
0.75	1	2875	80M	83.5	84.0	83.0	83.0	77.0	66.0	1.56	850	2.49	300	250	320	0.001	20
1.1	1.5	2880	80M	85.2	85.2	83.5	83.0	75.0	63.0	2.25	850	3.65	300	250	320	0.001	28
1.5	2	2905	90S	86.5	86.5	85.7	85.0	80.0	71.0	2.94	850	4.92	230	200	300	0.002	30
2.2	3	2910	90L	88.0	89.0	88.0	86.0	80.0	70.0	4.20	900	7.22	250	220	320	0.003	42
3	4	2905	100L	89.1	89.5	89.2	87.0	85.0	79.0	5.59	900	9.86	280	250	320	0.004	46
4	5.5	2920	112M	90.0	90.3	89.9	88.0	85.0	78.0	7.29	950	13.08	250	220	320	0.006	59
5.5	7.5	2925	132S	90.9	90.9	89.4	88.0	85.0	78.0	9.92	850	17.95	220	210	320	0.011	78
7.5	10	2930	132S	91.7	91.3	89.6	88.0	86.0	80.0	13.4	900	24.44	250	220	350	0.015	92
11	15	2950	160M	92.6	92.6	91.6	89.0	86.0	79.5	19.3	860	35.59	240	195	330	0.048	117
15	20	2950	160M	93.3	92.9	92.9	89.0	86.0	79.0	26.1	930	48.53	265	215	355	0.055	129
18.5	25	2950	160L	93.7	93.4	92.9	88.0	84.5	76.5	32.4	930	59.86	270	215	350	0.063	136
22	30	2950	180M	94.0	93.1	92.6	90.0	87.5	80.0	37.5	950	71.18	290	230	350	0.083	174
30	40	2960	200L	94.5	94.5	94.0	93.0	92.5	91.0	49.3	780	96.74	155	135	265	0.269	270
37	50	2965	200L	94.8	95.0	94.5	93.0	92.5	89.5	60.6	880	119.09	180	155	295	0.297	318
45	60	2965	225M	95.0	94.9	94.4	92.0	91.5	88.5	74.3	745	144.89	140	125	270	0.336	360
55	75	2970	250M	95.3	94.9	93.9	90.0	88.5	84.0	92.6	890	176.78	155	140	330	0.528	498
75	100	2975	280S	95.6	95.3	94.3	90.0	88.0	82.0	126	820	241.03	140	120	280	0.900	588
90	125	2975	280M	95.8	95.6	94.9	90.0	88.0	82.0	151	820	289.20	140	120	280	1.000	650
110	150	2975	315S	96.0	95.7	94.7	90.0	88.0	82.0	184	820	353.45	140	120	280	1.300	780
132	175	2975	315M	96.2	96.0	95.1	90.5	89.5	85.0	219	820	424.18	140	120	280	1.500	860
160	215	2975	315L	96.3	96.1	95.3	90.5	89.5	86.0	265	800	514.14	140	120	250	1.900	1100
200	270	2975	315L	96.5	96.4	95.8	90.5	89.5	87.0	331	800	642.65	140	120	250	2.100	1220
250	335	2975	355M	96.5	96.4	95.8	90.0	89.0	85.0	415	800	803.34	130	115	230	3.400	1900
315	420	2975	355L	96.5	96.4	95.8	90.0	89.0	85.5	524	800	1012.39	130	115	230	3.900	2200

Performance data — 4 pole, 400V 50Hz

MAXeV4 brochure · page 19

4 Pole TEFC, CLASS H, IEC DESIGN CONTINUOUS DUTY 400V 50HZ

Performance data

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / N-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR INERTIA J = GD2/4 kg-m2	APPROX. WEIGHT kg
0.75	1	1440	80M	85.7	86.5	85.0	74.0	64.0	52.0	1.71	650	4.97	230	210	280	0.002	20
1.1	1.5	1445	90S	87.2	87.2	85.5	75.0	66.0	53.0	2.43	750	7.27	240	220	300	0.004	28
1.5	2	1440	90L	88.2	88.2	87.5	76.0	69.0	57.0	3.23	750	9.95	240	220	300	0.004	30
2.2	3	1460	100L	89.5	89.7	89.0	79.0	71.0	58.0	4.49	900	14.38	280	250	350	0.009	42
3	4	1465	100L	90.4	90.6	90.0	80.0	72.0	59.0	5.99	950	19.54	300	200	380	0.012	46
4	5.5	1455	112M	91.1	91.1	90.3	80.0	73.0	61.0	7.92	750	26.24	220	200	380	0.017	59
5.5	7.5	1465	132S	91.9	91.9	91.2	82.0	77.0	66.0	10.5	950	35.84	300	240	380	0.034	78
7.5	10	1465	132M	92.6	92.6	92.0	83.0	78.0	67.0	14.1	950	48.86	320	250	380	0.041	92
11	15	1470	160M	93.3	93.6	93.4	83.5	80.0	72.0	20.4	850	71.43	250	180	260	0.094	122
15	20	1470	160L	93.9	93.6	93.4	83.5	80.0	71.0	27.6	850	97.40	240	190	260	0.121	139
18.5	25	1480	180M	94.2	94.3	94.3	84.5	81.5	74.0	33.5	795	119.29	240	190	260	0.203	191
22	30	1480	180L	94.5	94.5	94.3	84.5	81.5	73.0	39.8	935	141.85	275	215	285	0.232	203
30	40	1480	200L	94.9	94.7	94.4	84.5	80.5	71.5	54.0	795	193.45	220	190	270	0.371	256
37	50	1480	225S	95.2	95.3	95.0	86.0	83.0	75.5	65.2	895	238.68	210	195	270	0.724	341
45	60	1480	225M	95.4	94.8	94.3	86.5	84.0	77.0	78.7	890	290.18	210	185	260	0.832	366
55	75	1480	250M	95.7	95.8	95.5	87.5	84.5	77.5	94.8	865	354.73	205	175	280	1.169	496
75	100	1488	280S	96.0	95.8	95.0	87.5	84.0	75.0	129	800	481.87	160	140	260	2.000	657
90	125	1488	280M	96.1	95.8	95.0	87.5	84.0	75.0	154	800	578.20	160	140	260	2.300	725
110	150	1488	315S	96.3	96.1	95.3	87.5	84.0	75.0	188	740	706.71	180	160	260	4.400	950
132	175	1488	315M	96.4	96.2	95.5	87.5	84.0	75.0	226	740	848.07	180	160	260	4.900	1010
160	215	1488	315L	96.6	96.4	95.7	87.5	84.0	75.0	273	760	1028.09	200	180	260	5.700	1165
200	270	1488	315L	96.7	96.6	96.0	88.0	84.5	76.5	339	760	1285.11	200	180	260	6.300	1370
250	335	1488	355M	96.7	96.6	96.0	89.0	87.0	81.0	419	760	1605.90	150	130	260	8.900	1960
315	420	1488	355L	96.7	96.6	96.2	89.0	87.0	81.0	528	780	2023.80	150	130	260	9.900	2215

Performance data — 6 pole, 400V 50Hz

MAXeV4 brochure · page 20

6 Pole, TEFC, CLASS H, IEC DESIGN CONTINUOUS DUTY, 400V 50HZ

Performance data

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / N-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR INERTIA J = GD2/4 kg-m2	APPROX. WEIGHT kg
0.75	1	950	90S	82.7	82.5	81.1	68.0	60.0	49.0	1.92	550	7.53	210	150	250	0.004	26
1.1	1.5	950	90L	84.5	84.5	82.5	70.0	62.0	51.0	2.68	550	11.06	210	130	250	0.006	30
1.5	2	960	100L	85.9	86.3	84.9	70.0	62.0	48.0	3.60	650	14.91	230	130	300	0.012	42
2.2	3	956	112M	87.4	87.4	85.5	71.0	65.0	53.0	5.12	650	21.96	210	130	280	0.020	54
3	4	967	132S	88.6	88.6	87.0	74.0	68.0	55.0	6.60	660	29.62	210	130	280	0.032	65
4	5.5	969	132M	89.5	89.5	88.7	74.0	69.0	56.0	8.72	695	39.41	210	130	280	0.042	76
5.5	7.5	970	132M	90.5	89.6	88.7	74.0	69.0	56.0	11.9	750	54.12	210	130	280	0.056	88
7.5	10	975	160M	91.3	91.5	91.0	77.0	71.0	58.5	15.4	780	73.43	275	250	285	0.126	131
11	15	970	160L	92.3	92.0	92.0	78.0	72.5	61.5	22.1	800	108.20	275	260	290	0.168	156
15	20	980	180L	92.9	93.0	93.5	80.0	74.5	63.5	29.1	800	146.07	275	230	290	0.414	208
18.5	25	980	200L	93.4	94.0	93.0	85.0	84.0	74.0	33.6	645	180.21	200	165	230	0.698	292
22	30	980	200L	93.7	93.8	92.8	85.5	82.0	74.0	39.6	695	214.25	220	180	245	0.756	315
30	40	980	225M	94.2	94.4	94.4	85.0	82.5	75.0	54.1	725	292.24	225	190	245	1.140	381
37	50	985	250M	94.5	94.9	94.9	85.0	81.5	73.0	66.5	740	358.56	175	165	275	1.503	498
45	60	988	280S	94.8	94.8	94.2	85.0	82.0	74.0	80.6	720	435.37	180	160	250	2.700	786
55	75	988	280M	95.1	95.1	94.8	85.5	82.0	74.0	97.6	720	532.19	180	160	250	3.200	895
75	100	990	315S	95.4	95.3	94.5	85.5	82.0	74.0	133	720	724.17	200	180	260	5.800	985
90	125	990	315M	95.6	95.5	94.8	85.5	82.0	74.0	159	720	869.07	200	180	260	6.500	1020
110	150	990	315L	95.8	95.8	95.3	85.5	82.5	74.0	194	720	1062.42	140	120	240	7.600	1150
132	175	990	315L	96.0	96.0	95.3	85.5	82.5	75.0	232	720	1274.32	140	120	240	8.600	1260
160	215	990	355M	96.2	96.0	95.3	85.0	81.5	72.5	282	720	1545.08	140	120	250	8.750	1620
200	270	990	355M	96.3	96.2	95.6	85.0	81.5	72.5	353	720	1931.59	140	120	250	10.000	1770
250	335	990	355L	96.5	96.4	95.8	85.5	82.0	73.0	437	720	2414.24	160	140	250	12.250	2090

Performance data — 2 pole, 460V 60Hz

MAXeV4 brochure · page 21

2 Pole , TEFC, CLASS H, IEC DESIGN CONTINUOUS DUTY, 460V 60HZ

Performance data

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / kg-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR GD2 kg-m2	APPROX. WEIGHT kg
0.75	1	3483	80M	83.5	84.0	83.0	86.0	81.0	72.0	1.31	920	0.210	340	260	360	0.004	19
1.1	1.5	3485	80M	85.5	85.5	83.7	86.0	81.0	72.0	1.88	950	0.307	350	260	380	0.005	21
1.5	2	3514	90S	86.5	86.5	85.7	86.0	82.0	73.0	2.53	900	0.415	230	200	300	0.007	25
2.2	3	3515	90L	88.5	89.1	88.0	86.0	82.0	74.0	3.63	950	0.609	250	220	320	0.010	28
3	4	3510	100L	89.5	89.5	88.5	88.0	85.0	79.0	4.78	920	0.832	250	250	320	0.016	39
4	5.5	3524	112M	89.5	90.3	89.2	90.0	87.0	81.0	6.23	950	1.104	250	220	320	0.023	47
5.5	7.5	3530	132S	90.2	90.2	89.4	89.0	86.0	79.0	8.60	850	1.516	220	210	320	0.042	61
7.5	10	3530	132S	91.7	91.7	90.4	90.0	87.0	80.0	11.4	950	2.067	240	220	350	0.058	74
11	15	3550	160M	92.4	92.1	90.6	89.0	87.0	82.0	16.8	885	3.015	205	190	310	0.192	117
15	20	3555	160M	92.4	92.2	91.1	89.0	86.5	79.5	22.9	990	4.105	220	180	320	0.218	129
18.5	25	3550	160L	93.0	93.0	92.2	89.0	86.0	79.0	28.1	990	5.071	220	180	320	0.250	136
22	30	3555	180M	93.0	92.9	91.8	89.5	86.5	80.0	33.2	990	6.021	220	180	320	0.330	174
30	40	3565	200L	93.6	93.3	91.8	92.0	91.5	89.0	43.7	930	8.188	200	150	250	1.074	270
37	50	3565	200L	94.1	94.1	93.4	92.0	91.5	89.0	53.6	980	10.10	160	145	275	1.187	318
45	60	3565	225M	94.5	94.5	93.9	92.0	92.0	89.0	65.0	810	12.28	140	130	275	1.345	360
55	75	3570	250M	94.5	94.3	93.1	90.5	89.0	84.5	80.7	990	14.99	150	110	275	2.111	498
75	100	3570	280S	95.0	94.5	93.2	90.0	88.0	82.0	110	850	20.47	140	120	300	2.400	588
90	125	3575	280M	95.4	94.8	93.3	90.0	87.6	81.0	132	850	24.53	180	160	300	2.800	650
110	150	3575	315S	95.4	94.7	93.1	90.0	87.7	81.7	161	850	29.98	170	150	300	4.800	780
132	175	3575	315M	95.8	95.4	94.4	91.0	89.5	85.1	190	820	35.98	160	140	300	5.600	860
160	215	3575	315L	95.8	95.3	94.1	90.5	89.5	85.7	232	800	43.61	140	120	250	7.600	1100
200	270	3575	315L	96.2	95.8	94.7	91.0	89.9	86.0	287	800	54.52	150	130	260	8.400	1220
250	335	3575	355M	96.2	95.7	94.5	89.5	87.7	82.3	364	800	68.15	140	120	250	13.60	1700
315	420	3575	355L	96.2	95.8	94.8	90.0	88.6	84.0	457	800	85.9	130	110	240	16.00	2000

Performance data — 4 pole, 460V 60Hz

MAXeV4 brochure · page 22

4 Pole, TEFC, CLASS H, 40°C AMBIENT TEMPERATURE, IEC DESIGN CONTINUOUS DUTY, 460V 60HZ

NOTES 1. The above are typical values based on test according to IEC 60034-2-1:2014 2. Tolerance according to IEC 60034-1 3. Breakdown & Locked rotor torques are shown on design voltage 4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely with voltage 5. Data subject to change without notice.

Performance data

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / kg-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR GD2 kg-m2	APPROX. WEIGHT kg
0.75	1	1747	80M	85.7	86.5	85.0	75.0	68.0	56.0	1.46	700	0.418	230	210	280	0.008	20
1.1	1.5	1750	90S	87.5	87.2	85.5	75.0	69.0	57.0	2.10	750	0.612	240	220	300	0.014	28
1.5	2	1747	90L	88.5	88.5	87.5	77.0	71.0	60.0	2.76	750	0.835	240	220	300	0.017	30
2.2	3	1765	100L	91.0	91.0	89.7	80.0	74.0	64.0	3.79	900	1.213	240	220	350	0.035	42
3	4	1768	100L	91.0	91.4	90.3	81.0	76.0	66.0	5.11	950	1.651	260	200	360	0.046	46
4	5.5	1757	112M	91.0	91.0	90.1	82.0	77.0	69.0	6.73	750	2.215	220	200	320	0.066	59
5.5	7.5	1770	132S	92.4	92.4	91.2	83.0	78.0	69.0	9.00	1000	3.023	300	240	380	0.136	78
7.5	10	1770	132M	92.4	92.6	92.0	84.0	79.0	70.0	12.1	1000	4.123	320	250	380	0.163	92
11	15	1775	160M	93.6	93.9	93.6	84.0	81.0	73.0	17.6	920	6.030	210	195	295	0.374	122
15	20	1775	160L	94.1	94.3	93.9	84.5	81.0	73.0	23.7	990	8.223	200	175	280	0.484	139
18.5	25	1775	180M	94.5	94.5	94.2	85.0	82.5	76.0	28.9	750	10.14	180	170	240	0.812	191
22	30	1775	180L	94.5	94.7	94.4	85.0	82.0	75.0	34.4	990	12.06	180	170	240	0.928	203
30	40	1780	200L	95.0	95.0	94.7	85.5	82.5	74.5	46.4	905	16.40	180	170	240	1.484	256
37	50	1785	225S	95.4	95.3	94.7	86.5	84.0	77.0	56.3	990	20.17	150	145	225	2.897	341
45	60	1780	225M	95.4	95.4	95.1	87.0	84.5	78.0	68.0	990	24.60	150	145	225	3.326	366
55	75	1780	250M	95.8	95.6	95.1	87.5	85.0	78.0	82.4	950	30.06	150	145	225	4.674	496
75	100	1785	280S	96.2	95.9	95.1	88.0	85.0	78.0	111	760	40.94	190	160	280	8.000	657
90	125	1785	280M	96.2	95.9	95.1	88.0	85.2	78.0	133	760	49.13	200	170	300	9.200	725
110	150	1788	315S	96.2	95.9	95.1	88.0	85.2	78.0	163	780	59.95	200	170	300	17.60	950
132	175	1788	315M	96.5	96.2	95.3	88.5	85.5	78.2	194	780	71.94	200	170	300	19.60	1010
160	215	1788	315L	96.5	96.3	95.7	88.5	85.6	78.2	235	800	87.2	210	180	300	22.80	1100
200	270	1788	315L	96.5	96.3	95.7	89.0	86.4	79.2	292	820	109.0	220	185	300	25.20	1370
250	335	1788	355M	96.8	96.5	95.9	89.5	87.4	81.0	362	820	136.3	160	140	300	35.60	1760
315	420	1788	355L	96.8	96.6	95.9	89.5	87.5	82.2	456	820	171.7	160	140	300	39.60	2020

Performance data — 6 pole, 460V 60Hz

MAXeV4 brochure · page 23

6 Pole, TEFC, CLASS H, 40°C AMBIENT TEMPERATURE, IEC DESIGN CONTINUOUS DUTY, 460V 60HZ

Performance data

Performance data as printed

OUTPUT / kW	OUTPUT / hp	FULL LOAD / rpm	FRAME NO.	EFFICIENCY / FULL LOAD / (%)	EFFICIENCY / 3/4 LOAD / (%)	EFFICIENCY / 1/2 LOAD / (%)	POWER FACTOR / FULL LOAD / (%)	POWER FACTOR / 3/4 LOAD / (%)	POWER FACTOR / 1/2 LOAD / (%)	CURRENT / FULL LOAD / (A)	CURRENT / LOCKED ROTOR / %FLC	TORQUE / FULL LOAD / kg-m	TORQUE / LOCKED ROTOR / %FLT	TORQUE / PULL UP / %FLT	TORQUE / BREAK DOWN / %FLT	ROTOR GD2 kg-m2	APPROX. WEIGHT kg
0.75	1	1155	90S	84.0	83.8	81.5	69.0	62.0	50.0	1.62	550	0.632	210	150	250	0.016	26
1.1	1.5(*)	1155	90L	86.5	86.7	85.2	70.0	63.0	51.0	2.28	550	0.927	210	130	250	0.023	30
1.5	2(*)	1165	100L	88.0	88.3	86.6	71.0	64.0	52.0	3.01	650	1.253	210	130	250	0.047	42
2.2	3(*)	1161	112M	89.5	89.5	87.8	72.0	65.0	54.0	4.28	650	1.844	210	130	280	0.080	54
3	4	1169	132S	90.2	89.9	87.0	74.0	68.0	55.0	5.64	700	2.497	210	130	280	0.126	65
4	5.5	1170	132M	90.2	90.2	88.7	74.0	69.0	56.0	7.52	720	3.326	210	130	280	0.166	76
5.5	7.5(*)	1172	132M	90.5	90.5	88.7	74.0	69.0	56.0	10.3	750	4.566	210	130	280	0.224	88
7.5	10	1180	160M	92.4	92.2	91.0	75.5	69.0	56.5	13.5	925	6.184	185	160	280	0.503	131
11	15	1175	160L	93.0	92.7	91.9	76.5	70.0	58.0	19.4	975	9.109	185	160	280	0.672	156
15	20	1180	180L	93.0	93.2	92.5	80.5	75.0	64.5	25.1	940	12.37	185	160	280	1.655	208
18.5	25	1185	200L	94.1	94.2	93.5	86.0	84.0	77.5	28.7	675	15.19	180	135	215	2.791	292
22	30	1185	200L	94.1	93.9	93.1	86.0	83.5	76.5	34.1	810	18.06	180	135	215	3.023	315
30	40	1185	225M	95.0	95.1	94.7	86.0	83.5	77.0	46.1	840	24.63	180	135	215	4.559	381
37	50	1185	250M	95.0	95.1	94.6	83.5	81.0	72.0	58.5	860	30.38	180	135	215	6.011	498
45	60	1190	280S	95.4	95.2	94.4	85.0	81.0	72.5	69.7	720	36.79	200	180	260	10.80	786
55	75	1190	280M	95.4	95.2	94.3	85.0	81.5	73.0	85.1	720	44.97	200	180	260	12.80	895
75	100	1190	315S	95.8	95.6	94.8	85.5	82.5	74.0	115	750	61.32	200	180	260	23.20	985
90	125	1190	315M	95.8	95.7	95.1	85.5	82.5	74.0	138	750	73.59	200	180	260	26.00	1020
110	150	1190	315L	96.2	96.0	95.2	85.5	82.5	74.0	168	720	89.94	140	120	240	30.40	1150
132	175	1190	315L	96.2	96.1	95.5	85.5	82.5	75.0	201	720	107.9	140	120	240	34.40	1260
160	215	1190	355M	96.2	96.0	95.2	85.0	81.5	73.0	246	720	130.8	140	120	240	35.00	1420
200	270	1190	355M	96.2	96.1	95.6	85.0	82.0	74.0	307	720	163.5	140	120	240	40.00	1570
250	335	1190	355L	96.5	96.4	95.8	85.5	82.0	74.0	380	720	204.4	160	140	240	49.00	1900

The 1.1, 1.5, 2.2 and 5.5 kW rows carry an (*) marker in the hp column. Brochure note 6 identifies these as ratings following our TECO performance standard.

Dimensions, mountings and bearings

We provide the brochure’s dimension and bearing tables below, grouped by foot, flange, and foot-and-flange mounting. Read dimensions with their frame, mounting and drawing symbols. Multiple outputs listed inside one cell are ordered source entries; they do not create every possible combination of outputs and poles.

For installation, use the linked original drawing as well as the tables. The drawings define geometry, orientation and callouts that a table alone cannot convey. Some individual drawing callouts have not been transcribed into the structured records on this page. We have not inferred them from another mounting or frame.

Details to confirm before ordering

The brochure’s foot-mount 112M–132M shaft-extension table starts at E; it does not supply shaft diameter D in that table.
Flange-mount pages 200L–225M label overall length L in the drawing but omit it from the tables.
Some combined-mounting bearing headings are inconsistent. We retain their printed labels below rather than assign an unconfirmed bearing end.
On brochure page 47, foot-and-flange entries include 200L A = 31, 225SC A = 35 and 225SC X = 3. The foot-mount table on page 27 prints different values. These require confirmation before dimensional selection; we have not silently corrected them.
Foot-and-flange 315LA/LB X is printed as 55 on page 51; foot-mount X is printed as 75 on page 30. Keep the mounting contexts separate.

Outline dimensions — Foot Mount

MAXeV4 brochure · page 24

Frame No. 80M ~ 100L Outline Dimensions - Foot Mount

Dimensional Tolerances: Refer to page 54. Lifting bolt is available on 100L frame

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	B	B’	BB	BC	BE	C	H	HA	HE
0.75 1.1	--- 0.75	--- ---	80M	125	34	160	175	145	102	51	100	---	142	22	---	50	80	10	108
1.5	1.1	0.75	90S	140	36	176	190	160	112	56	100	---	180	19	---	56	90	12	116
2.2	1.5	1.1	90L	140	36	176	190	160	112	56	125	---	210	19	---	56	90	12	116
3 ---	2.2 3	1.5 ---	100L	160	40	200	210	175	112	56	140	---	215	20	---	63	100	14	133

Dimensions, shaft extension and bearings

FRAME SIZE	K	L	LL	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
80M	10	300	102	M25x1.5	19	40	25	---	9	6	15.5	21.5	M6	6204-ZZ C3	6204-ZZ C3
90S	10	355	112	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3
90L	10	385	112	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3
100L	12	435	112	M32x1.5	28	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3

Outline dimensions — Foot Mount

MAXeV4 brochure · page 25

Frame No. 112M ~ 132M Outline Dimensions - Foot Mount

Dimensional Tolerances: Refer to page 54.

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	B	B’	BB	BC	BE	C	H	HA	HE	K	L
4	4	2.2	112M	190	45	226	219	188	130	65	140	--	248	17	42	70	112	15	144	12	485
5.5 7.5	5.5 ---	3 ---	132S	216	55	262	258	208	130	65	140	--	224	10	42	89	132	18	165	12	507
--- ---	7.5 ---	4 5.5	132M	216	55	262	258	208	130	65	178	--	262	10	42	89	132	18	165	12	545

Dimensions, shaft extension and bearings

FRAME SIZE	LL	O	UB	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
112M	122	42	M32x1.5	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3
132S	122	45	M32X1.5	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3
132M	122	45	M32X1.5	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3

For foot-mounted 112M–132M motors, the lower table starts at shaft extension E. Shaft diameter D is not stated in this table; please confirm it against your selected drawing.

Outline dimensions — Foot Mount

MAXeV4 brochure · page 26

Dimensional Tolerances: Refer to page 54.

Frame No. 160M ~ 180L Outline Dimensions - Foot Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB	BC	C	H	HA
11 15	11 ---	7.5 ---	160M	4	254	60	300	317	270	193	91.5	23	67	210	---	57.5	101.5	300	47	108	160	18
18.5	15	11	160L	4	254	60	300	317	270	193	91.5	23	23	254	210	57.5	101.5	300	47	108	160	18
22	18.5	---	180M	5	279	65	330	354	296	193	91.5	25.5	63.5	241	---	62	100	330	39	121	180	20
---	22	15	180L	5	279	65	330	354	296	193	91.5	25.5	25.5	279	241	62	100	330	39	121	180	20

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	SHAFT EXTENSION / UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
160M	211.5	14.5	652	193	60	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
160L	211.5	14.5	652	193	60	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
180M	237.5	14.5	710	193	70	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3
180L	237.5	14.5	710	193	70	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3

Outline dimensions — Foot Mount

MAXeV4 brochure · page 27

Dimensional Tolerances: Refer to page 54.

Frame No. 200L ~ 250M Outline Dimensions - Foot Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB	BC	C	H	HA
30 37	30	18.5 22	200L	6	318	75	388	448	358	231	110.5	30	30	305	---	76	76	365	52	133	200	24
---	37	---	225SC	6	356	75	431	498	378	231	110.5	32	32	286	---	90	90	350	37.5	149	225	28
45	---	---	225MA	6	356	75	431	498	378	231	110.5	32	32	311	286	90	115	375	37.5	149	225	28
---	45	30	225MC	6	356	75	431	498	378	231	110.5	32	32	311	286	90	115	375	37.5	149	225	28
55	---	---	250MA	7	406	85	480	527.5	430	255	122.5	38	38	349	---	120	120	425	---	168	250	30
---	55	37	250MC	7	406	85	480	527.5	430	255	122.5	38	38	349	---	120	120	425	---	168	250	30

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	SHAFT EXTENSION / UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
200L	288	18.5	764.5	231	80	M50X1.5	55	110	80		30	16	49	59	M20	6312ZZC3	6212ZZC3
225SC	308	18.5	816	231	90	M50X1.5	60	140	110		30	18	53	64	M20	(6312ZZC3) 6313ZZC3	(6212ZZC3) 6213ZZC3
225MA	308	18.5	811	231	90	M50X1.5	55	110	80	---	30	16	49	59	M20	(6312ZZC3) 6313ZZC3	(6212ZZC3) 6213ZZC3
225MC	308	18.5	841	231	90	M50X1.5	60	140	110	---	30	18	53	64	M20	(6312ZZC3) 6313ZZC3	(6212ZZC3) 6213ZZC3
250MA	---	24	977.5	255	105	---	60	140	110		30	18	53	64	M20	6313C3	6313C3
250MC	---	24	977.5	255	105	---	65	140	110		30	18	58	69	M20	6315C3	6313C3

The alternative bearings in parentheses apply to the merged 225SC/225MA/225MC frame group. Please confirm the bearing selection for your configuration.

Outline dimensions — Foot Mount

MAXeV4 brochure · page 28

Frame No. 280SA ~ 280MB Outline Dimensions - Foot Mount

Dimensional Tolerances: Refer to page 54.

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC	C	H	HA
75	---	---	280SA	457	110	560	550	445	255	122.5	38.5	38.5	368	110	110	445	---	190	280	35
---	75	45	280SB	457	110	560	550	445	255	122.5	38.5	38.5	368	110	110	445	---	190	280	35
90	---	---	280MA	457	110	560	550	445	255	122.5	38	38	419	130	137	495	---	190	280	35
---	90	55	280MB	457	110	560	550	445	255	122.5	38	38	419	130	137	495	---	190	280	35

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
280SA	---	24	1037.5	255	140	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280SB	---	24	1037.5	255	140	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3
280MA	---	24	1087.5	255	140	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280MB	---	24	1117.5	255	140	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3

Outline dimensions — Foot Mount

MAXeV4 brochure · page 29

Dimensional Tolerances: Refer to page 54.

Frame No. 315SA ~ 315MB Outline Dimensions - Foot Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC	C	H	HA
110	---	---	315SA	508	130	630	620	524	336	163	64	170	406	230	230	640	---	216	315	35
---	110	75	315SB	508	130	630	620	524	336	163	64	170	406	230	230	640	---	216	315	35
132	---	---	315MA	508	130	630	620	524	336	163	64	119	457	230	230	640	---	216	315	35
---	132	90	315MB	508	130	630	620	524	336	163	64	119	457	230	230	640	---	216	315	35

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315SA	---	28	1246	322	180	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315SB	---	28	1276	322	180	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3
315MA	---	28	1246	322	180	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315MB	---	28	1276	322	180	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3

Outline dimensions — Foot Mount

MAXeV4 brochure · page 30

Frame No. 315LA ~ 315LB Outline Dimensions - Foot Mount

Dimensional Tolerances: Refer to page 54.

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB	BC	C	H	HA
160 200	---	---	315LA	508	115	615	682	574	336	163	75	217	508	---	---	---	780	---	216	315	45
---	160 200	110 132	315LB	508	115	615	682	574	336	163	75	217	508	---	---	---	780	---	216	315	45

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315LA	---	28	1484	322	200	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315LB	---	28	1514	322	200	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3

This brochure page provides dimension tables without a motor illustration. Refer to the selected drawing for geometry.

Outline dimensions — Foot Mount

MAXeV4 brochure · page 31

Outline Dimensions - Foot Mount

Dimensional Tolerances: Refer to page 54.

Frame No. 355MA ~ 355MB

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC	C	H	HA
250	---	---	355MA	610	150	750	810	645	412	189	100	140	560	250	250	800	---	254	355	45
---	250	160 200	355MB	610	150	750	810	645	412	189	100	140	560	250	250	800	---	254	355	45

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355MA	---	28	1714	372	230	---	80	170	140	---	30	22	71	85	M20	6317C3	6317C3
355MB	---	28	1645	372	230	---	110	210	160	---	36	28	100	116	M24	6324C3	6322C3

Outline dimensions — Foot Mount

MAXeV4 brochure · page 32

Outline Dimensions - Foot Mount

Frame No. 355LA ~ 355LB

Dimensional Tolerances: Refer to page 54.

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	A	AA	AB	AC	AD	AG	AS	X	Y	B’	B	BA	BA’	BB	BC	C	H	HA
315	---	---	355LA	610	150	750	810	645	412	189	100	70	560	630	250	250	800	---	254	355	45
---	315	250	355LB	610	150	750	810	645	412	189	100	70	560	630	250	250	800	---	254	355	45

Dimensions, shaft extension and bearings

FRAME SIZE	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355LA	---	28	1714	372	230	---	80	170	140	---	30	22	71	85	M20	6317C3	6317C3
355LB	---	28	1645	372	230	---	110	210	160	---	36	28	100	116	M24	6324C3	6322C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 33

Dimensional Tolerances: Refer to page 54.

Frame No. 80M ~ 90L

Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L
0.75 1.1	--- 0.75	--- ---	80M	12	36.5	165	130	200	12	3.5	167	150	102	51	118	106	300
1.5	1.1	0.75	90S	12	46.5	165	130	200	12	3.5	180	160	112	56	125	126	355
2.2	1.5	1.1	90L	12	46.5	165	130	200	12	3.5	180	160	112	56	125	141	385

Dimensions, shaft extension and bearings

FRAME SIZE	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
80M	102	29	M25x1.5	19	40	25	---	9	6	15.5	21.5	M6	6204-ZZ C3	6204-ZZ C3
90S	112	31	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3
90L	112	31	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 34

Dimensional Tolerances: Refer to page 54.

Frame No. 100L ~ 112M Outline Dimensions - Flange Mount

Fig 2 Fig 3

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	BE	HE	HH	L	LL	O
3 ---	2.2 3	1.5 ---	100L	2	13	56	215	180	250	14.5	4	270	180	112	56	---	142	161.5	435	112	37
4	4	2.2	112M	3	14	56	215	180	250	14.5	4	280	195	130	65	46	160	174	485	122	42

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
100L	M32x1.5	28	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3
112M	M32x1.5	28	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 35

Dimensional Tolerances: Refer to page 54.

Frame No. 132S ~ 132M Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	BE	HE	HH	L	LL	O
5.5 7.5	5.5 ---	3 ---	132S	14	76	265	230	300	14.5	4	335	215	130	65	46	170	178	507	122	45
--- ---	7.5 ---	4 5.5	132M	14	76	265	230	300	14.5	4	335	215	130	65	46	170	197	545	122	45

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
132S	M32X1.5	38	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3
132M	M32X1.5	38	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 36

Dimensional Tolerances: Refer to page 54.

Frame No. 160M ~ 180L Outline Dimensions - Flange Mount

Fig 6 Fig 5

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L	LL
11 15	11	7.5	160M	5	15	110	300	250	350	18.5	5	427	270	193	91.5	211.5	155	702	193
18.5	15	11	160L	5	15	110	300	250	350	18.5	5	427	270	193	91.5	211.5	155	702	193
22	18.5	---	180M	6	15	110	300	250	350	18.5	5	476	296	193	91.5	237.5	160	760	193
---	22	15	180L	6	15	110	300	250	350	18.5	5	476	296	193	91.5	237.5	160	760	193

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
160M	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
160L	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
180M	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3
180L	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 37

Dimensional Tolerances: Refer to page 54.

Frame No. 200L ~ 225M

Outline Dimensions - Flange Mount

Fig 7 Fig 8

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH
30	30	18.5	200L	7	17	110	350	300	400	18.5	5	576.5	358	231	107.5	288	185
37	---	22	200L	7	17	110	350	300	400	18.5	5	576.5	358	231	107.5	288	185
---	37	---	225SC	8	20	140	400	350	450	18.5	5	652	377.5	231	107.5	308	186.5
45	---	---	225MA	8	20	110	400	350	450	18.5	5	652	377.5	231	107.5	308	186.5
---	45	30	225MC	8	20	140	400	350	450	18.5	5	652	377.5	231	107.5	308	186.5

Dimensions, shaft extension and bearings

FRAME SIZE	LL	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
200L	231	M50X1.5	55	110	80		30	16	49	59	M20	6312ZZC3	6212ZZC3
225SC	231	M50X1.5	60	140	110	---	30	18	53	64	M20	6313ZZC3	6213ZZC3
225MA	231	M50X1.5	55	110	80		30	16	49	59	M20	6312ZZC3	6212ZZC3
225MC	231	M50X1.5	60	140	110		30	18	53	64	M20	6313ZZC3	6213ZZC3

For flange-mounted 200L–225M motors, the diagram labels L but the tables do not state its value. Please confirm L for your selected configuration.

Outline dimensions — Flange Mount

MAXeV4 brochure · page 38

Dimensional Tolerances: Refer to page 54.

Frame No. 250M Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L
55	---	---	250MA	22	140	500	450	550	18.5	5	738	425	255	122.5	---	231.5	1037.5
---	55	37	250MC	22	140	500	450	550	18.5	5	738	425	255	122.5	---	231.5	1037.5

Dimensions, shaft extension and bearings

FRAME SIZE	LL	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
250MA	255	---	60	140	110	---	30	18	53	64	M20	6313C3	6313C3
250MC	255	---	65	140	110	---	30	18	58	69	M20	6315C3	6313C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 39

Dimensional Tolerances: Refer to page 54.

Frame No. 280SA ~ 280MB Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L
75	---	---	280SA	22	140	500	450	550	18.5	5	717	445	255	122.5	---	238	1137.5
---	75	45	280SB	22	140	500	450	550	18.5	5	717	445	255	122.5	---	238	1137.5
90	---	---	280MA	22	140	500	450	550	18.5	5	717	445	255	122.5	---	238	1187.5
---	90	55	280MB	22	140	500	450	550	18.5	5	717	445	255	122.5	---	238	1217.5

Dimensions, shaft extension and bearings

FRAME SIZE	LL	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
280SA	255	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280SB	255	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3
280MA	255	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280MB	255	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 40

Dimensional Tolerances: Refer to page 54.

Frame No. 315SA ~ 315MB Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L	LL
110	---	---	315SA	25	140	600	550	660	24	6	660	527.5	336	163	---	269	1346	322
---	110	75	315SB	25	170	600	550	660	24	6	660	527.5	336	163	---	269	1346	322
132	---	---	315MA	25	140	600	550	660	24	6	660	527.5	336	163	---	269	1346	322
---	132	90	315MB	25	170	600	550	660	24	6	660	527.5	336	163	---	269	1346	322

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315SA	---	65	140	110	---	30	18	58	69	M20	6316C3	7314C3
315SB	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3
315MA	---	65	140	110	---	30	18	58	69	M20	6316C3	7314C3
315MB	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 41

Dimensional Tolerances: Refer to page 54.

Frame No. 315LA ~ 315LB Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L	LL
160 200	---	---	315LA	30	140	600	550	660	24	6	682	527.5	336	163	---	284	1804	322
---	160 200	110 132	315LB	30	170	600	550	660	24	6	682	527.5	336	163	---	284	1834	322

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315LA	---	65	140	110	---	30	18	58	69	M20	6316C3	7314C3
315LB	---	80	170	140	---	30	22	71	85	M20	6320C3	7316C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 42

Dimensional Tolerances: Refer to page 54.

Frame No. 355MA ~ 355MB

Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L	LL
250	---	---	355MA	30	140	740	680	800	24	6	1026	647.7	412	189	---	302	1705	372
---	250	160 200	355MB	30	170	740	680	800	24	6	1026	647.7	412	189	---	302	1745	372

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355MA	---	80	170	140	---	30	22	71	85	M20	6317C3	7317C3
355MB	---	110	210	160	---	36	28	100	116	M24	6324C3	7322C3

Outline dimensions — Flange Mount

MAXeV4 brochure · page 43

Dimensional Tolerances: Refer to page 54.

Frame No. 355LA ~ 355LB Outline Dimensions - Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	AC	AD	AG	AS	HE	HH	L	LL
315	---	---	355LA	30	140	740	680	800	24	6	1026	647.7	412	189	---	302	1755	372
---	315	250	355LB	30	170	740	680	800	24	6	1026	647.7	412	189	---	302	1795	372

Dimensions, shaft extension and bearings

FRAME SIZE	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355LA	---	80	170	140	---	30	22	71	85	M20	6317C3	7317C3
355LB	---	110	210	160	---	36	28	100	116	M24	6324C3	7322C3

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 44

Dimensional Tolerances: Refer to page 54.

Frame No. 80M ~ 90L Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	Output (kW) / ---	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	B	B’	BB	BC	C	H
0.75 1.1	--- 0.75	--- ---	--- ---	80M	12	36.5	165	130	200	12	3.5	125	34	160	167	145	102	51	100	---	142	22	50	80
1.5	1.1	0.75	---	90S	12	46.5	165	130	200	12	3.5	140	36	176	180	160	112	56	100	---	180	19	56	90
2.2	1.5	1.1	---	90L	12	46.5	165	130	200	12	3.5	140	36	176	180	160	112	56	125	---	210	19	56	90

Dimensions, shaft extension and bearings

FRAME SIZE	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	OPPOSITE DRIVE END / DRIVE END
80M	10	108	10	300	102	29	M25x1.5	19	40	25	---	9	6	15.5	21.5	M6	6204-ZZ C3	6204-ZZ C3
90S	12	116	10	355	112	31	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3
90L	12	116	10	385	112	31	M25x1.5	24	50	32	---	12	8	20	27	M8	6205-ZZ C3	6205-ZZ C3

This bearing table has conflicting labels: OPPOSITE DRIVE END above and DRIVE END below. We have retained the headings; please confirm the bearing-end assignment with our team.

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 45

Dimensional Tolerances: Refer to page 54.

Frame No. 100L ~ 132M Outline Dimensions - Foot and Flange Mount

Fig 2

Fig 3

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	Output (kW) / ---	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	B	B’	BB	BC	BE	C
3 ---	2.2 3	1.5 ---	--- ---	100L	2	13	56	215	180	250	14.5	4	160	40	200	210	175	112	56	140	---	233	20	42	63
4	4	2.2	---	112M	3	14	56	215	180	250	14.5	4	190	45	226	219	188	130	65	140	---	248	17	42	70
5.5 7.5	5.5 ---	3 ---	--- ---	132S	3	14	76	265	230	300	14.5	4	216	55	262	258	208	130	65	140	---	224	10	42	89
--- ---	7.5 ---	4 5.5	--- ---	132M	3	14	76	265	230	300	14.5	4	216	55	262	258	208	130	65	178	---	262	10	42	89

Dimensions, shaft extension and bearings

FRAME SIZE	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING	BEARING / OPPOSITE DRIVE END
100L	100	14	133	12	435	112	37	M32x1.5	28	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3
112M	112	15	144	12	485	122	42	M32x1.5	28	60	40	---	15	8	24	31	M10	6206-ZZ C3	6206-ZZ C3
132S	132	18	165	12	507	122	45	M32X1.5	38	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3
132M	132	18	165	12	545	122	45	M32X1.5	38	80	64	---	18	10	33	41	M12	6208-ZZC3	6208-ZZC3

The first bearing subcolumn is labelled BEARING without specifying an end. Please confirm its end assignment before selection.

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 46

Dimensional Tolerances: Refer to page 54.

Frame No. 160M ~ 180L

Fig 5

Fig 6

Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB
11 15	11	7.5	160M	5	15	110	300	250	350	18.5	5	254	60	300	317	270	193	91.5	23	67	210	---	57.5	101.5	300
18.5	15	11	160L	5	15	110	300	250	350	18.5	5	254	60	300	317	270	193	91.5	23	23	254	210	57.5	101.5	300
22	18.5	---	180M	6	15	110	300	250	350	18.5	5	279	65	330	354	296	193	91.5	25.5	63.5	241	---	62	100	330
---	22	15	180L	6	15	110	300	250	350	18.5	5	279	65	330	354	296	193	91.5	25.5	25.5	279	241	62	100	330

Dimensions, shaft extension and bearings

FRAME SIZE	BC	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
160M	47	108	160	18	211.5	14.5	652	193	60	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
160L	47	108	160	18	211.5	14.5	652	193	60	M40X1.5	42	110	80	---	24	12	37	45	M16	6309ZZC3	6307ZZC3
180M	39	121	180	20	237.5	14.5	710	193	70	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3
180L	39	121	180	20	237.5	14.5	710	193	70	M40X1.5	48	110	80	---	24	14	42.5	51.5	M16	6311ZZC3	6310ZZC3

This page is headed Foot and Flange Mount and includes flange dimensions, although the illustration does not clearly show the flange features. Use the selected motor drawing for installation.

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 47

Fig 7

Fig 8

Dimensional Tolerances: Refer to page 54.

Frame No. 200L ~ 225M Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FIG. NO.	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB
30 37	30	18.5 22	200L	7	17	110	350	300	400	18.5	5	31	75	388	448	358	231	110.5	30	30	305	---	76	76	365
---	37	---	225SC	8	20	140	400	350	450	18.5	5	35	75	431	498	378	231	110.5	3	32	286	---	90	90	350
45	---	---	225MA	8	20	110	400	350	450	18.5	5	356	75	431	498	378	231	110.5	32	32	311	286	90	115	375
---	45	30	225MC	8	20	140	400	350	450	18.5	5	356	75	431	498	378	231	110.5	32	32	311	286	90	115	375

Dimensions, shaft extension and bearings

FRAME SIZE	BC	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
200L	52	133	200	24	288	18.5	764.5	231	80	M50X1.5	55	110	80	---	30	16	49	59	M20	6312ZZC3	6212ZZC3
225SC	37.5	149	225	28	308	18.5	816	231	90	M50X1.5	60	140	110	---	30	18	53	64	M20	(6312ZZC3)	(6212ZZC3)
225MA	37.5	149	225	28	308	18.5	811	231	90	M50X1.5	55	110	80	---	30	16	49	59	M20	6312ZZC3	6213ZZC3
225MC	37.5	149	225	28	308	18.5	841	231	90	M50X1.5	60	140	110	---	30	18	53	64	M20	6312ZZC3	6213ZZC3

Our foot-and-flange table on page 47 prints A=31 for 200L and A=35 for 225SC. The foot-mount table on page 27 prints 318 and 356 respectively. These source values differ; please confirm the selected mounting with our team.

For 225SC, page 47 prints X=3 for foot-and-flange mounting; page 27 prints X=32 for foot mounting. Please confirm the applicable value before installation.

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 48

Dimensional Tolerances: Refer to page 54.

Frame No. 250M

Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	B’	BA	BA’	BB
55	---	---	250MA	22	140	500	450	550	18.5	5	406	85	480	527.5	430	255	122.5	38	38	349	---	120	120	425
---	55	37	250MC	22	140	500	450	550	18.5	5	406	85	480	527.5	430	255	122.5	38	38	349	---	120	120	425

Dimensions, shaft extension and bearings

FRAME SIZE	BC	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
250MA	63.5	168	250	30	---	24	977.5	255	105	---	60	140	110		30	18	53	64	M20	6313C3	6313C3
250MC	63.5	168	250	30	---	24	977.5	255	105	---	65	140	110		30	18	58	69	M20	6315C3	6313C3

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 49

Dimensional Tolerances: Refer to page 54.

Frame No. 280SA ~ 280MB Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC
75	---	---	280SA	22	140	500	450	550	18.5	5	457	110	560	550	445	255	122.5	38.5	38.5	368	110	110	445	---
---	75	45	280SB	22	140	500	450	550	18.5	5	457	110	560	550	445	255	122.5	38.5	38.5	368	110	110	445	---
90	---	---	280MA	22	140	500	450	550	18.5	5	457	110	560	550	445	255	122.5	38	38	419	130	137	495	---
---	90	55	280MB	22	140	500	450	550	18.5	5	457	110	560	550	445	255	122.5	38	38	419	130	137	495	---

Dimensions, shaft extension and bearings

FRAME SIZE	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
280SA	190	280	35	---	24	1037.5	255	140	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280SB	190	280	35	---	24	1037.5	255	140	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3
280MA	190	280	35	---	24	1087.5	255	140	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
280MB	190	280	35	---	24	1117.5	255	140	---	75	140	100	---	30	20	67.5	79.5	M20	6318C3	6316C3

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 50

Dimensional Tolerances: Refer to page 54.

Frame No. 315SA ~ 315MB Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC
110	---	---	315SA	25	140	600	550	660	24	6	508	130	630	620	524	336	163	64	170	406	230	230	640	---
---	110	75	315SB	25	170	600	550	660	24	6	508	130	630	620	524	336	163	64	170	406	230	230	640	---
132	---	---	315MA	25	140	600	550	660	24	6	508	130	630	620	524	336	163	64	119	457	230	230	640	---
---	132	90	315MB	25	170	600	550	660	24	6	508	130	630	620	524	336	163	64	119	457	230	230	640	---

Dimensions, shaft extension and bearings

FRAME SIZE	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315SA	216	315	35	---	28	1246	322	180	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315SB	216	315	35	---	28	1276	322	180	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3
315MA	216	315	35	---	28	1246	322	180	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315MB	216	315	35	---	28	1276	322	180	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 51

Dimensional Tolerances: Refer to page 54.

Frame No. 315LA ~ 315LB Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B’	B	BA	BA’	BB
160 200	---	---	315LA	30	140	600	550	660	24	6	508	115	615	682	574	336	163	55	217	---	508	---	---	780
---	160 200	110 132	315LB	30	170	600	550	660	24	6	508	115	615	682	574	336	163	55	217	---	508	---	---	780

Dimensions, shaft extension and bearings

FRAME SIZE	BC	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
315LA	---	216	315	45	---	28	1484	322	200	---	65	140	110	---	30	18	58	69	M20	6316C3	6314C3
315LB	---	216	315	45	---	28	1514	322	200	---	80	170	140	---	30	22	71	85	M20	6320C3	6316C3

For 315LA/LB, page 51 prints X=55 for foot-and-flange mounting; page 30 prints X=75 for foot mounting. These values apply to separate mounting tables and should not be treated as interchangeable.

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 52

Dimensional Tolerances: Refer to page 54.

Frame No. 355MA ~ 355MB Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B	BA	BA’	BB	BC
250	---	---	355MA	30	140	740	680	800	24	6	610	150	750	810	645	412	189	100	140	560	250	250	800	---
---	250	160 200	355MB	30	170	740	680	800	24	6	610	150	750	810	645	412	189	100	140	560	250	250	800	---

Dimensions, shaft extension and bearings

FRAME SIZE	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355MA	254	355	45	---	28	1714	372	230	---	80	170	140	---	30	22	71	85	M20	6317C3	6317C3
355MB	254	355	45	---	28	1645	372	230	---	110	210	160	---	36	28	100	116	M24	6324C3	6322C3

Outline dimensions — Foot and Flange Mount

MAXeV4 brochure · page 53

Dimensional Tolerances: Refer to page 54.

Frame No. 355LA ~ 355LB Outline Dimensions - Foot and Flange Mount

Outline dimensions and output associations

Output (kW) / 2P	Output (kW) / 4P	Output (kW) / 6P	FRAME SIZE	FLANGE DIMENSION / LA	FLANGE DIMENSION / LE	FLANGE DIMENSION / M	FLANGE DIMENSION / N	FLANGE DIMENSION / P	FLANGE DIMENSION / S	FLANGE DIMENSION / T	A	AA	AB	AC	AD	AG	AS	X	Y	B’	B	BA	BA’	BB
315	---	---	355LA	30	140	740	680	800	24	6	610	150	750	810	645	412	189	100	70	560	630	250	250	800
---	315	250	355LB	30	170	740	680	800	24	6	610	150	750	810	645	412	189	100	70	560	630	250	250	800

Dimensions, shaft extension and bearings

FRAME SIZE	BC	C	H	HA	HE	K	L	LL	O	UB	SHAFT EXTENSION / D	SHAFT EXTENSION / E	SHAFT EXTENSION / EB	SHAFT EXTENSION / EF	SHAFT EXTENSION / EG	SHAFT EXTENSION / F	SHAFT EXTENSION / G	SHAFT EXTENSION / GA	SHAFT EXTENSION / DB	BEARING / DRIVE END	BEARING / OPPOSITE DRIVE END
355LA	---	254	355	45	---	28	1714	372	230	---	80	170	140	---	30	22	71	85	M20	6317C3	6317C3
355LB	---	254	355	45	---	28	1645	372	230	---	110	210	160	---	36	28	100	116	M24	6324C3	6322C3

Selected drawing details and configuration differences

MAXeV4 — Drawing-specific dimensions and applicability

We include the following drawing details to fill gaps in our brochure tables and show where individual drawings differ. They apply only to the identified configuration; they do not overwrite the brochure table or establish universal mounting availability. Geometric views, secondary dimensions and drawing-specific tolerances remain in the original source PDFs indexed with their archive member names.

4 kW / 4P foot, frame 112M

Shaft D = 28 mm, j6 (+0.009/−0.004); E = 60 ±0.37 mm; key length 40 mm; end thread M10 × 15; two M32 × 1.5 cable entries. This supplies the shaft-diameter field omitted from brochure p. 25 for this documented configuration.

P3257440T1 p. 2 — TTAKG25087-053

5.5 kW / 4P foot, frame 132S

Shaft D = 38 mm, k6 (+0.018/+0.002); E = 80 ±0.37 mm; key length 64 mm; end thread M12 × 18; two M32 × 1.5 cable entries. Brochure p. 25 omits D.

P4257032T1 p. 2 — TTAKG25087-054

7.5 kW / 4P foot, frame 132M

Shaft D = 38 mm, k6 (+0.018/+0.002); E = 80 ±0.37 mm; key length 64 mm; end thread M12 × 18; two M32 × 1.5 cable entries. Brochure p. 25 omits D.

P4257421T1 p. 2 — TTAKG25087-055

30 kW / 2P package, vertical flange, frame 200L

Drawing shows 764.5 mm from fan-cover end to shaft tip, 80 mm fan clearance, shaft 55 m6 × 110 mm, 80 mm key, M20 tapped end 30 mm deep; flange M/N/P = 350/300/400 mm, N fit j6, four Ø18.5 holes, T = 5 mm; two M50 × 1.5 and one M20 × 1.5 entries. Important: its drawing header says 4 poles / 1,500 rpm, whereas the paired specification says 2 poles. The outline applicability needs confirmation; these dimensions have not been treated as a confirmed 2-pole fit.

P7257030T1 p. 2 — 32049A293290

37 kW / 4P vertical flange, frame 225S

Drawing shows 816 mm fan-cover end to shaft tip; shaft Ø60 × 140 mm, 110 mm key and M20 tapped end 30 mm deep; flange M/N/P = 400/350/450 mm, N fit j6, eight Ø18.5 holes, T = 5 mm; two M50 × 1.5 and one M20 × 1.5 entries. This supplies the length absent from brochure p. 37 for this configuration.

P7257325T1 p. 2 — 32049A31607

45 kW / 4P vertical flange, frame 225M

Drawing shows 841 mm fan-cover end to shaft tip and 701 mm to flange face; shaft Ø60 m6 × 140 mm, 110 mm key and M20 tapped end 30 mm deep; flange M/N/P = 400/350/450 mm, N fit j6, eight Ø18.5 holes, T = 5 mm; two M50 × 1.5 and one M20 × 1.5 entries. The view labels the transverse envelope 654 mm and terminal-box reach 376 mm; brochure p. 37 gives AC = 652 and AD = 377.5. Keep those claims source-specific.

P7257326T1 p. 2 — 32049A34507

MAXeV4 11 kW / 4-pole foot — drawing dimensions

Source: P6257064T1 p. 2, outline 32049A20011. Model AESV4S, frame 160M, foot mounting IM1001. Drawing shows length 652 mm, shaft diameter 42 mm with k6 fit, shaft extension 110 mm, key length 80 mm; shaft height 160 mm (+0/−0.5), foot-hole centres 254 × 210 mm, four Ø14.5 mm mounting holes and 60 mm fan-side clearance. These are foot-arrangement values, not dimensions of the flange versions. The source bears a FOR APPROVAL stamp; latest approved applicability remains to be confirmed.

MAXeV4 110 kW / 4-pole foot — installation notes from drawing

Source: AC257010T1 p. 2, drawing 3W042D451 revision 00. Frame D315S; direct coupling; IP66; Class H; approximate weight 950 kg; three PTC 150°C thermistors. Drawing bearings: DE 6320C3, opposite DE 6316C3 (SKF/NTN/NSK). Main and thermistor terminal-box entry is on a removable cover to be drilled by the customer. Drawing shows overall length 1276 mm; shaft Ø80 m6, extension 170 mm, key length 140 mm and M20 tapped end, 40 mm deep; shaft height 315 mm (+0/−1); foot-hole centres 508 × 406 mm; four Ø28 mm holes; two M10 ground terminals. The drawing header states 400–415 V, 50 Hz and synchronous speed 1500 rpm. The specification separately provides 60 Hz operating points; synchronous speed is not full-load speed. Do not apply the customer-drilled entry or these dimensions to all MAXeV4 configurations.

MAXeV4 132 kW / 2-pole foot — installation notes from drawing

Source: AC257009T1 p. 2, drawing 3W042D481 revision 02. Drawing frame 315M; direct coupling; IP66; Class H; approximate weight 860 kg; three PTC 150°C thermistors. Bearings: DE 6316C3, opposite DE 6314C3 (SKF/NTN/NSK). Main and thermistor terminal-box entry is on a removable cover to be drilled by the customer. Drawing dimensions in mm: length 1246; shaft diameter 65 with m6 fit; shaft extension 140; key length 110; M20 shaft-end tap, depth 40; shaft height 315 (+0/−1); foot-hole centres 508 × 457; four Ø28 holes; two M10 ground terminals. Drawing header: 400–415 V, 50 Hz, synchronous speed 3000 rpm; this is not full-load speed. The specification provides its own voltage/frequency performance. These notes apply only to this identified configuration. The specification more specifically describes direct flexible coupling.

MAXeV4 132 kW / 4-pole foot — installation notes from drawing

Source: AC257011T1 p. 2, drawing 3W042D480 revision 00. Drawing frame D315M; direct coupling; IP66; Class H; approximate weight 1010 kg; three PTC 150°C thermistors. Bearings: DE 6320C3, opposite DE 6316C3 (SKF/NTN/NSK). Main and thermistor terminal-box entry is on a removable cover to be drilled by the customer. Drawing dimensions in mm: length 1276; shaft diameter 80 with m6 fit; shaft extension 170; key length 140; M20 shaft-end tap, depth 40; shaft height 315 (+0/−1); foot-hole centres 508 × 457; four Ø28 holes; two M10 ground terminals. Drawing header: 400–415 V, 50 Hz, synchronous speed 1500 rpm; this is not full-load speed. The specification provides its own voltage/frequency performance. These notes apply only to this identified configuration.

MAXeV4 200 kW / 2-pole foot — installation notes from drawing

Source: AC257012T1 p. 2, drawing 3W042D498 revision 00. Drawing frame 315L; direct coupling; IP66; Class H; approximate weight 1220 kg; three PTC 150°C thermistors. Bearings: DE 6316C3, opposite DE 6314C3 (SKF/NTN/NSK). Main and thermistor terminal-box entry is on a removable cover to be drilled by the customer. Drawing dimensions in mm: length 1434; shaft diameter 65 with m6 fit; shaft extension 140; key length 110; M20 shaft-end tap, depth 40; shaft height 315 (+0/−1); foot-hole centres 508 × 508; four Ø28 holes; two M10 ground terminals. Drawing header: 400–415 V, 50 Hz, synchronous speed 3000 rpm; this is not full-load speed. The specification provides its own voltage/frequency performance. These notes apply only to this identified configuration. The brochure gives L = 1484 mm, which differs from this drawing. Ask our team to confirm the applicable outline.

MAXeV4 200 kW / 4-pole foot — installation notes from drawing

Source: AC257014T1 p. 2, drawing 3W042D508 revision 00. Drawing frame 315L; direct coupling; IP66; Class H; approximate weight 1370 kg; three PTC 150°C thermistors. Bearings: DE 6320C3, opposite DE 6316C3 (SKF/NTN/NSK). Main and thermistor terminal-box entry is on a removable cover to be drilled by the customer. Drawing dimensions in mm: length 1464; shaft diameter 80 with m6 fit; shaft extension 170; key length 140; M20 shaft-end tap, depth 40; shaft height 315 (+0/−1); foot-hole centres 508 × 508; four Ø28 holes; two M10 ground terminals. Drawing header: 400–415 V, 50 Hz, synchronous speed 1500 rpm; this is not full-load speed. The specification provides its own voltage/frequency performance. These notes apply only to this identified configuration. The brochure gives L = 1514 mm, which differs from this drawing. Ask our team to confirm the applicable outline.

MAXeV4 90 kW / 4-pole — outdoor paint appendix

Source: order P9257017T1, PDF p. 3, appendix revision 00. The appendix specifies outdoor corrosion-resistant painting of steel plate and cast iron: shot blasting to SSPC-SP10 near-white blast cleaning; 70 µm waterborne epoxy zinc-rich primer (FDEPP-1900-50); 160 µm waterborne epoxy mica-ferric oxide secondary coat (FDEPP-2000); 70 µm FD4300 waterborne polyurethane finish. Total film thickness: 300 µm. Finish: RAL 3000 (7.5R 3.5/11). The appendix differs from the indoor/Munsell description on specification p. 1. Ask our team which coating governs the configuration. This is a source-specific appendix, not the standard paint for the entire product range.

Configurations referenced: P3257440T1, P4257032T1, P4257421T1, P6257064T1, P7257030T1, P7257325T1, P7257326T1, P9257017T1, AC257010T1, AC257009T1, AC257011T1, AC257012T1, AC257014T1.

Published tolerances

Our brochure gives electromechanical tolerances with an IEC 60034-1 reference and dimensional tolerances with an IEC 60072 reference. The tables below retain their signs, formulas, units and fit classes. They describe the published brochure values; they do not replace the applicable standard or the selected motor’s approved drawing.

Tolerance for Electromechanical Characteristic

MAXeV4 brochure · page 54

Electromechanical tolerance

Quantity	Tolerance
Efficiency	-15% (1-η)
Power factor (Cosφ)	-1/6 (1-cosφ); min.0.02,max.0.07
Slip P<1kW	±30% of the slip
Slip P≥1kW	±20% of the slip
Starting torque	-15%,+25% of the torque
Starting current	+20% of the current
Pull-up torque	-15% of the torque
Break down torque	-10% of the torque; >1.5full load torque

SHAFT HEIGHT - DIMENSION H

Frame Size	Tolerance	Upper tolerance (mm)	Lower tolerance (mm)
63 to250	[blank in source]	+0	-0.5
280 to450	[blank in source]	+0	-1

SHAFT - DIMENSION D

D	Tolerance	Upper tolerance (mm)	Lower tolerance (mm)
14	j6	+0.008	-0.003
19 to28	j6	+0.009	-0.004
32 to48	k6	+0.018	+0.002
55 to80	m6	+0.030	+0.011
85 to120	m6	+0.035	+0.013
125	m6	+0.040	+0.015

FLANGE - DIMENSION N

N	Tolerance	Upper tolerance (mm)	Lower tolerance (mm)
110	h7	+0	-0.035
130 &180	h7	+0	-0.040
230 &250	h7	+0	-0.046
300	h7	+0	-0.052
350	h7	+0	-0.057
450	h7	+0	-0.063
550	h7	+0	-0.070

C FACE - DIMENSION N

N	Tolerance	Upper tolerance (mm)	Lower tolerance (mm)
60 to80	h7	+0	-0.030
95 &110	h7	+0	-0.035

These tolerances and standards are reproduced from our brochure. Confirm the applicable standard and fit for your installation.

Signed upper and lower dimensional limits are shown together. Where the shaft-height fit class is blank in the brochure, it remains unspecified here.

The efficiency symbol in the tolerance formula is η.

Find the individual configuration

The collected selection register contains 51 website rows associated with 157 individual technical PDFs. A row can contain several mounting or order-reference variants. Use the configuration identifier, frame, pole count, mounting, order reference and drawing reference together.

We have grouped operating tables only when their printed values and qualifications are identical. Each configuration remains listed separately and links to its applicable operating table and original PDF or ZIP member. A shared performance table does not mean that the motors are mechanically interchangeable. The V and OP references below are navigation labels for this guide, not TECO order codes.

Read the printed conditions carefully. Empty, unavailable and not-stated values are not zero. Some sheets retain an unresolved operating-unit qualification; those records are flagged alongside their tables. The P2257025T1 sheet, for example, prints 2875 rpm in both its 50 Hz and 60 Hz operating columns. We retain the printed values and recommend confirming the intended duty with our team.

Configuration values below are as printed. Units appear in the field labels where specified. The source conditions column is unstated (—) throughout these configuration tables. Empty, not-stated and not-specified values are not zero. Use the linked original drawing for geometry and any untranscribed callout.

Guide ID	kW	Poles	Frame	Model	Printed mounting	Order reference	Operating table
V001	0.75	2	80M1	AESV4S	IM1001:HS, Foot	P2257025T1	OP001
V002	0.75	2	80M1	AESV4S	IM1001:HS, Foot	P2257033T1	OP001
V003	0.75	2	80M1	AESV4S	IM3011:VS,Flange	P2257029T1	OP001
V004	0.75	2	80M1	AESV4S	IM2001:HS,Foot,Flange	P2257027T1	OP001
V005	0.75	4	80M2	AESV4S	IM1001:HS, Foot	P2257031T1	OP002
V006	0.75	4	80M2	AESV4S	IM1001:HS, Foot	P2257036T1	OP002
V007	0.75	4	80M2	AESV4S	IM3011:VS,Flange	P2257037T1	OP002
V008	1.1	6	90L	AESV4S	IM1001:HS, Foot	P2257444T1	OP003
V009	1.1	6	90L	AESV4S	IM1001:HS, Foot	P2257451T1	OP003
V010	1.1	2	80M2	AESV4S	IM1001:HS, Foot	P2257026T1	OP004
V011	1.1	2	80M2	AESV4S	IM1001:HS, Foot	P2257034T1	OP004
V012	1.1	2	80M2	AESV4S	IM3011:VS,Flange	P2257030T1	OP004
V013	1.1	2	80M2	AESV4S	IM3011:VS,Flange	P2257035T1	OP004
V014	1.1	2	80M2	AESV4S	IM2001:HS,Foot,Flange	P2257028T1	OP004
V015	1.1	4	90S	AESV4S	IM1001:HS, Foot	P2257440T1	OP005
V016	1.1	4	90S	AESV4S	IM1001:HS, Foot	P2257449T1	OP005
V017	1.1	4	90S	AESV4S	IM3011:VS,Flange	P2257442T1	OP005
V018	1.5	6	100L	AESV4S	IM1001 : HS, Foot,	P3257023T1	OP006
V019	1.5	6	100L	AESV4S	IM1001 : HS, Foot,	P3257030T1	OP006
V020	1.5	2	90S	AESV4S	IM1001:HS, Foot	P2257434T1	OP007
V021	1.5	2	90S	AESV4S	IM1001:HS, Foot	P2257445T1	OP007
V022	1.5	2	90S	AESV4S	IM3011:VS,Flange	P2257438T1	OP007
V023	1.5	2	90S	AESV4S	IM3011:VS,Flange	P2257447T1	OP007
V024	1.5	2	90S	AESV4S	IM2001:HS,Foot,Flange	P2257436T1	OP007
V025	1.5	4	90L	AESV4S	IM1001:HS, Foot	P2257441T1	OP008
V026	1.5	4	90L	AESV4S	IM1001:HS, Foot	P2257450T1	OP008
V027	1.5	4	90L	AESV4S	IM3011:VS,Flange	P2257443T1	OP008
V028	2.2	6	112M	AESV4S	IM1001 : HS, Foot,	P3257436T1	OP009
V029	2.2	6	112M	AESV4S	IM1001 : HS, Foot,	P3257442T1	OP009
V030	2.2	2	90L	AESV4S	IM1001:HS, Foot	P2257435T1	OP010
V031	2.2	2	90L	AESV4S	IM1001:HS, Foot	P2257446T1	OP010
V032	2.2	2	90L	AESV4S	IM3011:VS,Flange	P2257439T1	OP010
V033	2.2	2	90L	AESV4S	IM3011:VS,Flange	P2257448T1	OP010
V034	2.2	2	90L	AESV4S	IM2001:HS,Foot,Flange	P2257437T1	OP010
V035	2.2	4	100L1	AESV4S	IM2001 : HS, Foot	P3257017T1	OP011
V036	2.2	4	100L1	AESV4S	IM2001 : HS, Foot	P3257027T1	OP011
V037	2.2	4	100L1	AESU4S	IM3011: VS, Flange	P3257021T1	OP011
V038	2.2	4	100L	AESV4S	IM2001 : HS, Foot, Flange	P3257019T1	OP011
V039	3.0	4	100L2	AESV4S	IM1001 : HS, Foot	P3257018T1	OP012
V040	3.0	4	100L2	AESV4S	IM1001 : HS, Foot	P3257028T1	OP012
V041	3.0	4	100L2	AESU4S	IM3011: VS, Flange	P3257022T1	OP012
V042	3.0	4	100L2	AESU4S	IM3011: VS, Flange	P3257029T1	OP012
V043	3.0	4	100L2	AESV4S	IM2001 : HS, Foot, Flange	P3257020T1	OP012
V044	3.0	2	100L	AESV4S	IM2001 : HS, Foot	P3257025T1	OP013
V045	3.0	2	100L	AESV4S	IM2001 : HS, Foot	P3257014T1	OP013
V046	3.0	2	100L	AESU4S	IM3011:VS, Flange	P3257016T1	OP013
V047	3.0	2	100L	AESU4S	IM3011:VS, Flange	P3257026T1	OP013
V048	3.0	2	100L	AESV4S	IM2001 : HS, Foot, Flange	P3257015T1	OP013
V049	3.0	6	132S2	AESV4S	IM1001:HS,Foot	P4257035T1	OP014
V050	3.0	6	132S2	AESV4S	IM1001:HS,Foot	P4257042T1	OP014
V051	4.0	4	112M	AESV4S	IM1001 : HS, Foot,	P3257440T1	OP015
V052	4.0	4	112M	AESV4S	IM1001 : HS, Foot,	P3257433T1	OP015
V053	4.0	4	112M	AESU4S	IM3011 : VS Flange	P3257435T1	OP015
V054	4.0	4	112M	AESU4S	IM3011 : VS Flange	P3257441T1	OP015
V055	4.0	4	112M	AESV4S	IM2001 : HS, Foot, Flange	P3257434T1	OP015
V056	4.0	2	112M	AESV4S	IM1001 : HS, Foot	P3257430T1	OP016
V057	4.0	2	112M	AESV4S	IM1001 : HS, Foot	P3257438T1	OP016
V058	4.0	2	112M	AESU4S	IM3011 : VS Flange	P3257439T1	OP016
V059	4.0	2	112M	AESU4S	IM3011 : VS Flange	P3257432T1	OP016
V060	4.0	2	112M	AESV4S	IM2001 : HS, Foot, Flange	P3257431T1	OP016
V061	4.0	6	132M1	AESV4S	IM1001 : HS, Foot	P4257424T1	OP017
V062	4.0	6	132M1	AESV4S	IM1001 : HS, Foot	P4257429T1	OP017
V063	5.5	6	132M2	AESV4S	IM1001:HS,Foot	P4257425T1	OP018
V064	5.5	2	132S1	AESV4S	IM1001:HS,Foot	P4257026T1	OP019
V065	5.5	2	132S1	AESV4S	IM3011:VS,Flange	P4257038T1	OP019
V066	5.5	2	132S1	AESV4S	IM2001:HS,Foot,Flange	P4257028T1	OP019
V067	5.5	2	132S1	AESV4S	IM2001:HS,Foot,Flange	P4257036T1	OP019
V068	5.5	4	132S	AESV4S	IM1001:HS,Foot	P4257032T1	OP020
V069	5.5	4	132S	AESV4S	IM1001:HS,Foot	P4257040T1	OP020
V070	5.5	4	132S	AESV4S	IM3011:VS,Flange	P4257034T1	OP020
V071	5.5	4	132S	AESV4S	IM3011:VS,Flange	P4257041T1	OP020
V072	5.5	4	132S	AESV4S	IM2001:HS,Foot,Flange	P4257033T1	OP020
V073	7.5	4	132M	AESV4S	IM1001 : HS, Foot	P4257421T1	OP021
V074	7.5	4	132M	AESV4S	IM1001 : HS, Foot	P4257426T1	OP021
V075	7.5	4	132M	AESU4S	IM3011 : VS Flange	P4257423T1	OP021
V076	7.5	4	132M	AESU4S	IM3011 : VS Flange	P4257428T1	OP021
V077	7.5	4	132M	AESV4S	IM2001 : HS, Foot, Flange	P4257427T1	OP021
V078	7.5	2	132S2	AESV4S	IM1001 : HS, Foot	P4257027T1	OP022
V079	7.5	2	132S2	AESU4S	IM3011 : VS Flange	P4257031T1	OP022
V080	7.5	2	132S2	AESU4S	IM3011 : VS Flange	P4257039T1	OP022
V081	7.5	2	132S2	AESV4S	IM2001 : HS, Foot, Flange	P4257029T1	OP022
V082	7.5	2	132S2	AESV4S	IM2001 : HS, Foot, Flange	P4257037T1	OP022
V083	7.5	6	160M	AESV4S	IM1001 : HS, Foot	P6257070T1	OP023
V084	7.5	6	160M	AESV4S	IM1001 : HS, Foot	P6257082T1	OP023
V085	11.0	6	160L	AESV4S	IM1001 : HS, Foot	P6257071T1	OP024
V086	11.0	6	160L	AESV4S	IM1001 : HS, Foot	P6257083T1	OP024
V087	11.0	4	160M	AESV4S	IM1001 : HS, Foot	P6257064T1	OP025
V088	11.0	4	160M	AESV4S	IM1001 : HS, Foot	P6257077T1	OP025
V089	11.0	4	160M	AESU4S	IM3011 : VS, Flange	P6257081T1	OP025
V090	11.0	4	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257066T1	OP025
V091	11.0	4	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257079T1	OP025
V092	11.0	2	160M	AESV4S	IM1001 : HS, Foot	P6257055T1	OP026
V093	11.0	2	160M	AESU4S	IM3011 : VS, Flange	P6257075T1	OP026
V094	11.0	2	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257058T1	OP026
V095	11.0	2	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257072T1	OP026
V096	15.0	4	160L	AESV4S	IM1001 : HS, Foot	P6257065T1	OP027
V097	15.0	4	160L	AESV4S	IM1001 : HS, Foot	P6257078T1	OP027
V098	15.0	4	160L	AESU4S	IM3011 : VS, Flange	P6257069T1	OP027
V099	15.0	4	160L	AESV4S	IM2001 : HS, Foot, Flange	P6257067T1	OP027
V100	15.0	4	160L	AESV4S	IM2001 : HS, Foot, Flange	P6257080T1	OP027
V101	15.0	6	180L	AESV4S	IM1001 : HS, Foot	P6257538T1	OP028
V102	15.0	6	180L	AESV4S	IM1001 : HS, Foot	P6257542T1	OP028
V103	15.0	2	160M	AESV4S	IM1001 : HS, Foot	P6257056T1	OP029
V104	15.0	2	160M	AESU4S	IM3011 : VS, Flange	P6257062T1	OP029
V105	15.0	2	160M	AESU4S	IM3011 : VS, Flange	P6257076T1	OP029
V106	15.0	2	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257059T1	OP029
V107	15.0	2	160M	AESV4S	IM2001 : HS, Foot, Flange	P6257073T1	OP029
V108	18.5	2	160L	AESV4S	IM1001 : HS, Foot	P6257057T1	OP030
V109	18.5	2	160L	AESU4S	IM3011 : VS, Flange	P6257063T1	OP030
V110	18.5	2	160L	AESV4S	IM2001 : HS, Foot, Flange	P6257060T1	OP030
V111	18.5	2	160L	AESV4S	IM2001 : HS, Foot, Flange	P6257074T1	OP030
V112	18.5	4	180M	AESV4S	IM1001 : HS, Foot	P6257540T1	OP031
V113	18.5	4	180M	AESU4S	IM3011 : VS, Flange	P6257536T1	OP031
V114	18.5	4	180M	AESV4S	IM2001 : HS, Foot, Flange	P6257535T1	OP031
V115	18.5	6	200L	AESV4S	IM1001 : HS, Foot	P7257033T1	OP032
V116	22.0	2	180M	AESU4S	IM3011 : VS, Flange	P6257532T1	OP033
V117	22.0	2	180M	AESV4S	IM2001 : HS, Foot, Flange	P6257531T1	OP033
V118	22.0	2	180M	AESV4S	IM2001 : HS, Foot, Flange	P6257539T1	OP033
V119	22.0	4	180L	AESV4S	IM1001 : HS, Foot	P6257534T1	OP034
V120	22.0	4	180L	AESV4S	IM1001 : HS, Foot	P6257541T1	OP034
V121	30.0	2	200L	AESV4S	IM1001 : HS, Foot	P7257026T1	OP035
V122	30.0	2	200L	AESU4S	IM3011 : VS, Flange	P7257030T1	OP035
V123	30.0	2	200L	AESV4S	IM2001 : HS, Foot, Flange	P7257028T1	OP035
V124	30.0	2	200L	AESV4S	IM2001 : HS, Foot, Flange	P7257034T1	OP035
V125	30.0	4	200L	AESV4S	IM1001 : HS, Foot	P7257031T1	OP036
V126	30.0	4	200L	AESV4S	IM1001 : HS, Foot	P7257036T1	OP036
V127	30.0	4	200L	AESU4S	IM3011 : VS, Flange	P7257032T1	OP036
V128	37.0	2	200L	AESV4S	IM1001 : HS, Foot	P7257027T1	OP037
V129	37.0	2	200L	AESV4S	IM2001 : HS, Foot, Flange	P7257029T1	OP037
V130	37.0	2	200L	AESV4S	IM2001 : HS, Foot, Flange	P7257035T1	OP037
V131	37.0	4	225S	AESV4S	IM1001 : HS, Foot	P7257323T1	OP038
V132	37.0	4	225S	AESV4S	IM1001 : HS, Foot	P7257328T1	OP038
V133	37.0	4	225S	AESU4S	IM3011 : VS, Flange	P7257325T1	OP038
V134	45.0	2	225M	AESV4S	IM1001 : HS, Foot	P7257321T1	OP039
V135	45.0	2	225M	AESV4S	IM2001 : HS, Foot, Flange	P7257322T1	OP039
V136	45.0	2	225M	AESV4S	IM2001 : HS, Foot, Flange	P7257327T1	OP039
V137	45.0	4	225M	AESV4S	IM1001 : HS, Foot	P7257324T1	OP040
V138	45.0	4	225M	AESV4S	IM1001 : HS, Foot	P7257329T1	OP040
V139	45.0	4	225M	AESU4S	IM3011 : VS, Flange	P7257326T1	OP040
V140	55.0	2	250M	AESV4S	IM1001 : HS, Foot	P7257720T1	OP041
V141	55.0	2	250M	AESV4S	IM2001 : HS, Foot, Flange	P7257721T1	OP041
V142	55.0	2	250M	AESV4S	IM2001 : HS, Foot, Flange	P7257724T1	OP041
V143	55.0	4	250M	AESV4S	IM1001 : HS, Foot	P7257722T1	OP042
V144	55.0	4	250M	AESV4S	IM1001 : HS, Foot	P7257725T1	OP042
V145	55.0	4	250M	AESU4S	IM3011 : VS, Flange	P7257723T1	OP042
V146	55.0	4	250M	AESV4S	IM2001 : HS, Foot, Flange	P7257726T1	OP042
V147	75.0	2	280S	AESV4S	IM1001 : HS, Foot	P9257014T1	OP043
V148	75.0	2	280S	AESV4S	IM2001 : HS, Foot, Flange	P9257023T1	OP043
V149	75.0	4	280S	AESV4S	IM1001 : HS, Foot	P9257016T1	OP044
V150	75.0	4	280S	AESV4S	IM1001 : HS, Foot	P9257024T1	OP044
V151	90.0	2	280M	AESV4S	IM1001 : HS, Foot	P9257015T1	OP045
V152	90.0	4	280M	AESV4S	IM1001 : HS, Foot	P9257017T1	OP046
V153	110.0	4	315S	AESV4S	IM1001 : HS, Foot (B3)	AC257010T1	OP047
V154	132.0	2	315M	AESV4S	IM1001 : HS, Foot (B3)	AC257009T1	OP048
V155	132.0	4	315M	AESV4S	IM1001 : HS, Foot (B3)	AC257011T1	OP049
V156	200.0	2	315L	AESV4S	IM1001 : HS, Foot (B3)	AC257012T1	OP050
V157	200.0	4	315L	AESV4S	IM1001 : HS, Foot (B3)	AC257014T1	OP051

V001 · 0.75 kW · 2 pole · 80M1 · IM1001:HS, Foot

Order P2257025T1 · Operating table OP001 · Download source PDF / archive

0.75D2,400-415,440-460V,3Ph,50,60Hz,D80M1,P2257025T1.pdf · SRC-12612b034f4670d7 · Website table/row/ID: 62 / 1 / 1 — listed Frame: 80M1

Specification	Value
Rated output (kW)	0.75
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	80M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0011
Sheet weight	Not stated
Revision	00
Order reference	P2257025T1
Specification number	32057A001-00004
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-001

Printed rated torque: Not available; source blank not established

V002 · 0.75 kW · 2 pole · 80M1 · IM1001:HS, Foot

Order P2257033T1 · Operating table OP001 · Download source PDF / archive

0.75D2,400-415,440-460V,3Ph,50,60Hz,D80M1,P2257033T1.pdf · SRC-c34d58c61be8500d · Website table/row/ID: 62 / 1 / 1 — listed Frame: 80M1

Specification	Value
Rated output (kW)	0.75
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	80M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0011
Sheet weight	Not stated
Revision	00
Order reference	P2257033T1
Specification number	32057A001-00004
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-001

Printed rated torque: Not available; source blank not established

V003 · 0.75 kW · 2 pole · 80M1 · IM3011:VS,Flange

Order P2257029T1 · Operating table OP001 · Download source PDF / archive

0.75DD2,400-415,440-460V,3Ph,50,60Hz,D80M1,P2257029T1.pdf · SRC-abd1a9e5997264bb · Website table/row/ID: 62 / 1 / 1 — listed Frame: 80M1

Specification	Value
Rated output (kW)	0.75
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	80M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0044
Sheet weight	Not stated
Revision	00
Order reference	P2257029T1
Specification number	32057A001-00001
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-035

Printed rated torque: Not available; source blank not established

V004 · 0.75 kW · 2 pole · 80M1 · IM2001:HS,Foot,Flange

Order P2257027T1 · Operating table OP001 · Download source PDF / archive

0.75DF2,400-415,440-460V,3Ph,50,60Hz,D80M1,P2257027T1.pdf · SRC-21f76f3039288a32 · Website table/row/ID: 62 / 1 / 1 — listed Frame: 80M1

Specification	Value
Rated output (kW)	0.75
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	80M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0011
Sheet weight	Not stated
Revision	00
Order reference	P2257027T1
Specification number	32057A001-00005
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-019

Printed rated torque: Not available; source blank not established

V005 · 0.75 kW · 4 pole · 80M2 · IM1001:HS, Foot

Order P2257031T1 · Operating table OP002 · Download source PDF / archive

0.75D4,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257031T1.pdf · SRC-a8b774cea6d9f5bc · Website table/row/ID: 62 / 2 / 2 — listed Frame: 80M2

Specification	Value
Rated output (kW)	0.75
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.002
Sheet weight	Not stated
Revision	00
Order reference	P2257031T1
Specification number	32057A001-00008
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-048

Printed rated torque: Not available; source blank not established

V006 · 0.75 kW · 4 pole · 80M2 · IM1001:HS, Foot

Order P2257036T1 · Operating table OP002 · Download source PDF / archive

0.75D4,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257036T1.pdf · SRC-bdcd67019477a6ff · Website table/row/ID: 62 / 2 / 2 — listed Frame: 80M2

Specification	Value
Rated output (kW)	0.75
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.002
Sheet weight	Not stated
Revision	00
Order reference	P2257036T1
Specification number	32057A001-00008
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-048

Printed rated torque: Not available; source blank not established

V007 · 0.75 kW · 4 pole · 80M2 · IM3011:VS,Flange

Order P2257037T1 · Operating table OP002 · Download source PDF / archive

0.75DD4,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257037T1.pdf · SRC-0ff0b2224cb16848 · Website table/row/ID: 62 / 2 / 2 — listed Frame: 80M2

Specification	Value
Rated output (kW)	0.75
Pole count	4
Printed mounting	IM3011:VS,Flange
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.002
Sheet weight	Not stated
Revision	00
Order reference	P2257037T1
Specification number	32057A001-00003
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-074

Printed rated torque: Not available; source blank not established

V008 · 1.1 kW · 6 pole · 90L · IM1001:HS, Foot

Order P2257444T1 · Operating table OP003 · Download source PDF / archive

1.1D6,400-415,440-460V,3Ph,50,60Hz,D90L,P2257444T1.pdf · SRC-945f7ce42cc66f50 · Website table/row/ID: 62 / 3 / 3 — listed Frame: 90L

Specification	Value
Rated output (kW)	1.1
Pole count	6
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P2257444T1
Specification number	32057A001-00019
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-090

Printed rated torque: Not available; source blank not established

V009 · 1.1 kW · 6 pole · 90L · IM1001:HS, Foot

Order P2257451T1 · Operating table OP003 · Download source PDF / archive

1.1D6,400-415,440-460V,3Ph,50,60Hz,D90L,P2257451T1.pdf · SRC-8bc485c3f4d10e27 · Website table/row/ID: 62 / 3 / 3 — listed Frame: 90L

Specification	Value
Rated output (kW)	1.1
Pole count	6
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P2257451T1
Specification number	32057A001-00019
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-090

Printed rated torque: Not available; source blank not established

V010 · 1.1 kW · 2 pole · 80M2 · IM1001:HS, Foot

Order P2257026T1 · Operating table OP004 · Download source PDF / archive

1.1D2,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257026T1.pdf · SRC-7f5dac31616257f1 · Website table/row/ID: 62 / 4 / 4 — listed Frame: 80M2

Specification	Value
Rated output (kW)	1.1
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0043
Sheet weight	Not stated
Revision	00
Order reference	P2257026T1
Specification number	32057A001-00006
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-002

Printed rated torque: Not available; source blank not established

V011 · 1.1 kW · 2 pole · 80M2 · IM1001:HS, Foot

Order P2257034T1 · Operating table OP004 · Download source PDF / archive

1.1D2,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257034T1.pdf · SRC-f6ec4245bd4fde1a · Website table/row/ID: 62 / 4 / 4 — listed Frame: 80M2

Specification	Value
Rated output (kW)	1.1
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0043
Sheet weight	Not stated
Revision	00
Order reference	P2257034T1
Specification number	32057A001-00006
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-002

Printed rated torque: Not available; source blank not established

V012 · 1.1 kW · 2 pole · 80M2 · IM3011:VS,Flange

Order P2257030T1 · Operating table OP004 · Download source PDF / archive

1.1DD2,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257030T1.pdf · SRC-0aad22206fb6dba1 · Website table/row/ID: 62 / 4 / 4 — listed Frame: 80M2

Specification	Value
Rated output (kW)	1.1
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0043
Sheet weight	Not stated
Revision	00
Order reference	P2257030T1
Specification number	32057A001-00002
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-036

Printed rated torque: Not available; source blank not established

V013 · 1.1 kW · 2 pole · 80M2 · IM3011:VS,Flange

Order P2257035T1 · Operating table OP004 · Download source PDF / archive

1.1DD2,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257035T1.pdf · SRC-b112a6fa882e764c · Website table/row/ID: 62 / 4 / 4 — listed Frame: 80M2

Specification	Value
Rated output (kW)	1.1
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0043
Sheet weight	Not stated
Revision	00
Order reference	P2257035T1
Specification number	32057A001-00002
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-036

Printed rated torque: Not available; source blank not established

V014 · 1.1 kW · 2 pole · 80M2 · IM2001:HS,Foot,Flange

Order P2257028T1 · Operating table OP004 · Download source PDF / archive

1.1DF2,400-415,440-460V,3Ph,50,60Hz,D80M2,P2257028T1.pdf · SRC-ffa61935dad3cbc5 · Website table/row/ID: 62 / 4 / 4 — listed Frame: 80M2

Specification	Value
Rated output (kW)	1.1
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	80M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0043
Sheet weight	Not stated
Revision	00
Order reference	P2257028T1
Specification number	32057A001-00007
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-020

Printed rated torque: Not available; source blank not established

V015 · 1.1 kW · 4 pole · 90S · IM1001:HS, Foot

Order P2257440T1 · Operating table OP005 · Download source PDF / archive

1.1D4,400-415,440-460V,3Ph,50,60Hz,D90S,P2257440T1.pdf · SRC-df6a93fd1a0a5227 · Website table/row/ID: 62 / 5 / 5 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.1
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0035
Sheet weight	Not stated
Revision	00
Order reference	P2257440T1
Specification number	32057A001-00013
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-049

Printed rated torque: Not available; source blank not established

V016 · 1.1 kW · 4 pole · 90S · IM1001:HS, Foot

Order P2257449T1 · Operating table OP005 · Download source PDF / archive

1.1D4,400-415,440-460V,3Ph,50,60Hz,D90S,P2257449T1.pdf · SRC-2a58d5c2274b87e2 · Website table/row/ID: 62 / 5 / 5 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.1
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0035
Sheet weight	Not stated
Revision	00
Order reference	P2257449T1
Specification number	32057A001-00013
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-049

Printed rated torque: Not available; source blank not established

V017 · 1.1 kW · 4 pole · 90S · IM3011:VS,Flange

Order P2257442T1 · Operating table OP005 · Download source PDF / archive

1.1DD4,400-415,440-460V,3Ph,50,60Hz,D90S,P2257442T1.pdf · SRC-4b9ea780c0ede458 · Website table/row/ID: 62 / 5 / 5 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.1
Pole count	4
Printed mounting	IM3011:VS,Flange
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0035
Sheet weight	Not stated
Revision	00
Order reference	P2257442T1
Specification number	32057A001-00010
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-075

Printed rated torque: Not available; source blank not established

V018 · 1.5 kW · 6 pole · 100L · IM1001 : HS, Foot,

Order P3257023T1 · Operating table OP006 · Download source PDF / archive

1.5D6,400-415,440-460V,3Ph,50,60Hz,D100L,P3257023T1.pdf · SRC-c5fff625d2704acc · Website table/row/ID: 62 / 6 / 6 — listed Frame: 100L

Specification	Value
Rated output (kW)	1.5
Pole count	6
Printed mounting	IM1001 : HS, Foot,
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0117
Sheet weight	Not stated
Revision	00
Order reference	P3257023T1
Specification number	32057A001-00029
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-091

Printed rated torque: Not available; source blank not established

V019 · 1.5 kW · 6 pole · 100L · IM1001 : HS, Foot,

Order P3257030T1 · Operating table OP006 · Download source PDF / archive

1.5D6,400-415,440-460V,3Ph,50,60Hz,D100L,P3257030T1.pdf · SRC-947492faf2e378e4 · Website table/row/ID: 62 / 6 / 6 — listed Frame: 100L

Specification	Value
Rated output (kW)	1.5
Pole count	6
Printed mounting	IM1001 : HS, Foot,
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0117
Sheet weight	Not stated
Revision	00
Order reference	P3257030T1
Specification number	32057A001-00029
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-091

Printed rated torque: Not available; source blank not established

V020 · 1.5 kW · 2 pole · 90S · IM1001:HS, Foot

Order P2257434T1 · Operating table OP007 · Download source PDF / archive

1.5D2,400-415,440-460V,3Ph,50,60Hz,D90S,P2257434T1.pdf · SRC-2ce56b81face8434 · Website table/row/ID: 62 / 7 / 7 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.5
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0018
Sheet weight	Not stated
Revision	00
Order reference	P2257434T1
Specification number	32057A001-00011
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-003

Printed rated torque: Not available; source blank not established

V021 · 1.5 kW · 2 pole · 90S · IM1001:HS, Foot

Order P2257445T1 · Operating table OP007 · Download source PDF / archive

1.5D2,400-415,440-460V,3Ph,50,60Hz,D90S,P2257445T1.pdf · SRC-d5861cc4320661b5 · Website table/row/ID: 62 / 7 / 7 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.5
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0018
Sheet weight	Not stated
Revision	00
Order reference	P2257445T1
Specification number	32057A001-00011
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-003

Printed rated torque: Not available; source blank not established

V022 · 1.5 kW · 2 pole · 90S · IM3011:VS,Flange

Order P2257438T1 · Operating table OP007 · Download source PDF / archive

1.5DD2,400-415,440-460V,3Ph,50,60Hz,D90S,P2257438T1.pdf · SRC-c6a1181ebc8b8dfa · Website table/row/ID: 62 / 7 / 7 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.5
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0018
Sheet weight	Not stated
Revision	00
Order reference	P2257438T1
Specification number	32057A001-00009
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-037

Printed rated torque: Not available; source blank not established

V023 · 1.5 kW · 2 pole · 90S · IM3011:VS,Flange

Order P2257447T1 · Operating table OP007 · Download source PDF / archive

1.5DD2,400-415,440-460V,3Ph,50,60Hz,D90S,P2257447T1.pdf · SRC-18c74cf50207877e · Website table/row/ID: 62 / 7 / 7 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.5
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0018
Sheet weight	Not stated
Revision	00
Order reference	P2257447T1
Specification number	32057A001-00009
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-037

Printed rated torque: Not available; source blank not established

V024 · 1.5 kW · 2 pole · 90S · IM2001:HS,Foot,Flange

Order P2257436T1 · Operating table OP007 · Download source PDF / archive

1.5DF2,400-415,440-460V,3Ph,50,60Hz,D90S,P2257436T1.pdf · SRC-07b791e5d735fe54 · Website table/row/ID: 62 / 7 / 7 — listed Frame: 90S

Specification	Value
Rated output (kW)	1.5
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	90S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0018
Sheet weight	Not stated
Revision	00
Order reference	P2257436T1
Specification number	32057A001-00012
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-021

Printed rated torque: Not available; source blank not established

V025 · 1.5 kW · 4 pole · 90L · IM1001:HS, Foot

Order P2257441T1 · Operating table OP008 · Download source PDF / archive

1.5D4,400-415,440-460V,3Ph,50,60Hz,D90L,P2257441T1.pdf · SRC-8d1cb8e682bdd498 · Website table/row/ID: 62 / 8 / 8 — listed Frame: 90L

Specification	Value
Rated output (kW)	1.5
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0042
Sheet weight	Not stated
Revision	00
Order reference	P2257441T1
Specification number	32057A001-00018
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-050

Printed rated torque: Not available; source blank not established

V026 · 1.5 kW · 4 pole · 90L · IM1001:HS, Foot

Order P2257450T1 · Operating table OP008 · Download source PDF / archive

1.5D4,400-415,440-460V,3Ph,50,60Hz,D90L,P2257450T1.pdf · SRC-29b66579400d1fa6 · Website table/row/ID: 62 / 8 / 8 — listed Frame: 90L

Specification	Value
Rated output (kW)	1.5
Pole count	4
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0042
Sheet weight	Not stated
Revision	00
Order reference	P2257450T1
Specification number	32057A001-00018
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-050

Printed rated torque: Not available; source blank not established

V027 · 1.5 kW · 4 pole · 90L · IM3011:VS,Flange

Order P2257443T1 · Operating table OP008 · Download source PDF / archive

1.5DD4,400-415,440-460V,3Ph,50,60Hz,D90L,P2257443T1.pdf · SRC-f37519be1c1613e2 · Website table/row/ID: 62 / 8 / 8 — listed Frame: 90L

Specification	Value
Rated output (kW)	1.5
Pole count	4
Printed mounting	IM3011:VS,Flange
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0042
Sheet weight	Not stated
Revision	00
Order reference	P2257443T1
Specification number	32057A001-00015
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-076

Printed rated torque: Not available; source blank not established

V028 · 2.2 kW · 6 pole · 112M · IM1001 : HS, Foot,

Order P3257436T1 · Operating table OP009 · Download source PDF / archive

2.2D6,400-415,440-460V,3Ph,50,60Hz,D112M,P3257436T1.pdf · SRC-ea1c960694ca6f78 · Website table/row/ID: 62 / 9 / 9 — listed Frame: 112M

Specification	Value
Rated output (kW)	2.2
Pole count	6
Printed mounting	IM1001 : HS, Foot,
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0199
Sheet weight	Not stated
Revision	00
Order reference	P3257436T1
Specification number	32057A001-00036
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-092

Printed rated torque: Not available; source blank not established

V029 · 2.2 kW · 6 pole · 112M · IM1001 : HS, Foot,

Order P3257442T1 · Operating table OP009 · Download source PDF / archive

2.2D6,400-415,440-460V,3Ph,50,60Hz,D112M,P3257442T1.pdf · SRC-96eb7c004578ad6d · Website table/row/ID: 62 / 9 / 9 — listed Frame: 112M

Specification	Value
Rated output (kW)	2.2
Pole count	6
Printed mounting	IM1001 : HS, Foot,
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0199
Sheet weight	Not stated
Revision	00
Order reference	P3257442T1
Specification number	32057A001-00036
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-092

Printed rated torque: Not available; source blank not established

V030 · 2.2 kW · 2 pole · 90L · IM1001:HS, Foot

Order P2257435T1 · Operating table OP010 · Download source PDF / archive

2.2D2,400-415,440-460V,3Ph,50,60Hz,D90L,P2257435T1.pdf · SRC-0731154c11f300ea · Website table/row/ID: 62 / 10 / 10 — listed Frame: 90L

Specification	Value
Rated output (kW)	2.2
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0024
Sheet weight	Not stated
Revision	00
Order reference	P2257435T1
Specification number	32057A001-00016
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-004

Printed rated torque: Not available; source blank not established

V031 · 2.2 kW · 2 pole · 90L · IM1001:HS, Foot

Order P2257446T1 · Operating table OP010 · Download source PDF / archive

2.2D2,400-415,440-460V,3Ph,50,60Hz,D90L,P2257446T1.pdf · SRC-eed0bc77818e45d0 · Website table/row/ID: 62 / 10 / 10 — listed Frame: 90L

Specification	Value
Rated output (kW)	2.2
Pole count	2
Printed mounting	IM1001:HS, Foot
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0024
Sheet weight	Not stated
Revision	00
Order reference	P2257446T1
Specification number	32057A001-00016
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-004

Printed rated torque: Not available; source blank not established

V032 · 2.2 kW · 2 pole · 90L · IM3011:VS,Flange

Order P2257439T1 · Operating table OP010 · Download source PDF / archive

2.2DD2,400-415,440-460V,3Ph,50,60Hz,D90L,P2257439T1.pdf · SRC-b1e3f5464b3089fa · Website table/row/ID: 62 / 10 / 10 — listed Frame: 90L

Specification	Value
Rated output (kW)	2.2
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0024
Sheet weight	Not stated
Revision	00
Order reference	P2257439T1
Specification number	32057A001-00014
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-038

Printed rated torque: Not available; source blank not established

V033 · 2.2 kW · 2 pole · 90L · IM3011:VS,Flange

Order P2257448T1 · Operating table OP010 · Download source PDF / archive

2.2DD2,400-415,440-460V,3Ph,50,60Hz,D90L,P2257448T1.pdf · SRC-492dbea29e3b274c · Website table/row/ID: 62 / 10 / 10 — listed Frame: 90L

Specification	Value
Rated output (kW)	2.2
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0024
Sheet weight	Not stated
Revision	00
Order reference	P2257448T1
Specification number	32057A001-00014
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-038

Printed rated torque: Not available; source blank not established

V034 · 2.2 kW · 2 pole · 90L · IM2001:HS,Foot,Flange

Order P2257437T1 · Operating table OP010 · Download source PDF / archive

2.2DF2,400-415,440-460V,3Ph,50,60Hz,D90L,P2257437T1.pdf · SRC-19563a578ca36e13 · Website table/row/ID: 62 / 10 / 10 — listed Frame: 90L

Specification	Value
Rated output (kW)	2.2
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	90L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0024
Sheet weight	Not stated
Revision	00
Order reference	P2257437T1
Specification number	32057A001-00017
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-022

Printed rated torque: Not available; source blank not established

V035 · 2.2 kW · 4 pole · 100L1 · IM2001 : HS, Foot

Order P3257017T1 · Operating table OP011 · Download source PDF / archive

2.2D4,400-415,440-460V,3Ph,50,60Hz,D100L,P3257017T1.pdf · SRC-14cef26fad359172 · Website table/row/ID: 62 / 11 / 11 — listed Frame: 100L

Specification	Value
Rated output (kW)	2.2
Pole count	4
Printed mounting	IM2001 : HS, Foot
Frame	100L1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0089
Sheet weight	Not stated
Revision	00
Order reference	P3257017T1
Specification number	32057A001-00025
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-051

Printed rated torque: Not available; source blank not established

V036 · 2.2 kW · 4 pole · 100L1 · IM2001 : HS, Foot

Order P3257027T1 · Operating table OP011 · Download source PDF / archive

2.2D4,400-415,440-460V,3Ph,50,60Hz,D100L1,P3257027T1.pdf · SRC-a2ee6efe151a8754 · Website table/row/ID: 62 / 11 / 11 — listed Frame: 100L

Specification	Value
Rated output (kW)	2.2
Pole count	4
Printed mounting	IM2001 : HS, Foot
Frame	100L1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0089
Sheet weight	Not stated
Revision	00
Order reference	P3257027T1
Specification number	32057A001-00025
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-051

Printed rated torque: Not available; source blank not established

V037 · 2.2 kW · 4 pole · 100L1 · IM3011: VS, Flange

Order P3257021T1 · Operating table OP011 · Download source PDF / archive

2.2DD4,400-415,440-460V,3Ph,50,60Hz,D100L1,P3257021T1.pdf · SRC-a5e7cc5f2b95643c · Website table/row/ID: 62 / 11 / 11 — listed Frame: 100L

Specification	Value
Rated output (kW)	2.2
Pole count	4
Printed mounting	IM3011: VS, Flange
Frame	100L1
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0089
Sheet weight	Not stated
Revision	00
Order reference	P3257021T1
Specification number	32057A001-00021
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-077

Printed rated torque: Not available; source blank not established

V038 · 2.2 kW · 4 pole · 100L · IM2001 : HS, Foot, Flange

Order P3257019T1 · Operating table OP011 · Download source PDF / archive

2.2DF4,400-415,440-460V,3Ph,50,60Hz,D100L1,P3257019T1.pdf · SRC-333f669547915473 · Website table/row/ID: 62 / 11 / 11 — listed Frame: 100L

Specification	Value
Rated output (kW)	2.2
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0089
Sheet weight	Not stated
Revision	00
Order reference	P3257019T1
Specification number	32057A001-00026
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-066

Printed rated torque: Not available; source blank not established

V039 · 3.0 kW · 4 pole · 100L2 · IM1001 : HS, Foot

Order P3257018T1 · Operating table OP012 · Download source PDF / archive

3D4,400-415,440-460V,3Ph,50,60Hz,D100L2,P3257018T1.pdf · SRC-02a1d8c8e3e50276 · Website table/row/ID: 62 / 12 / 12 — listed Frame: 100L2

Specification	Value
Rated output (kW)	3.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	100L2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0116
Sheet weight	Not stated
Revision	00
Order reference	P3257018T1
Specification number	32057A001-00027
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-052

Printed rated torque: Not available; source blank not established

V040 · 3.0 kW · 4 pole · 100L2 · IM1001 : HS, Foot

Order P3257028T1 · Operating table OP012 · Download source PDF / archive

3D4,400-415,440-460V,3Ph,50,60Hz,D100L2,P3257028T1.pdf · SRC-a69cefd6c5ea6212 · Website table/row/ID: 62 / 12 / 12 — listed Frame: 100L2

Specification	Value
Rated output (kW)	3.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	100L2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0116
Sheet weight	Not stated
Revision	00
Order reference	P3257028T1
Specification number	32057A001-00027
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-052

Printed rated torque: Not available; source blank not established

V041 · 3.0 kW · 4 pole · 100L2 · IM3011: VS, Flange

Order P3257022T1 · Operating table OP012 · Download source PDF / archive

3DD4,400-415,440-460V,3Ph,50,60Hz,D100L2,P3257022T1.pdf · SRC-127eeb2969877fec · Website table/row/ID: 62 / 12 / 12 — listed Frame: 100L2

Specification	Value
Rated output (kW)	3.0
Pole count	4
Printed mounting	IM3011: VS, Flange
Frame	100L2
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0116
Sheet weight	Not stated
Revision	00
Order reference	P3257022T1
Specification number	32057A001-00022
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-078

Printed rated torque: Not available; source blank not established

V042 · 3.0 kW · 4 pole · 100L2 · IM3011: VS, Flange

Order P3257029T1 · Operating table OP012 · Download source PDF / archive

3DD4,400-415,440-460V,3Ph,50,60Hz,D100L2,P3257029T1.pdf · SRC-f456c99b32011d27 · Website table/row/ID: 62 / 12 / 12 — listed Frame: 100L2

Specification	Value
Rated output (kW)	3.0
Pole count	4
Printed mounting	IM3011: VS, Flange
Frame	100L2
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0116
Sheet weight	Not stated
Revision	00
Order reference	P3257029T1
Specification number	32057A001-00022
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-078

Printed rated torque: Not available; source blank not established

V043 · 3.0 kW · 4 pole · 100L2 · IM2001 : HS, Foot, Flange

Order P3257020T1 · Operating table OP012 · Download source PDF / archive

3DF4,400-415,440-460V,3Ph,50,60Hz,D100L2,P3257020T1.pdf · SRC-9b6fcfa1095d2efd · Website table/row/ID: 62 / 12 / 12 — listed Frame: 100L2

Specification	Value
Rated output (kW)	3.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	100L2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0116
Sheet weight	Not stated
Revision	00
Order reference	P3257020T1
Specification number	32057A001-00028
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-067

Printed rated torque: Not available; source blank not established

V044 · 3.0 kW · 2 pole · 100L · IM2001 : HS, Foot

Order P3257025T1 · Operating table OP013 · Download source PDF / archive

3D2,400-415,440-460V,3Ph,50,60Hz,D100L,P3257025T1.pdf · SRC-294ed60ddd339c26 · Website table/row/ID: 62 / 13 / 13 — listed Frame: 100L

Specification	Value
Rated output (kW)	3.0
Pole count	2
Printed mounting	IM2001 : HS, Foot
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0039
Sheet weight	Not stated
Revision	00
Order reference	P3257025T1
Specification number	32057A001-00023
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-005

Printed rated torque: Not available; source blank not established

V045 · 3.0 kW · 2 pole · 100L · IM2001 : HS, Foot

Order P3257014T1 · Operating table OP013 · Download source PDF / archive

3D2,400-415,440-460V,3Ph,50,60Hz.D100L,P3257014T1.pdf · SRC-ea5a66e7a800db5d · Website table/row/ID: 62 / 13 / 13 — listed Frame: 100L

Specification	Value
Rated output (kW)	3.0
Pole count	2
Printed mounting	IM2001 : HS, Foot
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0039
Sheet weight	Not stated
Revision	00
Order reference	P3257014T1
Specification number	32057A001-00023
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-005

Printed rated torque: Not available; source blank not established

V046 · 3.0 kW · 2 pole · 100L · IM3011:VS, Flange

Order P3257016T1 · Operating table OP013 · Download source PDF / archive

3DD2,400-415,440-460V,3Ph,50,60Hz,D100L,P3257016T1.pdf · SRC-900fc57188692994 · Website table/row/ID: 62 / 13 / 13 — listed Frame: 100L

Specification	Value
Rated output (kW)	3.0
Pole count	2
Printed mounting	IM3011:VS, Flange
Frame	100L
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0039
Sheet weight	Not stated
Revision	00
Order reference	P3257016T1
Specification number	32057A001-00020
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-039

Printed rated torque: Not available; source blank not established

V047 · 3.0 kW · 2 pole · 100L · IM3011:VS, Flange

Order P3257026T1 · Operating table OP013 · Download source PDF / archive

3DD2,400-415,440-460V,3Ph,50,60Hz,D100L,P3257026T1.pdf · SRC-4915b4bbdf00c6b4 · Website table/row/ID: 62 / 13 / 13 — listed Frame: 100L

Specification	Value
Rated output (kW)	3.0
Pole count	2
Printed mounting	IM3011:VS, Flange
Frame	100L
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0039
Sheet weight	Not stated
Revision	00
Order reference	P3257026T1
Specification number	32057A001-00020
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-039

Printed rated torque: Not available; source blank not established

V048 · 3.0 kW · 2 pole · 100L · IM2001 : HS, Foot, Flange

Order P3257015T1 · Operating table OP013 · Download source PDF / archive

3DF2,400-415,440-460V,3Ph,50,60Hz,D100L,P3257015T1.pdf · SRC-eb361469e462e7ed · Website table/row/ID: 62 / 13 / 13 — listed Frame: 100L

Specification	Value
Rated output (kW)	3.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	100L
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0039
Sheet weight	Not stated
Revision	00
Order reference	P3257015T1
Specification number	32057A001-00024
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-023

Printed rated torque: Not available; source blank not established

V049 · 3.0 kW · 6 pole · 132S2 · IM1001:HS,Foot

Order P4257035T1 · Operating table OP014 · Download source PDF / archive

3D6,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257035T1.pdf · SRC-daa4dfd052bd2ea5 · Website table/row/ID: 62 / 14 / 14 — listed Frame: 132S2

Specification	Value
Rated output (kW)	3.0
Pole count	6
Printed mounting	IM1001:HS,Foot
Frame	132S2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0314
Sheet weight	Not stated
Revision	00
Order reference	P4257035T1
Specification number	32057A001-00046
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-093

Printed rated torque: Not available; source blank not established

V050 · 3.0 kW · 6 pole · 132S2 · IM1001:HS,Foot

Order P4257042T1 · Operating table OP014 · Download source PDF / archive

3D6,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257042T1.pdf · SRC-cfa02f3e59eb08f7 · Website table/row/ID: 62 / 14 / 14 — listed Frame: 132S2

Specification	Value
Rated output (kW)	3.0
Pole count	6
Printed mounting	IM1001:HS,Foot
Frame	132S2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0314
Sheet weight	Not stated
Revision	00
Order reference	P4257042T1
Specification number	32057A001-00046
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-093

Printed rated torque: Not available; source blank not established

V051 · 4.0 kW · 4 pole · 112M · IM1001 : HS, Foot,

Order P3257440T1 · Operating table OP015 · Download source PDF / archive

4D4,400-415,440-460V,3Ph,50,60Hz,D112M,P3257440T1.pdf · SRC-a912f32ba2988a51 · Website table/row/ID: 62 / 15 / 15 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	4
Printed mounting	IM1001 : HS, Foot,
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0164
Sheet weight	Not stated
Revision	00
Order reference	P3257440T1
Specification number	32057A001-00034
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-053

Printed rated torque: Not available; source blank not established

V052 · 4.0 kW · 4 pole · 112M · IM1001 : HS, Foot,

Order P3257433T1 · Operating table OP015 · Download source PDF / archive

4D4,400-415,440-460V,3Ph,50,60Hz.D112M,P3257433T1.pdf · SRC-9f4ca129eefaebb9 · Website table/row/ID: 62 / 15 / 15 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	4
Printed mounting	IM1001 : HS, Foot,
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0164
Sheet weight	Not stated
Revision	00
Order reference	P3257433T1
Specification number	32057A001-00034
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-053

Printed rated torque: Not available; source blank not established

V053 · 4.0 kW · 4 pole · 112M · IM3011 : VS Flange

Order P3257435T1 · Operating table OP015 · Download source PDF / archive

4DD4,400-415,440-460V,3Ph,50,60Hz,D112M,P3257435T1.pdf · SRC-e78d5082c98bf794 · Website table/row/ID: 62 / 15 / 15 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	4
Printed mounting	IM3011 : VS Flange
Frame	112M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0164
Sheet weight	Not stated
Revision	00
Order reference	P3257435T1
Specification number	32057A001-00031
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-079

Printed rated torque: Not available; source blank not established

V054 · 4.0 kW · 4 pole · 112M · IM3011 : VS Flange

Order P3257441T1 · Operating table OP015 · Download source PDF / archive

4DD4,400-415,440-460V,3Ph,50,60Hz,D112M,P3257441T1.pdf · SRC-0a62596628dcbef8 · Website table/row/ID: 62 / 15 / 15 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	4
Printed mounting	IM3011 : VS Flange
Frame	112M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0164
Sheet weight	Not stated
Revision	00
Order reference	P3257441T1
Specification number	32057A001-00031
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-079

Printed rated torque: Not available; source blank not established

V055 · 4.0 kW · 4 pole · 112M · IM2001 : HS, Foot, Flange

Order P3257434T1 · Operating table OP015 · Download source PDF / archive

4DF4,400-415,440-460V,3Ph,50,60Hz,D112M,P3257434T1.pdf · SRC-5472d198c57e6d05 · Website table/row/ID: 62 / 15 / 15 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0164
Sheet weight	Not stated
Revision	00
Order reference	P3257434T1
Specification number	32057A001-00035
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-068

Printed rated torque: Not available; source blank not established

V056 · 4.0 kW · 2 pole · 112M · IM1001 : HS, Foot

Order P3257430T1 · Operating table OP016 · Download source PDF / archive

4D2,400-415,440-460V,3Ph,50,60Hz,D112M,P3257430T1.pdf · SRC-61c365ed64af759b · Website table/row/ID: 62 / 16 / 16 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P3257430T1
Specification number	32057A001-00032
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-006

Printed rated torque: Not available; source blank not established

V057 · 4.0 kW · 2 pole · 112M · IM1001 : HS, Foot

Order P3257438T1 · Operating table OP016 · Download source PDF / archive

4D2,400-415,440-460V,3Ph,50,60Hz,D112M,P3257438T1.pdf · SRC-0e5217cf8bcd17d8 · Website table/row/ID: 62 / 16 / 16 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P3257438T1
Specification number	32057A001-00032
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-006

Printed rated torque: Not available; source blank not established

V058 · 4.0 kW · 2 pole · 112M · IM3011 : VS Flange

Order P3257439T1 · Operating table OP016 · Download source PDF / archive

4DD2,400-415,440-460V,3Ph,50,60Hz,D112M,P3257439T1.pdf · SRC-bd2412ee266371cf · Website table/row/ID: 62 / 16 / 16 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	2
Printed mounting	IM3011 : VS Flange
Frame	112M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P3257439T1
Specification number	32057A001-00030
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-040

Printed rated torque: Not available; source blank not established

V059 · 4.0 kW · 2 pole · 112M · IM3011 : VS Flange

Order P3257432T1 · Operating table OP016 · Download source PDF / archive

4DD2,400-415,440-460V,3Ph,50,60Hz.D112M,P3257432T1.pdf · SRC-e4d15be2ab46f2ed · Website table/row/ID: 62 / 16 / 16 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	2
Printed mounting	IM3011 : VS Flange
Frame	112M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P3257432T1
Specification number	32057A001-00030
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-040

Printed rated torque: Not available; source blank not established

V060 · 4.0 kW · 2 pole · 112M · IM2001 : HS, Foot, Flange

Order P3257431T1 · Operating table OP016 · Download source PDF / archive

4DF2,400-415,440-460V,3Ph,50,60Hz,D112M,P3257431T1.pdf · SRC-83d7d71f865bd623 · Website table/row/ID: 62 / 16 / 16 — listed Frame: 112M

Specification	Value
Rated output (kW)	4.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	112M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0058
Sheet weight	Not stated
Revision	00
Order reference	P3257431T1
Specification number	32057A001-00033
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-024

Printed rated torque: Not available; source blank not established

V061 · 4.0 kW · 6 pole · 132M1 · IM1001 : HS, Foot

Order P4257424T1 · Operating table OP017 · Download source PDF / archive

4D6,400-415,440-460V,3Ph,50,60Hz,D132M1,P4257424T1.pdf · SRC-c813f5a8ae5d5371 · Website table/row/ID: 62 / 17 / 17 — listed Frame: 132M1

Specification	Value
Rated output (kW)	4.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	132M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0414
Sheet weight	Not stated
Revision	00
Order reference	P4257424T1
Specification number	32057A001-00050
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-094

Printed rated torque: Not available; source blank not established

V062 · 4.0 kW · 6 pole · 132M1 · IM1001 : HS, Foot

Order P4257429T1 · Operating table OP017 · Download source PDF / archive

4D6,400-415,440-460V,3Ph,50,60Hz,D132M1,P4257429T1.pdf · SRC-cdef5b1240b5f235 · Website table/row/ID: 62 / 17 / 17 — listed Frame: 132M1

Specification	Value
Rated output (kW)	4.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	132M1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0414
Sheet weight	Not stated
Revision	00
Order reference	P4257429T1
Specification number	32057A001-00050
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-094

Printed rated torque: Not available; source blank not established

V063 · 5.5 kW · 6 pole · 132M2 · IM1001:HS,Foot

Order P4257425T1 · Operating table OP018 · Download source PDF / archive

5.5D6,400-415,440-460V,3Ph,50,60Hz,D132M2,P4257425T1.pdf · SRC-b018c309ad8fcd2d · Website table/row/ID: 62 / 18 / 18 — listed Frame: 132M2

Specification	Value
Rated output (kW)	5.5
Pole count	6
Printed mounting	IM1001:HS,Foot
Frame	132M2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0561
Sheet weight	Not stated
Revision	00
Order reference	P4257425T1
Specification number	32057A001-00051
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-095

Printed rated torque: Not available; source blank not established

V064 · 5.5 kW · 2 pole · 132S1 · IM1001:HS,Foot

Order P4257026T1 · Operating table OP019 · Download source PDF / archive

5.5D2,400-415,440-460V,3Ph,50,60Hz,D132S1,P4257026T1.pdf · SRC-c3c6bde52bf5256a · Website table/row/ID: 62 / 19 / 19 — listed Frame: 132S1

Specification	Value
Rated output (kW)	5.5
Pole count	2
Printed mounting	IM1001:HS,Foot
Frame	132S1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0106
Sheet weight	Not stated
Revision	00
Order reference	P4257026T1
Specification number	32057A001-00042
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-007

Printed rated torque: Not available; source blank not established

V065 · 5.5 kW · 2 pole · 132S1 · IM3011:VS,Flange

Order P4257038T1 · Operating table OP019 · Download source PDF / archive

5.5DD2,400-415,440-460V,3Ph,50,60Hz,D132S1,P4257038T1.pdf · SRC-0fa16432660c14ad · Website table/row/ID: 62 / 19 / 19 — listed Frame: 132S1

Specification	Value
Rated output (kW)	5.5
Pole count	2
Printed mounting	IM3011:VS,Flange
Frame	132S1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0106
Sheet weight	Not stated
Revision	00
Order reference	P4257038T1
Specification number	32057A001-00038
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-041

Printed rated torque: Not available; source blank not established

V066 · 5.5 kW · 2 pole · 132S1 · IM2001:HS,Foot,Flange

Order P4257028T1 · Operating table OP019 · Download source PDF / archive

5.5DF2,400-415,440-460V,3Ph,50,60Hz,D132S1,P4257028T1.pdf · SRC-978ed133c8398a4b · Website table/row/ID: 62 / 19 / 19 — listed Frame: 132S1

Specification	Value
Rated output (kW)	5.5
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	132S1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0106
Sheet weight	Not stated
Revision	00
Order reference	P4257028T1
Specification number	32057A001-00043
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-025

Printed rated torque: Not available; source blank not established

V067 · 5.5 kW · 2 pole · 132S1 · IM2001:HS,Foot,Flange

Order P4257036T1 · Operating table OP019 · Download source PDF / archive

5.5DF2,400-415,440-460V,3Ph,50,60Hz,D132S1,P4257036T1.pdf · SRC-a0d209e7b0c9b2ce · Website table/row/ID: 62 / 19 / 19 — listed Frame: 132S1

Specification	Value
Rated output (kW)	5.5
Pole count	2
Printed mounting	IM2001:HS,Foot,Flange
Frame	132S1
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0106
Sheet weight	Not stated
Revision	00
Order reference	P4257036T1
Specification number	32057A001-00043
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-025

Printed rated torque: Not available; source blank not established

V068 · 5.5 kW · 4 pole · 132S · IM1001:HS,Foot

Order P4257032T1 · Operating table OP020 · Download source PDF / archive

5.5D4,400-415,440-460V,3Ph,50,60Hz,D132S,P4257032T1.pdf · SRC-01cd5fb91ba92910 · Website table/row/ID: 62 / 20 / 20 — listed Frame: 132S

Specification	Value
Rated output (kW)	5.5
Pole count	4
Printed mounting	IM1001:HS,Foot
Frame	132S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257032T1
Specification number	32057A001-00044
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-054

Printed rated torque: Not available; source blank not established

V069 · 5.5 kW · 4 pole · 132S · IM1001:HS,Foot

Order P4257040T1 · Operating table OP020 · Download source PDF / archive

5.5D4,400-415,440-460V,3Ph,50,60Hz,D132S,P4257040T1.pdf · SRC-ff7a37146a12af9b · Website table/row/ID: 62 / 20 / 20 — listed Frame: 132S

Specification	Value
Rated output (kW)	5.5
Pole count	4
Printed mounting	IM1001:HS,Foot
Frame	132S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257040T1
Specification number	32057A001-00044
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-054

Printed rated torque: Not available; source blank not established

V070 · 5.5 kW · 4 pole · 132S · IM3011:VS,Flange

Order P4257034T1 · Operating table OP020 · Download source PDF / archive

5.5DD4,400-415,440-460V,3Ph,50,60Hz,D132S,P4257034T1.pdf · SRC-35dc9d978aa99e69 · Website table/row/ID: 62 / 20 / 20 — listed Frame: 132S

Specification	Value
Rated output (kW)	5.5
Pole count	4
Printed mounting	IM3011:VS,Flange
Frame	132S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257034T1
Specification number	32057A001-00039
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-080

Printed rated torque: Not available; source blank not established

V071 · 5.5 kW · 4 pole · 132S · IM3011:VS,Flange

Order P4257041T1 · Operating table OP020 · Download source PDF / archive

5.5DD4,400-415,440-460V,3Ph,50,60Hz,D132S,P4257041T1.pdf · SRC-0eb868356dc10608 · Website table/row/ID: 62 / 20 / 20 — listed Frame: 132S

Specification	Value
Rated output (kW)	5.5
Pole count	4
Printed mounting	IM3011:VS,Flange
Frame	132S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257041T1
Specification number	32057A001-00039
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-080

Printed rated torque: Not available; source blank not established

V072 · 5.5 kW · 4 pole · 132S · IM2001:HS,Foot,Flange

Order P4257033T1 · Operating table OP020 · Download source PDF / archive

5.5DF4,400-415,440-460V,3Ph,50,60Hz,D132S,P4257033T1.pdf · SRC-171391d6cfc1fff1 · Website table/row/ID: 62 / 20 / 20 — listed Frame: 132S

Specification	Value
Rated output (kW)	5.5
Pole count	4
Printed mounting	IM2001:HS,Foot,Flange
Frame	132S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257033T1
Specification number	32057A001-00045
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-069

Printed rated torque: Not available; source blank not established

V073 · 7.5 kW · 4 pole · 132M · IM1001 : HS, Foot

Order P4257421T1 · Operating table OP021 · Download source PDF / archive

7.5D4,400-415,440-460V,3Ph,50,60Hz,D132M,P4257421T1.pdf · SRC-d05f2e9ad82a90a6 · Website table/row/ID: 62 / 21 / 21 — listed Frame: 132M

Specification	Value
Rated output (kW)	7.5
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	132M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0407
Sheet weight	Not stated
Revision	00
Order reference	P4257421T1
Specification number	32057A001-00048
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-055

Printed rated torque: Not available; source blank not established

V074 · 7.5 kW · 4 pole · 132M · IM1001 : HS, Foot

Order P4257426T1 · Operating table OP021 · Download source PDF / archive

7.5D4,400-415,440-460V,3Ph,50,60Hz,D132M,P4257426T1.pdf · SRC-95887e6dfc141e09 · Website table/row/ID: 62 / 21 / 21 — listed Frame: 132M

Specification	Value
Rated output (kW)	7.5
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	132M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0407
Sheet weight	Not stated
Revision	00
Order reference	P4257426T1
Specification number	32057A001-00048
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-055

Printed rated torque: Not available; source blank not established

V075 · 7.5 kW · 4 pole · 132M · IM3011 : VS Flange

Order P4257423T1 · Operating table OP021 · Download source PDF / archive

7.5DD4,400-415,440-460V,3Ph,50,60Hz,D132M,P4257423T1.pdf · SRC-720e31dbef31e712 · Website table/row/ID: 62 / 21 / 21 — listed Frame: 132M

Specification	Value
Rated output (kW)	7.5
Pole count	4
Printed mounting	IM3011 : VS Flange
Frame	132M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257423T1
Specification number	32057A001-00047
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-081

Printed rated torque: Not available; source blank not established

V076 · 7.5 kW · 4 pole · 132M · IM3011 : VS Flange

Order P4257428T1 · Operating table OP021 · Download source PDF / archive

7.5DD4,400-415,440-460V,3Ph,50,60Hz,D132M,P4257428T1.pdf · SRC-7ee62cbe4fa98e3b · Website table/row/ID: 62 / 21 / 21 — listed Frame: 132M

Specification	Value
Rated output (kW)	7.5
Pole count	4
Printed mounting	IM3011 : VS Flange
Frame	132M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0339
Sheet weight	Not stated
Revision	00
Order reference	P4257428T1
Specification number	32057A001-00047
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-081

Printed rated torque: Not available; source blank not established

V077 · 7.5 kW · 4 pole · 132M · IM2001 : HS, Foot, Flange

Order P4257427T1 · Operating table OP021 · Download source PDF / archive

7.5DF4,400-415,440-460V,3Ph,50,60Hz,D132M,P4257427T1.pdf · SRC-fffbfaa00e12c9e7 · Website table/row/ID: 62 / 21 / 21 — listed Frame: 132M

Specification	Value
Rated output (kW)	7.5
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	132M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0407
Sheet weight	Not stated
Revision	00
Order reference	P4257427T1
Specification number	32057A001-00049
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-070

Printed rated torque: Not available; source blank not established

V078 · 7.5 kW · 2 pole · 132S2 · IM1001 : HS, Foot

Order P4257027T1 · Operating table OP022 · Download source PDF / archive

7.5D2,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257027T1.pdf · SRC-afe02196c117005e · Website table/row/ID: 62 / 22 / 22 — listed Frame: 132S2

Specification	Value
Rated output (kW)	7.5
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	132S2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0146
Sheet weight	Not stated
Revision	00
Order reference	P4257027T1
Specification number	32057A001-00040
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot

Drawing reference: TTAKG25087-008

Printed rated torque: Not available; source blank not established

V079 · 7.5 kW · 2 pole · 132S2 · IM3011 : VS Flange

Order P4257031T1 · Operating table OP022 · Download source PDF / archive

7.5DD2,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257031T1.pdf · SRC-23820ce8495c2f83 · Website table/row/ID: 62 / 22 / 22 — listed Frame: 132S2

Specification	Value
Rated output (kW)	7.5
Pole count	2
Printed mounting	IM3011 : VS Flange
Frame	132S2
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0146
Sheet weight	Not stated
Revision	00
Order reference	P4257031T1
Specification number	32057A001-00037
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-042

Printed rated torque: Not available; source blank not established

V080 · 7.5 kW · 2 pole · 132S2 · IM3011 : VS Flange

Order P4257039T1 · Operating table OP022 · Download source PDF / archive

7.5DD2,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257039T1.pdf · SRC-4df9b6c2f6ccb6db · Website table/row/ID: 62 / 22 / 22 — listed Frame: 132S2

Specification	Value
Rated output (kW)	7.5
Pole count	2
Printed mounting	IM3011 : VS Flange
Frame	132S2
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0146
Sheet weight	Not stated
Revision	00
Order reference	P4257039T1
Specification number	32057A001-00037
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: TTAKG25087-042

Printed rated torque: Not available; source blank not established

V081 · 7.5 kW · 2 pole · 132S2 · IM2001 : HS, Foot, Flange

Order P4257029T1 · Operating table OP022 · Download source PDF / archive

7.5DF2,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257029T1.pdf · SRC-f7a46d5ef36fb0f5 · Website table/row/ID: 62 / 22 / 22 — listed Frame: 132S2

Specification	Value
Rated output (kW)	7.5
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	132S2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0146
Sheet weight	Not stated
Revision	00
Order reference	P4257029T1
Specification number	32057A001-00041
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-026

Printed rated torque: Not available; source blank not established

V082 · 7.5 kW · 2 pole · 132S2 · IM2001 : HS, Foot, Flange

Order P4257037T1 · Operating table OP022 · Download source PDF / archive

7.5DF2,400-415,440-460V,3Ph,50,60Hz,D132S2,P4257037T1.pdf · SRC-d7720d5951a9c9a5 · Website table/row/ID: 62 / 22 / 22 — listed Frame: 132S2

Specification	Value
Rated output (kW)	7.5
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	132S2
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	T01×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.0146
Sheet weight	Not stated
Revision	00
Order reference	P4257037T1
Specification number	32057A001-00041
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	Not stated in this sheet
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: TTAKG25087-026

Printed rated torque: Not available; source blank not established

V083 · 7.5 kW · 6 pole · 160M · IM1001 : HS, Foot

Order P6257070T1 · Operating table OP023 · Download source PDF / archive

7.5D6,400-415,440-460V,3Ph,50,60Hz,D160M,P6257070T1.pdf · SRC-9012e561f7e1166a · Website table/row/ID: 62 / 23 / 23 — listed Frame: 160M

Specification	Value
Rated output (kW)	7.5
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.503
Sheet weight	Not stated
Revision	00
Order reference	P6257070T1
Specification number	32057R001-45578
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V084 · 7.5 kW · 6 pole · 160M · IM1001 : HS, Foot

Order P6257082T1 · Operating table OP023 · Download source PDF / archive

7.5D6,400-415,440-460V,3Ph,50,60Hz,D160M,P6257082T1.pdf · SRC-b84663f4c55b191b · Website table/row/ID: 62 / 23 / 23 — listed Frame: 160M

Specification	Value
Rated output (kW)	7.5
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.503
Sheet weight	Not stated
Revision	00
Order reference	P6257082T1
Specification number	32057R001-45578
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V085 · 11.0 kW · 6 pole · 160L · IM1001 : HS, Foot

Order P6257071T1 · Operating table OP024 · Download source PDF / archive

11D6,400-415,440-460V,3Ph,50,60Hz,D160L,P6257071T1.pdf · SRC-4233227fd5670acd · Website table/row/ID: 62 / 24 / 24 — listed Frame: 160L

Specification	Value
Rated output (kW)	11.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.672
Sheet weight	Not stated
Revision	00
Order reference	P6257071T1
Specification number	32057R001-45492
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26021

Printed rated torque: Not available; source blank not established

V086 · 11.0 kW · 6 pole · 160L · IM1001 : HS, Foot

Order P6257083T1 · Operating table OP024 · Download source PDF / archive

11D6,400-415,440-460V,3Ph,50,60Hz,D160L,P6257083T1.pdf · SRC-b464bbbcc5deaa13 · Website table/row/ID: 62 / 24 / 24 — listed Frame: 160L

Specification	Value
Rated output (kW)	11.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.672
Sheet weight	Not stated
Revision	00
Order reference	P6257083T1
Specification number	32057R001-45492
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26021

Printed rated torque: Not available; source blank not established

V087 · 11.0 kW · 4 pole · 160M · IM1001 : HS, Foot

Order P6257064T1 · Operating table OP025 · Download source PDF / archive

11D4,400-415,440-460V,3Ph,50,60Hz,D160M,P6257064T1.pdf · SRC-50ba8ced9b06e2d6 · Website table/row/ID: 62 / 25 / 25 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.374
Sheet weight	Not stated
Revision	00
Order reference	P6257064T1
Specification number	32057R001-45508
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V088 · 11.0 kW · 4 pole · 160M · IM1001 : HS, Foot

Order P6257077T1 · Operating table OP025 · Download source PDF / archive

11D4,400-415,440-460V,3Ph,50,60Hz,D160M,P6257077T1.pdf · SRC-81be6d679bbefa6c · Website table/row/ID: 62 / 25 / 25 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.374
Sheet weight	Not stated
Revision	00
Order reference	P6257077T1
Specification number	32057R001-45508
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V089 · 11.0 kW · 4 pole · 160M · IM3011 : VS, Flange

Order P6257081T1 · Operating table OP025 · Download source PDF / archive

11DD4,400-415,440-460V,3Ph,50,60Hz,D160M,P6257081T1.pdf · SRC-a66769e065ead2e6 · Website table/row/ID: 62 / 25 / 25 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	160M
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.374
Sheet weight	Not stated
Revision	00
Order reference	P6257081T1
Specification number	32057R001-45507
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V090 · 11.0 kW · 4 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257066T1 · Operating table OP025 · Download source PDF / archive

11DF4,400-415,440-460V,3Ph,50,60Hz,D160M,P6257066T1.pdf · SRC-426277092ee7a585 · Website table/row/ID: 62 / 25 / 25 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.374
Sheet weight	Not stated
Revision	00
Order reference	P6257066T1
Specification number	32057R001-45367
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V091 · 11.0 kW · 4 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257079T1 · Operating table OP025 · Download source PDF / archive

11DF4,400-415,440-460V,3Ph,50,60Hz,D160M,P6257079T1.pdf · SRC-6ba85135c27731d0 · Website table/row/ID: 62 / 25 / 25 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.374
Sheet weight	Not stated
Revision	00
Order reference	P6257079T1
Specification number	32057R001-45367
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V092 · 11.0 kW · 2 pole · 160M · IM1001 : HS, Foot

Order P6257055T1 · Operating table OP026 · Download source PDF / archive

11D2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257055T1.pdf · SRC-ea64043ea1d10d43 · Website table/row/ID: 62 / 26 / 26 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.192
Sheet weight	Not stated
Revision	00
Order reference	P6257055T1
Specification number	32057R001-45478
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V093 · 11.0 kW · 2 pole · 160M · IM3011 : VS, Flange

Order P6257075T1 · Operating table OP026 · Download source PDF / archive

11DD2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257075T1.pdf · SRC-66a4c83a9348d8ea · Website table/row/ID: 62 / 26 / 26 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	160M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.192
Sheet weight	Not stated
Revision	00
Order reference	P6257075T1
Specification number	32057R001-45373
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V094 · 11.0 kW · 2 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257058T1 · Operating table OP026 · Download source PDF / archive

11DF2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257058T1.pdf · SRC-0119818300e00823 · Website table/row/ID: 62 / 26 / 26 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.192
Sheet weight	Not stated
Revision	00
Order reference	P6257058T1
Specification number	32057R001-45374
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V095 · 11.0 kW · 2 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257072T1 · Operating table OP026 · Download source PDF / archive

11DF2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257072T1.pdf · SRC-3566a6535e594c2d · Website table/row/ID: 62 / 26 / 26 — listed Frame: 160M

Specification	Value
Rated output (kW)	11.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R2-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.192
Sheet weight	Not stated
Revision	00
Order reference	P6257072T1
Specification number	32057R001-45374
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V096 · 15.0 kW · 4 pole · 160L · IM1001 : HS, Foot

Order P6257065T1 · Operating table OP027 · Download source PDF / archive

15D4,400-415,440-460V,3Ph,50,60Hz,D160L,P6257065T1.pdf · SRC-261516ca99c7caa9 · Website table/row/ID: 62 / 27 / 27 — listed Frame: 160L

Specification	Value
Rated output (kW)	15.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.484
Sheet weight	Not stated
Revision	00
Order reference	P6257065T1
Specification number	32057R001-45365
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26021

Printed rated torque: Not available; source blank not established

V097 · 15.0 kW · 4 pole · 160L · IM1001 : HS, Foot

Order P6257078T1 · Operating table OP027 · Download source PDF / archive

15D4,400-415,440-460V,3Ph,50,60Hz,D160L,P6257078T1.pdf · SRC-91a74d71594220bb · Website table/row/ID: 62 / 27 / 27 — listed Frame: 160L

Specification	Value
Rated output (kW)	15.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.484
Sheet weight	Not stated
Revision	00
Order reference	P6257078T1
Specification number	32057R001-45365
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26021

Printed rated torque: Not available; source blank not established

V098 · 15.0 kW · 4 pole · 160L · IM3011 : VS, Flange

Order P6257069T1 · Operating table OP027 · Download source PDF / archive

15DD4,400-415,440-460V,3Ph,50,60Hz,D160L,P6257069T1.pdf · SRC-f202f8281671dd68 · Website table/row/ID: 62 / 27 / 27 — listed Frame: 160L

Specification	Value
Rated output (kW)	15.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	160L
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.484
Sheet weight	Not stated
Revision	00
Order reference	P6257069T1
Specification number	32057R001-45581
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V099 · 15.0 kW · 4 pole · 160L · IM2001 : HS, Foot, Flange

Order P6257067T1 · Operating table OP027 · Download source PDF / archive

15DF4,400-415,440-460V,3Ph,50,60Hz,D160L,P6257067T1.pdf · SRC-b277b6f84859659f · Website table/row/ID: 62 / 27 / 27 — listed Frame: 160L

Specification	Value
Rated output (kW)	15.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.484
Sheet weight	Not stated
Revision	00
Order reference	P6257067T1
Specification number	32057R001-45357
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A26022

Printed rated torque: Not available; source blank not established

V100 · 15.0 kW · 4 pole · 160L · IM2001 : HS, Foot, Flange

Order P6257080T1 · Operating table OP027 · Download source PDF / archive

15DF4,400-415,440-460V,3Ph,50,60Hz,D160L,P6257080T1.pdf · SRC-50317d95f8c0595f · Website table/row/ID: 62 / 27 / 27 — listed Frame: 160L

Specification	Value
Rated output (kW)	15.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.484
Sheet weight	Not stated
Revision	00
Order reference	P6257080T1
Specification number	32057R001-45357
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A26022

Printed rated torque: Not available; source blank not established

V101 · 15.0 kW · 6 pole · 180L · IM1001 : HS, Foot

Order P6257538T1 · Operating table OP028 · Download source PDF / archive

15D6,400-415,440-460V,3Ph,50,60Hz,D180L,P6257538T1.pdf · SRC-61a51a2a9fbbe96b · Website table/row/ID: 62 / 28 / 28 — listed Frame: 180L

Specification	Value
Rated output (kW)	15.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	180L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.655
Sheet weight	Not stated
Revision	00
Order reference	P6257538T1
Specification number	32057R001-45469
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26910

Printed rated torque: Not available; source blank not established

V102 · 15.0 kW · 6 pole · 180L · IM1001 : HS, Foot

Order P6257542T1 · Operating table OP028 · Download source PDF / archive

15D6,400-415,440-460V,3Ph,50,60Hz,D180L,P6257542T1.pdf · SRC-56e68c7b6cd9123d · Website table/row/ID: 62 / 28 / 28 — listed Frame: 180L

Specification	Value
Rated output (kW)	15.0
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	180L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.655
Sheet weight	Not stated
Revision	00
Order reference	P6257542T1
Specification number	32057R001-45469
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26910

Printed rated torque: Not available; source blank not established

V103 · 15.0 kW · 2 pole · 160M · IM1001 : HS, Foot

Order P6257056T1 · Operating table OP029 · Download source PDF / archive

15D2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257056T1.pdf · SRC-e62e53bbcab2916f · Website table/row/ID: 62 / 29 / 29 — listed Frame: 160M

Specification	Value
Rated output (kW)	15.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.218
Sheet weight	Not stated
Revision	00
Order reference	P6257056T1
Specification number	32057R001-45553
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A20011

Printed rated torque: Not available; source blank not established

V104 · 15.0 kW · 2 pole · 160M · IM3011 : VS, Flange

Order P6257062T1 · Operating table OP029 · Download source PDF / archive

15DD2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257062T1.pdf · SRC-672780f8a8069957 · Website table/row/ID: 62 / 29 / 29 — listed Frame: 160M

Specification	Value
Rated output (kW)	15.0
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	160M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.218
Sheet weight	Not stated
Revision	00
Order reference	P6257062T1
Specification number	32057R001-45479
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V105 · 15.0 kW · 2 pole · 160M · IM3011 : VS, Flange

Order P6257076T1 · Operating table OP029 · Download source PDF / archive

15DD2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257076T1.pdf · SRC-5f287c333a80e9e2 · Website table/row/ID: 62 / 29 / 29 — listed Frame: 160M

Specification	Value
Rated output (kW)	15.0
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	160M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.218
Sheet weight	Not stated
Revision	00
Order reference	P6257076T1
Specification number	32057R001-45479
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V106 · 15.0 kW · 2 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257059T1 · Operating table OP029 · Download source PDF / archive

15DF2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257059T1.pdf · SRC-620b0ab49c0a342a · Website table/row/ID: 62 / 29 / 29 — listed Frame: 160M

Specification	Value
Rated output (kW)	15.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.218
Sheet weight	Not stated
Revision	00
Order reference	P6257059T1
Specification number	32057R001-45533
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V107 · 15.0 kW · 2 pole · 160M · IM2001 : HS, Foot, Flange

Order P6257073T1 · Operating table OP029 · Download source PDF / archive

15DF2,400-415,440-460V,3Ph,50,60Hz,D160M,P6257073T1.pdf · SRC-cf049c606db6f483 · Website table/row/ID: 62 / 29 / 29 — listed Frame: 160M

Specification	Value
Rated output (kW)	15.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.218
Sheet weight	Not stated
Revision	00
Order reference	P6257073T1
Specification number	32057R001-45533
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A20012

Printed rated torque: Not available; source blank not established

V108 · 18.5 kW · 2 pole · 160L · IM1001 : HS, Foot

Order P6257057T1 · Operating table OP030 · Download source PDF / archive

18.5D2,400-415,440-460V,3Ph,50,60Hz,D160L,P6257057T1.pdf · SRC-7c5af6d3a3ee96aa · Website table/row/ID: 62 / 30 / 30 — listed Frame: 160L

Specification	Value
Rated output (kW)	18.5
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.250
Sheet weight	Not stated
Revision	00
Order reference	P6257057T1
Specification number	32057R001-45580
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26021

Printed rated torque: Not available; source blank not established

V109 · 18.5 kW · 2 pole · 160L · IM3011 : VS, Flange

Order P6257063T1 · Operating table OP030 · Download source PDF / archive

18.5DD2,400-415,440-460V,3Ph,50,60Hz,D160L,P6257063T1.pdf · SRC-506070de9cc0698c · Website table/row/ID: 62 / 30 / 30 — listed Frame: 160L

Specification	Value
Rated output (kW)	18.5
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	160L
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.250
Sheet weight	Not stated
Revision	00
Order reference	P6257063T1
Specification number	32057R001-45376
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A19517

Printed rated torque: Not available; source blank not established

V110 · 18.5 kW · 2 pole · 160L · IM2001 : HS, Foot, Flange

Order P6257060T1 · Operating table OP030 · Download source PDF / archive

18.5DF2,400-415,440-460V,3Ph,50,60Hz,D160L,P6257060T1.pdf · SRC-3cf358ad136edec7 · Website table/row/ID: 62 / 30 / 30 — listed Frame: 160L

Specification	Value
Rated output (kW)	18.5
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.250
Sheet weight	Not stated
Revision	00
Order reference	P6257060T1
Specification number	32057R001-45377
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A26022

Printed rated torque: Not available; source blank not established

V111 · 18.5 kW · 2 pole · 160L · IM2001 : HS, Foot, Flange

Order P6257074T1 · Operating table OP030 · Download source PDF / archive

18.5DF2,400-415,440-460V,3Ph,50,60Hz,D160L,P6257074T1.pdf · SRC-dba19ab18e233f3c · Website table/row/ID: 62 / 30 / 30 — listed Frame: 160L

Specification	Value
Rated output (kW)	18.5
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	160L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	0.250
Sheet weight	Not stated
Revision	00
Order reference	P6257074T1
Specification number	32057R001-45377
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A26022

Printed rated torque: Not available; source blank not established

V112 · 18.5 kW · 4 pole · 180M · IM1001 : HS, Foot

Order P6257540T1 · Operating table OP031 · Download source PDF / archive

18.5D4,400-415,440-460V,3Ph,50,60Hz,D180M,P6257540T1.pdf · SRC-9d8798829bedf9f2 · Website table/row/ID: 62 / 31 / 31 — listed Frame: 180M

Specification	Value
Rated output (kW)	18.5
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	180M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.812
Sheet weight	Not stated
Revision	00
Order reference	P6257540T1
Specification number	32057R001-45554
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A49006

Printed rated torque: Not available; source blank not established

V113 · 18.5 kW · 4 pole · 180M · IM3011 : VS, Flange

Order P6257536T1 · Operating table OP031 · Download source PDF / archive

18.5DD4,400-415,440-460V,3Ph,50,60Hz,D180M,P6257536T1.pdf · SRC-0d86c6e076da136f · Website table/row/ID: 62 / 31 / 31 — listed Frame: 180M

Specification	Value
Rated output (kW)	18.5
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	180M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.812
Sheet weight	Not stated
Revision	00
Order reference	P6257536T1
Specification number	32057R001-45570
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A24004

Printed rated torque: Not available; source blank not established

V114 · 18.5 kW · 4 pole · 180M · IM2001 : HS, Foot, Flange

Order P6257535T1 · Operating table OP031 · Download source PDF / archive

18.5DF4,400-415,440-460V,3Ph,50,60Hz,D180M,P6257535T1.pdf · SRC-a111d68b1885f61c · Website table/row/ID: 62 / 31 / 31 — listed Frame: 180M

Specification	Value
Rated output (kW)	18.5
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	180M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R3.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.812
Sheet weight	Not stated
Revision	00
Order reference	P6257535T1
Specification number	32057R001-45534
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A49005

Printed rated torque: Not available; source blank not established

V115 · 18.5 kW · 6 pole · 200L · IM1001 : HS, Foot

Order P7257033T1 · Operating table OP032 · Download source PDF / archive

18.5D6,400-415,440-460V,3Ph,50,60Hz,D200L,P7257033T1.pdf · SRC-e4ac1cd95373b059 · Website table/row/ID: 62 / 32 / 32 — listed Frame: 200L

Specification	Value
Rated output (kW)	18.5
Pole count	6
Printed mounting	IM1001 : HS, Foot
Frame	200L
Model	AESV4S
Connection	3Δ/3Y
Lead terminals	(R5.5-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	2.791
Sheet weight	Not stated
Revision	00
Order reference	P7257033T1
Specification number	32057R001-45536
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A29715

Printed rated torque: Not available; source blank not established

V116 · 22.0 kW · 2 pole · 180M · IM3011 : VS, Flange

Order P6257532T1 · Operating table OP033 · Download source PDF / archive

22DD2,400-415,440-460V,3Ph,50,60Hz,D180M,P6257532T1.pdf · SRC-6b84967565753751 · Website table/row/ID: 62 / 33 / 33 — listed Frame: 180M

Specification	Value
Rated output (kW)	22.0
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	180M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R5.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.330
Sheet weight	Not stated
Revision	00
Order reference	P6257532T1
Specification number	32057R001-45509
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A24004

Printed rated torque: Not available; source blank not established

V117 · 22.0 kW · 2 pole · 180M · IM2001 : HS, Foot, Flange

Order P6257531T1 · Operating table OP033 · Download source PDF / archive

22DF2,400-415,440-460V,3Ph,50,60Hz,D180M,P6257531T1.pdf · SRC-7ce7e0afb55bb6bf · Website table/row/ID: 62 / 33 / 33 — listed Frame: 180M

Specification	Value
Rated output (kW)	22.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	180M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R5.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.330
Sheet weight	Not stated
Revision	00
Order reference	P6257531T1
Specification number	32057R001-45471
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A49005

Printed rated torque: Not available; source blank not established

V118 · 22.0 kW · 2 pole · 180M · IM2001 : HS, Foot, Flange

Order P6257539T1 · Operating table OP033 · Download source PDF / archive

22DF2,400-415,440-460V,3Ph,50,60Hz,D180M,P6257539T1.pdf · SRC-bd3d35c64dcd6321 · Website table/row/ID: 62 / 33 / 33 — listed Frame: 180M

Specification	Value
Rated output (kW)	22.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	180M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R5.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.330
Sheet weight	Not stated
Revision	00
Order reference	P6257539T1
Specification number	32057R001-45471
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A49005

Printed rated torque: Not available; source blank not established

V119 · 22.0 kW · 4 pole · 180L · IM1001 : HS, Foot

Order P6257534T1 · Operating table OP034 · Download source PDF / archive

22D4,400-415,440-460V,3Ph,50,60Hz,D180L,P6257534T1.pdf · SRC-b430a70d3dc383a6 · Website table/row/ID: 62 / 34 / 34 — listed Frame: 180L

Specification	Value
Rated output (kW)	22.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	180L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R5.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.928
Sheet weight	Not stated
Revision	00
Order reference	P6257534T1
Specification number	32057R001-45470
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26910

Printed rated torque: Not available; source blank not established

V120 · 22.0 kW · 4 pole · 180L · IM1001 : HS, Foot

Order P6257541T1 · Operating table OP034 · Download source PDF / archive

22D4,400-415,440-460V,3Ph,50,60Hz,D180L,P6257541T1.pdf · SRC-82bf4afc32661888 · Website table/row/ID: 62 / 34 / 34 — listed Frame: 180L

Specification	Value
Rated output (kW)	22.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	180L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R5.5-6)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	0.928
Sheet weight	Not stated
Revision	00
Order reference	P6257541T1
Specification number	32057R001-45470
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A26910

Printed rated torque: Not available; source blank not established

V121 · 30.0 kW · 2 pole · 200L · IM1001 : HS, Foot

Order P7257026T1 · Operating table OP035 · Download source PDF / archive

30D2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257026T1.pdf · SRC-af3bcf2888048ebd · Website table/row/ID: 62 / 35 / 35 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.074
Sheet weight	Not stated
Revision	00
Order reference	P7257026T1
Specification number	32057R001-45468
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A29715

Printed rated torque: Not available; source blank not established

V122 · 30.0 kW · 2 pole · 200L · IM3011 : VS, Flange

Order P7257030T1 · Operating table OP035 · Download source PDF / archive

30DD2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257030T1.pdf · SRC-b82dc55fb2103633 · Website table/row/ID: 62 / 35 / 35 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	2
Printed mounting	IM3011 : VS, Flange
Frame	200L
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.074
Sheet weight	Not stated
Revision	00
Order reference	P7257030T1
Specification number	32057R001-45495
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A293290

Printed rated torque: Not available; source blank not established

V123 · 30.0 kW · 2 pole · 200L · IM2001 : HS, Foot, Flange

Order P7257028T1 · Operating table OP035 · Download source PDF / archive

30DF2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257028T1.pdf · SRC-968d387ea9c243b0 · Website table/row/ID: 62 / 35 / 35 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.074
Sheet weight	Not stated
Revision	00
Order reference	P7257028T1
Specification number	32057R001-45494
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A29716

Printed rated torque: Not available; source blank not established

V124 · 30.0 kW · 2 pole · 200L · IM2001 : HS, Foot, Flange

Order P7257034T1 · Operating table OP035 · Download source PDF / archive

30DF2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257034T1.pdf · SRC-c153578b98aac8a3 · Website table/row/ID: 62 / 35 / 35 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.074
Sheet weight	Not stated
Revision	00
Order reference	P7257034T1
Specification number	32057R001-45494
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A29716

Printed rated torque: Not available; source blank not established

V125 · 30.0 kW · 4 pole · 200L · IM1001 : HS, Foot

Order P7257031T1 · Operating table OP036 · Download source PDF / archive

30D4,400-415,440-460V,3Ph,50,60Hz,D200L,P7257031T1.pdf · SRC-b5bb6fb38d03bfa8 · Website table/row/ID: 62 / 36 / 36 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.484
Sheet weight	Not stated
Revision	00
Order reference	P7257031T1
Specification number	32057R001-45531
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A29715

Printed rated torque: Not available; source blank not established

V126 · 30.0 kW · 4 pole · 200L · IM1001 : HS, Foot

Order P7257036T1 · Operating table OP036 · Download source PDF / archive

30D4,400-415,440-460V,3Ph,50,60Hz,D200L,P7257036T1.pdf · SRC-d4e8850b25c7e4de · Website table/row/ID: 62 / 36 / 36 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.484
Sheet weight	Not stated
Revision	00
Order reference	P7257036T1
Specification number	32057R001-45531
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A29715

Printed rated torque: Not available; source blank not established

V127 · 30.0 kW · 4 pole · 200L · IM3011 : VS, Flange

Order P7257032T1 · Operating table OP036 · Download source PDF / archive

30DD4,400-415,440-460V,3Ph,50,60Hz,D200L,P7257032T1.pdf · SRC-6b9d2b08164832eb · Website table/row/ID: 62 / 36 / 36 — listed Frame: 200L

Specification	Value
Rated output (kW)	30.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	200L
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.484
Sheet weight	Not stated
Revision	00
Order reference	P7257032T1
Specification number	32057R001-45556
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A293290

Printed rated torque: Not available; source blank not established

V128 · 37.0 kW · 2 pole · 200L · IM1001 : HS, Foot

Order P7257027T1 · Operating table OP037 · Download source PDF / archive

37D2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257027T1.pdf · SRC-746121afdff7d3a9 · Website table/row/ID: 62 / 37 / 37 — listed Frame: 200L

Specification	Value
Rated output (kW)	37.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.187
Sheet weight	Not stated
Revision	00
Order reference	P7257027T1
Specification number	32057R001-45558
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A29715

Printed rated torque: Not available; source blank not established

V129 · 37.0 kW · 2 pole · 200L · IM2001 : HS, Foot, Flange

Order P7257029T1 · Operating table OP037 · Download source PDF / archive

37DF2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257029T1.pdf · SRC-0bab1ff87cc2f07f · Website table/row/ID: 62 / 37 / 37 — listed Frame: 200L

Specification	Value
Rated output (kW)	37.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.187
Sheet weight	Not stated
Revision	00
Order reference	P7257029T1
Specification number	32057R001-45532
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A29716

Printed rated torque: Not available; source blank not established

V130 · 37.0 kW · 2 pole · 200L · IM2001 : HS, Foot, Flange

Order P7257035T1 · Operating table OP037 · Download source PDF / archive

37DF2,400-415,440-460V,3Ph,50,60Hz,D200L,P7257035T1.pdf · SRC-b30a690582fb6298 · Website table/row/ID: 62 / 37 / 37 — listed Frame: 200L

Specification	Value
Rated output (kW)	37.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	200L
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	1.187
Sheet weight	Not stated
Revision	00
Order reference	P7257035T1
Specification number	32057R001-45532
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A29716

Printed rated torque: Not available; source blank not established

V131 · 37.0 kW · 4 pole · 225S · IM1001 : HS, Foot

Order P7257323T1 · Operating table OP038 · Download source PDF / archive

37D4,400-415,440-460V,3Ph,50,60Hz,D225S,P7257323T1.pdf · SRC-5638bd05b90222e5 · Website table/row/ID: 62 / 38 / 38 — listed Frame: 225S

Specification	Value
Rated output (kW)	37.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	225S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	2.897
Sheet weight	Not stated
Revision	00
Order reference	P7257323T1
Specification number	32057R001-45555
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A30773

Printed rated torque: Not available; source blank not established

V132 · 37.0 kW · 4 pole · 225S · IM1001 : HS, Foot

Order P7257328T1 · Operating table OP038 · Download source PDF / archive

37D4,400-415,440-460V,3Ph,50,60Hz,D225S,P7257328T1.pdf · SRC-08569016abf168b4 · Website table/row/ID: 62 / 38 / 38 — listed Frame: 225S

Specification	Value
Rated output (kW)	37.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	225S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	2.897
Sheet weight	Not stated
Revision	00
Order reference	P7257328T1
Specification number	32057R001-45555
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A30773

Printed rated torque: Not available; source blank not established

V133 · 37.0 kW · 4 pole · 225S · IM3011 : VS, Flange

Order P7257325T1 · Operating table OP038 · Download source PDF / archive

37DD4,400-415,440-460V,3Ph,50,60Hz,D225S,P7257325T1.pdf · SRC-3c0caf0fb81bc170 · Website table/row/ID: 62 / 38 / 38 — listed Frame: 225S

Specification	Value
Rated output (kW)	37.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	225S
Model	AESU4S
Connection	2Δ/2Y
Lead terminals	(R8-8)×6
Lubricant	Not specified
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	2.897
Sheet weight	Not stated
Revision	00
Order reference	P7257325T1
Specification number	32057R001-45520
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A31607

Printed rated torque: Not available; source blank not established

V134 · 45.0 kW · 2 pole · 225M · IM1001 : HS, Foot

Order P7257321T1 · Operating table OP039 · Download source PDF / archive

45D2,400-415,440-460V,3Ph,50,60Hz,D225M,P7257321T1.pdf · SRC-9c3c4f9afa85a1cb · Website table/row/ID: 62 / 39 / 39 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	225M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	1.345
Sheet weight	Not stated
Revision	00
Order reference	P7257321T1
Specification number	32057R001-45576
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A34148

Printed rated torque: Not available; source blank not established

V135 · 45.0 kW · 2 pole · 225M · IM2001 : HS, Foot, Flange

Order P7257322T1 · Operating table OP039 · Download source PDF / archive

45DF2,400-415,440-460V,3Ph,50,60Hz,D225M,P7257322T1.pdf · SRC-67b81ca968e68b4f · Website table/row/ID: 62 / 39 / 39 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	225M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	1.345
Sheet weight	Not stated
Revision	00
Order reference	P7257322T1
Specification number	32057R001-45523
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A34146

Printed rated torque: Not available; source blank not established

V136 · 45.0 kW · 2 pole · 225M · IM2001 : HS, Foot, Flange

Order P7257327T1 · Operating table OP039 · Download source PDF / archive

45DF2,400-415,440-460V,3Ph,50,60Hz,D225M,P7257327T1.pdf · SRC-bfba2f5052fe5118 · Website table/row/ID: 62 / 39 / 39 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	225M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	1.345
Sheet weight	Not stated
Revision	00
Order reference	P7257327T1
Specification number	32057R001-45523
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A34146

Printed rated torque: Not available; source blank not established

V137 · 45.0 kW · 4 pole · 225M · IM1001 : HS, Foot

Order P7257324T1 · Operating table OP040 · Download source PDF / archive

45D4,400-415,440-460V,3Ph,50,60Hz,D225M,P7257324T1.pdf · SRC-d88557b1ec942d30 · Website table/row/ID: 62 / 40 / 40 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	225M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	3.326
Sheet weight	Not stated
Revision	00
Order reference	P7257324T1
Specification number	32057R001-45488
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A34321

Printed rated torque: Not available; source blank not established

V138 · 45.0 kW · 4 pole · 225M · IM1001 : HS, Foot

Order P7257329T1 · Operating table OP040 · Download source PDF / archive

45D4,400-415,440-460V,3Ph,50,60Hz,D225M,P7257329T1.pdf · SRC-977f0154c0c6e4d1 · Website table/row/ID: 62 / 40 / 40 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	225M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	3.326
Sheet weight	Not stated
Revision	00
Order reference	P7257329T1
Specification number	32057R001-45488
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A34321

Printed rated torque: Not available; source blank not established

V139 · 45.0 kW · 4 pole · 225M · IM3011 : VS, Flange

Order P7257326T1 · Operating table OP040 · Download source PDF / archive

45DD4,400-415,440-460V,3Ph,50,60Hz,D225M,P7257326T1.pdf · SRC-f0c09e5f4e5d8af8 · Website table/row/ID: 62 / 40 / 40 — listed Frame: 225M

Specification	Value
Rated output (kW)	45.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	225M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R14-8)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	3.326
Sheet weight	Not stated
Revision	00
Order reference	P7257326T1
Specification number	32057R001-45487
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A34507

Printed rated torque: Not available; source blank not established

V140 · 55.0 kW · 2 pole · 250M · IM1001 : HS, Foot

Order P7257720T1 · Operating table OP041 · Download source PDF / archive

55D2,400-415,440-460V,3Ph,50,60Hz,D250M,P7257720T1.pdf · SRC-2c5dac046d502571 · Website table/row/ID: 62 / 41 / 41 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	2.111
Sheet weight	Not stated
Revision	00
Order reference	P7257720T1
Specification number	32057R001-45497
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A37105

Printed rated torque: Not available; source blank not established

V141 · 55.0 kW · 2 pole · 250M · IM2001 : HS, Foot, Flange

Order P7257721T1 · Operating table OP041 · Download source PDF / archive

55DF2,400-415,440-460V,3Ph,50,60Hz,D250M,P7257721T1.pdf · SRC-93ebb36430bcfe62 · Website table/row/ID: 62 / 41 / 41 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	2.111
Sheet weight	Not stated
Revision	00
Order reference	P7257721T1
Specification number	32057R001-45549
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A37106

Printed rated torque: Not available; source blank not established

V142 · 55.0 kW · 2 pole · 250M · IM2001 : HS, Foot, Flange

Order P7257724T1 · Operating table OP041 · Download source PDF / archive

55DF2,400-415,440-460V,3Ph,50,60Hz,D250M,P7257724T1.pdf · SRC-9ae072301c8301c3 · Website table/row/ID: 62 / 41 / 41 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	2.111
Sheet weight	Not stated
Revision	00
Order reference	P7257724T1
Specification number	32057R001-45549
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A37106

Printed rated torque: Not available; source blank not established

V143 · 55.0 kW · 4 pole · 250M · IM1001 : HS, Foot

Order P7257722T1 · Operating table OP042 · Download source PDF / archive

55D4,400-415,440-460V,3Ph,50,60Hz,D250M,P7257722T1.pdf · SRC-79d62197fc29fc2a · Website table/row/ID: 62 / 42 / 42 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	4.674
Sheet weight	Not stated
Revision	00
Order reference	P7257722T1
Specification number	32057R001-45550
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A37107

Printed rated torque: Not available; source blank not established

V144 · 55.0 kW · 4 pole · 250M · IM1001 : HS, Foot

Order P7257725T1 · Operating table OP042 · Download source PDF / archive

55D4,400-415,440-460V,3Ph,50,60Hz,D250M,P7257725T1.pdf · SRC-732c2128c928584d · Website table/row/ID: 62 / 42 / 42 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	4.674
Sheet weight	Not stated
Revision	00
Order reference	P7257725T1
Specification number	32057R001-45550
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A37107

Printed rated torque: Not available; source blank not established

V145 · 55.0 kW · 4 pole · 250M · IM3011 : VS, Flange

Order P7257723T1 · Operating table OP042 · Download source PDF / archive

55DD4,400-415,440-460V,3Ph,50,60Hz,D250M,P7257723T1.pdf · SRC-5ffe1d6ad95b1974 · Website table/row/ID: 62 / 42 / 42 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	4
Printed mounting	IM3011 : VS, Flange
Frame	250M
Model	AESU4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	4.674
Sheet weight	Not stated
Revision	00
Order reference	P7257723T1
Specification number	32057R001-45496
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Vertical flange

Drawing reference: 32049A35691

Printed rated torque: Not available; source blank not established

V146 · 55.0 kW · 4 pole · 250M · IM2001 : HS, Foot, Flange

Order P7257726T1 · Operating table OP042 · Download source PDF / archive

55DF4,400-415,440-460V,3Ph,50,60Hz,D250M,P7257726T1.pdf · SRC-5c0251ae55bace8f · Website table/row/ID: 62 / 42 / 42 — listed Frame: 250M

Specification	Value
Rated output (kW)	55.0
Pole count	4
Printed mounting	IM2001 : HS, Foot, Flange
Frame	250M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R14-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	4.674
Sheet weight	Not stated
Revision	00
Order reference	P7257726T1
Specification number	32057R001-45466
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A37108

Printed rated torque: Not available; source blank not established

V147 · 75.0 kW · 2 pole · 280S · IM1001 : HS, Foot

Order P9257014T1 · Operating table OP043 · Download source PDF / archive

75D2,400-415,440-460V,3Ph,50,60Hz,D280S,P9257014T1.pdf · SRC-759dd78e38c3f028 · Website table/row/ID: 62 / 43 / 43 — listed Frame: 280S

Specification	Value
Rated output (kW)	75.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	280S
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R22-10)×6
Lubricant	Not specified
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	3.600
Sheet weight	Not stated
Revision	00
Order reference	P9257014T1
Specification number	32057R001-45530
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A39221

Printed rated torque: Not available; source blank not established

V148 · 75.0 kW · 2 pole · 280S · IM2001 : HS, Foot, Flange

Order P9257023T1 · Operating table OP043 · Download source PDF / archive

75DF2,400-415,440-460V,3Ph,50,60Hz,D280S,P9257023T1.pdf · SRC-92782cb6c2d2381d · Website table/row/ID: 62 / 43 / 43 — listed Frame: 280S

Specification	Value
Rated output (kW)	75.0
Pole count	2
Printed mounting	IM2001 : HS, Foot, Flange
Frame	280S
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R8-8)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	2.446
Sheet weight	Not stated
Revision	00
Order reference	P9257023T1
Specification number	32057R001-45535
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot + flange

Drawing reference: 32049A39220

Printed rated torque: Not available; source blank not established

V149 · 75.0 kW · 4 pole · 280S · IM1001 : HS, Foot

Order P9257016T1 · Operating table OP044 · Download source PDF / archive

75D4,400-415,440-460V,3Ph,50,60Hz,D280S,P9257016T1.pdf · SRC-334e819f1f203183 · Website table/row/ID: 62 / 44 / 44 — listed Frame: 280M

Specification	Value
Rated output (kW)	75.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	280S
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R22-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	8.000
Sheet weight	Not stated
Revision	01
Order reference	P9257016T1
Specification number	32057R001-45572
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A39224

Printed rated torque: Not available; source blank not established

V150 · 75.0 kW · 4 pole · 280S · IM1001 : HS, Foot

Order P9257024T1 · Operating table OP044 · Download source PDF / archive

75D4,400-415,440-460V,3Ph,50,60Hz,D280S,P9257024T1.pdf · SRC-b540a15897235ca4 · Website table/row/ID: 62 / 44 / 44 — listed Frame: 280M

Specification	Value
Rated output (kW)	75.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	280S
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R22-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	8.000
Sheet weight	Not stated
Revision	01
Order reference	P9257024T1
Specification number	32057R001-45572
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A39224

Printed rated torque: Not available; source blank not established

V151 · 90.0 kW · 2 pole · 280M · IM1001 : HS, Foot

Order P9257015T1 · Operating table OP045 · Download source PDF / archive

90D2,400-415,440-460V,3Ph,50,60Hz,D280M,P9257015T1.pdf · SRC-dce671b56d77996d · Website table/row/ID: 62 / 45 / 45 — listed Frame: 280M

Specification	Value
Rated output (kW)	90.0
Pole count	2
Printed mounting	IM1001 : HS, Foot
Frame	280M
Model	AESV4S
Connection	2Δ/2Y
Lead terminals	(R22-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	2.800
Sheet weight	Not stated
Revision	00
Order reference	P9257015T1
Specification number	32057R001-45514
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A41748

Printed rated torque: Not available; source blank not established

V152 · 90.0 kW · 4 pole · 280M · IM1001 : HS, Foot

Order P9257017T1 · Operating table OP046 · Download source PDF / archive

90D4,400-415,440-460V,3Ph,50,60Hz,D280M,P9257017T1.pdf · SRC-dd3910fc2cebece3 · Website table/row/ID: 62 / 46 / 46 — listed Frame: 280M

Specification	Value
Rated output (kW)	90.0
Pole count	4
Printed mounting	IM1001 : HS, Foot
Frame	280M
Model	AESV4S
Connection	Δ/Y
Lead terminals	(R22-10)×6
Lubricant	Mobil Polyrex EM grease
Paint	Munsell 3.5 GY 6.9/0.4
Rotor GD² (kg m²)	9.200
Sheet weight	Not stated
Revision	00
Order reference	P9257017T1
Specification number	32057R001-45575
Drive method	Direct coupling
Frame assignment standard	IEC
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated

Mounting: Foot

Drawing reference: 32049A41749

Printed rated torque: Not available; source blank not established

V153 · 110.0 kW · 4 pole · 315S · IM1001 : HS, Foot (B3)

Order AC257010T1 · Operating table OP047 · Download source PDF / archive

110D4,400-415,440-460V,3Ph,50,60Hz,D315S,AC257010T1_01.pdf · SRC-32847b5e86871a99 · Website table/row/ID: 62 / 47 / 47 — listed Frame: D315S

Specification	Value
Rated output (kW)	110.0
Pole count	4
Printed mounting	IM1001 : HS, Foot (B3)
Frame	315S
Model	AESV4S
Connection	Not stated
Lead terminals	(R22-12)×6
Lubricant	Mobil Polyrex EM grease
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	Not stated
Sheet weight	950 kg
Revision	01
Order reference	AC257010T1
Specification number	3W057H186-86253
Drive method	Direct coupling
Frame assignment standard	TECO
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated
Printed rated torque (kg m (printed))	71.9

Mounting: Foot

Drawing reference: 3W042D451/00

V154 · 132.0 kW · 2 pole · 315M · IM1001 : HS, Foot (B3)

Order AC257009T1 · Operating table OP048 · Download source PDF / archive

132D2,400-415,440-460V,3Ph,50,60Hz,D315M,AC257009T1_03.pdf · SRC-ae6fc23e9c361eea · Website table/row/ID: 62 / 48 / 48 — listed Frame: 315M

Specification	Value
Rated output (kW)	132.0
Pole count	2
Printed mounting	IM1001 : HS, Foot (B3)
Frame	315M
Model	AESV4S
Connection	Not stated
Lead terminals	(R38-12)×6
Lubricant	Mobil Polyrex EM grease
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	Not stated
Sheet weight	860 kg
Revision	03
Order reference	AC257009T1
Specification number	3W057H186-86249
Drive method	Direct flexible coupling
Frame assignment standard	TECO
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated
Printed rated torque (kg m (printed))	43.2

Mounting: Foot

Drawing reference: 3W042D481/02

V155 · 132.0 kW · 4 pole · 315M · IM1001 : HS, Foot (B3)

Order AC257011T1 · Operating table OP049 · Download source PDF / archive

132D4400-415440-460V3Ph5060HzD315MAC257011T1_01.pdf · SRC-da6a6ff9151f5092 · Website table/row/ID: 62 / 49 / 49 — listed Frame: D315M

Specification	Value
Rated output (kW)	132.0
Pole count	4
Printed mounting	IM1001 : HS, Foot (B3)
Frame	315M
Model	AESV4S
Connection	Not stated
Lead terminals	(R38-12)×6
Lubricant	Mobil Polyrex EM grease
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	Not stated
Sheet weight	1010 kg
Revision	01
Order reference	AC257011T1
Specification number	3W057H186-86257
Drive method	Direct coupling
Frame assignment standard	TECO
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated
Printed rated torque (kg m (printed))	86.3

Mounting: Foot

Drawing reference: 3W042D480/00

V156 · 200.0 kW · 2 pole · 315L · IM1001 : HS, Foot (B3)

Order AC257012T1 · Operating table OP050 · Download source PDF / archive

200D2,400-415,440-460V,3Ph,50,60Hz,D315L,AC257012T1_01.pdf · SRC-ec545014883fa3eb · Website table/row/ID: 62 / 50 / 50 — listed Frame: 315L

Specification	Value
Rated output (kW)	200.0
Pole count	2
Printed mounting	IM1001 : HS, Foot (B3)
Frame	315L
Model	AESV4S
Connection	Not stated
Lead terminals	(R60-12)×6
Lubricant	Mobil Polyrex EM grease
Paint	AS2700S-N35(3.5 GY 6.9/0.4)
Rotor GD² (kg m²)	Not stated
Sheet weight	1220 kg
Revision	01
Order reference	AC257012T1
Specification number	3W057H186-86262
Drive method	Direct coupling
Frame assignment standard	TECO
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated
Printed rated torque (kg m (printed))	65.4

Mounting: Foot

Drawing reference: 3W042D498/00

V157 · 200.0 kW · 4 pole · 315L · IM1001 : HS, Foot (B3)

Order AC257014T1 · Operating table OP051 · Download source PDF / archive

200D4,400-415,440-460V,3Ph,50,60Hz,D315L,AC257014T1_01.pdf · SRC-6864e14d2ca69cc2 · Website table/row/ID: 62 / 51 / 51 — listed Frame: 315L

Specification	Value
Rated output (kW)	200.0
Pole count	4
Printed mounting	IM1001 : HS, Foot (B3)
Frame	315L
Model	AESV4S
Connection	Not stated
Lead terminals	(R60-12)×6
Lubricant	Mobil Polyrex EM grease
Paint	AS2700S-N35
Rotor GD² (kg m²)	Not stated
Sheet weight	1370 kg
Revision	01
Order reference	AC257014T1
Specification number	3W057H186-86264
Drive method	Direct coupling
Frame assignment standard	TECO
Thermistors	PTC 150°C, 3 per set
Tropical proof	Stated
Printed rated torque (kg m (printed))	130.8

Mounting: Foot

Drawing reference: 3W042D508/00

Configuration operating tables

FLC means full-load current; FLT means full-load torque; LRC, LRT and BDT retain the source’s locked-rotor current, locked-rotor torque and breakdown-torque labels. Read C1 qualifications before using affected units.

OP001 · Applies only to V001, V002, V003, V004

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	1.56 A	83.5 %	83.0 %	2875.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
415 V / 50 Hz / 100% load	1.51 A	83.5 %	83.0 %	2875.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
440 V / 60 Hz / 100% load	1.4 A	83.5 %	83.0 %	2875.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	1.4 A	83.5 %	83.0 %	2875.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—

OP002 · Applies only to V005, V006, V007

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	1.71 A	85.7 %	74.0 %	1440.0 rpm	650.0 % FLC	230.0 % FLT	280.0 % FLT	—
415 V / 50 Hz / 100% load	1.65 A	85.7 %	74.0 %	1440.0 rpm	650.0 % FLC	230.0 % FLT	280.0 % FLT	—
440 V / 60 Hz / 100% load	1.6 A	85.5 %	74.0 %	1745.0 rpm	850.0 % FLC	230.0 % FLT	230.0 % FLT	—
460 V / 60 Hz / 100% load	1.5 A	85.5 %	74.0 %	1745.0 rpm	850.0 % FLC	230.0 % FLT	230.0 % FLT	—

OP003 · Applies only to V008, V009

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	2.68 A	84.5 %	70.0 %	950.0 rpm	550.0 % FLC	210.0 % FLT	250.0 % FLT	—
415 V / 50 Hz / 100% load	2.59 A	84.5 %	70.0 %	950.0 rpm	550.0 % FLC	210.0 % FLT	250.0 % FLT	—
440 V / 60 Hz / 100% load	2.4 A	84.5 %	70.0 %	950.0 rpm	550.0 % FLC	210.0 % FLT	210.0 % FLT	—
460 V / 60 Hz / 100% load	2.3 A	84.5 %	70.0 %	950.0 rpm	550.0 % FLC	210.0 % FLT	210.0 % FLT	—

OP004 · Applies only to V010, V011, V012, V013, V014

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	2.25 A	85.2 %	83.0 %	2880.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
415 V / 50 Hz / 100% load	2.16 A	85.2 %	83.0 %	2880.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
440 V / 60 Hz / 100% load	2.0 A	85.2 %	83.0 %	2880.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	2.0 A	85.2 %	83.0 %	2880.0 rpm	850.0 % FLC	300.0 % FLT	320.0 % FLT	—

OP005 · Applies only to V015, V016, V017

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	2.43 A	87.2 %	75.0 %	1445.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—
415 V / 50 Hz / 100% load	2.34 A	87.2 %	75.0 %	1445.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—
440 V / 60 Hz / 100% load	2.2 A	87.5 %	75.0 %	1750.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	2.1 A	87.5 %	75.0 %	1750.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—

OP006 · Applies only to V018, V019

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	3.6 A	85.9 %	70.0 %	960.0 rpm	650.0 % FLC	230.0 % FLT	300.0 % FLT	C1
415 V / 50 Hz / 100% load	3.47 A	85.9 %	70.0 %	960.0 rpm	650.0 % FLC	230.0 % FLT	300.0 % FLT	C1
440 V / 60 Hz / 100% load	3.2 A	85.9 %	71.0 %	1165.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1
460 V / 60 Hz / 100% load	3.1 A	85.9 %	71.0 %	1165.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

3.6 | 85.9 | 0.70 | 960 | 6.5 | 2.3 | 3.0
3.47 | 85.9 | 0.70 | 960 | 6.5 | 2.3 | 3.0
3.2 | 85.9 | 0.71 | 1165 | 6.5 | 2.1 | 2.1
3.1 | 85.9 | 0.71 | 1165 | 6.5 | 2.1 | 2.1

OP007 · Applies only to V020, V021, V022, V023, V024

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	2.94 A	86.5 %	85.0 %	2905.0 rpm	850.0 % FLC	230.0 % FLT	300.0 % FLT	—
415 V / 50 Hz / 100% load	2.84 A	86.5 %	85.0 %	2905.0 rpm	850.0 % FLC	230.0 % FLT	300.0 % FLT	—
440 V / 60 Hz / 100% load	2.7 A	86.5 %	85.0 %	2905.0 rpm	850.0 % FLC	230.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	2.6 A	86.5 %	85.0 %	2905.0 rpm	850.0 % FLC	230.0 % FLT	300.0 % FLT	—

OP008 · Applies only to V025, V026, V027

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	3.23 A	88.2 %	76.0 %	1440.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—
415 V / 50 Hz / 100% load	3.11 A	88.2 %	76.0 %	1440.0 rpm	750.0 % FLC	250.0 % FLT	300.0 % FLT	—
440 V / 60 Hz / 100% load	2.9 A	88.5 %	77.0 %	1745.0 rpm	800.0 % FLC	250.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	2.8 A	88.5 %	77.0 %	1745.0 rpm	800.0 % FLC	250.0 % FLT	280.0 % FLT	—

OP009 · Applies only to V028, V029

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	5.12 A	87.4 %	71.0 %	956.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1
415 V / 50 Hz / 100% load	4.93 A	87.4 %	71.0 %	956.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1
440 V / 60 Hz / 100% load	4.7 A	87.4 %	71.0 %	956.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1
460 V / 60 Hz / 100% load	4.4 A	87.4 %	71.0 %	956.0 rpm	650.0 % FLC	210.0 % FLT	210.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

5.12 | 87.4 | 0.71 | 956 | 6.5 | 2.1 | 2.1
4.93 | 87.4 | 0.71 | 956 | 6.5 | 2.1 | 2.1
4.7 | 87.4 | 0.71 | 956 | 6.5 | 2.1 | 2.1
4.4 | 87.4 | 0.71 | 956 | 6.5 | 2.1 | 2.1

OP010 · Applies only to V030, V031, V032, V033, V034

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	4.2 A	88.0 %	86.0 %	2910.0 rpm	900.0 % FLC	250.0 % FLT	320.0 % FLT	—
415 V / 50 Hz / 100% load	4.04 A	88.0 %	86.0 %	2910.0 rpm	900.0 % FLC	250.0 % FLT	320.0 % FLT	—
440 V / 60 Hz / 100% load	3.7 A	88.5 %	87.0 %	3510.0 rpm	900.0 % FLC	230.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	3.6 A	88.5 %	87.0 %	3510.0 rpm	900.0 % FLC	230.0 % FLT	280.0 % FLT	—

OP011 · Applies only to V035, V036, V037, V038

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	4.49 A	89.5 %	79.0 %	1460.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	C1
415 V / 50 Hz / 100% load	4.33 A	89.5 %	79.0 %	1460.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	C1
440 V / 60 Hz / 100% load	4.0 A	91.0 %	80.0 %	1765.0 rpm	950.0 % FLC	280.0 % FLT	380.0 % FLT	C1
460 V / 60 Hz / 100% load	3.8 A	91.0 %	80.0 %	1765.0 rpm	950.0 % FLC	280.0 % FLT	380.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

4.49 | 89.5 | 0.79 | 1460 | 9.5 | 3.0 | 3.8
4.33 | 89.5 | 0.79 | 1460 | 9.5 | 3.0 | 3.8
4.0 | 91.0 | 0.80 | 1765 | 9.5 | 2.8 | 3.8
3.8 | 91.0 | 0.80 | 1765 | 9.5 | 2.8 | 3.8

OP012 · Applies only to V039, V040, V041, V042, V043

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	5.99 A	90.4 %	80.0 %	1465.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	C1
415 V / 50 Hz / 100% load	5.77 A	90.4 %	80.0 %	1465.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	C1
440 V / 60 Hz / 100% load	5.3 A	91.0 %	81.0 %	1765.0 rpm	950.0 % FLC	280.0 % FLT	380.0 % FLT	C1
460 V / 60 Hz / 100% load	5.1 A	91.0 %	81.0 %	1765.0 rpm	950.0 % FLC	280.0 % FLT	380.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

5.99 | 90.4 | 0.80 | 1465 | 9.5 | 3.0 | 3.8
5.77 | 90.4 | 0.80 | 1465 | 9.5 | 3.0 | 3.8
5.3 | 91.0 | 0.81 | 1765 | 9.5 | 2.8 | 3.8
5.1 | 91.0 | 0.81 | 1765 | 9.5 | 2.8 | 3.8

OP013 · Applies only to V044, V045, V046, V047, V048

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	5.59 A	89.1 %	87.0 %	2905.0 rpm	900.0 % FLC	280.0 % FLT	320.0 % FLT	C1
415 V / 50 Hz / 100% load	5.38 A	89.1 %	87.0 %	2905.0 rpm	900.0 % FLC	280.0 % FLT	320.0 % FLT	C1
440 V / 60 Hz / 100% load	5.0 A	89.5 %	88.0 %	3500.0 rpm	950.0 % FLC	220.0 % FLT	230.0 % FLT	C1
460 V / 60 Hz / 100% load	4.8 A	89.5 %	88.0 %	3500.0 rpm	950.0 % FLC	220.0 % FLT	230.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

5.59 | 89.1 | 0.87 | 2905 | 9.0 | 2.8 | 3.2
5.38 | 89.1 | 0.87 | 2905 | 9.0 | 2.8 | 3.2
5.0 | 89.5 | 0.88 | 3500 | 9.5 | 2.2 | 2.3
4.8 | 89.5 | 0.88 | 3500 | 9.5 | 2.2 | 2.3

OP014 · Applies only to V049, V050

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	6.88 A	88.6 %	71.0 %	967.0 rpm	700.0 % FLC	200.0 % FLT	210.0 % FLT	—
415 V / 50 Hz / 100% load	6.63 A	88.6 %	71.0 %	967.0 rpm	700.0 % FLC	200.0 % FLT	210.0 % FLT	—
440 V / 60 Hz / 100% load	6.3 A	88.6 %	71.0 %	967.0 rpm	700.0 % FLC	200.0 % FLT	210.0 % FLT	—
460 V / 60 Hz / 100% load	6.0 A	88.6 %	71.0 %	967.0 rpm	700.0 % FLC	200.0 % FLT	210.0 % FLT	—

OP015 · Applies only to V051, V052, V053, V054, V055

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	7.92 A	91.1 %	80.0 %	1455.0 rpm	750.0 % FLC	220.0 % FLT	380.0 % FLT	C1
415 V / 50 Hz / 100% load	7.64 A	91.1 %	80.0 %	1455.0 rpm	750.0 % FLC	220.0 % FLT	380.0 % FLT	C1
440 V / 60 Hz / 100% load	7.1 A	91.0 %	81.0 %	1760.0 rpm	820.0 % FLC	220.0 % FLT	320.0 % FLT	C1
460 V / 60 Hz / 100% load	6.8 A	91.0 %	81.0 %	1760.0 rpm	820.0 % FLC	220.0 % FLT	320.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

7.92 | 91.1 | 0.80 | 1455 | 7.5 | 2.2 | 3.8
7.64 | 91.1 | 0.80 | 1455 | 7.5 | 2.2 | 3.8
7.1 | 91.0 | 0.81 | 1760 | 8.2 | 2.2 | 3.2
6.8 | 91.0 | 0.81 | 1760 | 8.2 | 2.2 | 3.2

OP016 · Applies only to V056, V057, V058, V059, V060

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	7.29 A	90.0 %	88.0 %	2920.0 rpm	950.0 % FLC	250.0 % FLT	320.0 % FLT	C1
415 V / 50 Hz / 100% load	7.03 A	90.0 %	88.0 %	2920.0 rpm	950.0 % FLC	250.0 % FLT	320.0 % FLT	C1
440 V / 60 Hz / 100% load	6.5 A	89.5 %	90.0 %	3520.0 rpm	950.0 % FLC	240.0 % FLT	320.0 % FLT	C1
460 V / 60 Hz / 100% load	6.2 A	89.5 %	90.0 %	3520.0 rpm	950.0 % FLC	240.0 % FLT	320.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

7.29 | 90.0 | 0.88 | 2920 | 9.5 | 2.5 | 3.2
7.03 | 90.0 | 0.88 | 2920 | 9.5 | 2.5 | 3.2
6.5 | 89.5 | 0.90 | 3520 | 9.5 | 2.4 | 3.2
6.2 | 89.5 | 0.90 | 3520 | 9.5 | 2.4 | 3.2

OP017 · Applies only to V061, V062

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	8.72 A	89.5 %	74.0 %	969.0 rpm	700.0 % FLC	200.0 % FLT	280.0 % FLT	C1
415 V / 50 Hz / 100% load	8.4 A	89.5 %	74.0 %	969.0 rpm	700.0 % FLC	200.0 % FLT	280.0 % FLT	C1
440 V / 60 Hz / 100% load	7.9 A	90.2 %	74.0 %	1170.0 rpm	750.0 % FLC	200.0 % FLT	280.0 % FLT	C1
460 V / 60 Hz / 100% load	7.5 A	90.2 %	74.0 %	1170.0 rpm	750.0 % FLC	200.0 % FLT	280.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

8.72 | 89.5 | 0.74 | 969 | 7.0 | 2.0 | 2.8
8.4 | 89.5 | 0.74 | 969 | 7.0 | 2.0 | 2.8
7.9 | 90.2 | 0.74 | 1170 | 7.5 | 2.0 | 2.8
7.5 | 90.2 | 0.74 | 1170 | 7.5 | 2.0 | 2.8

OP018 · Applies only to V063

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	12.18 A	90.5 %	72.0 %	970.0 rpm	800.0 % FLC	200.0 % FLT	210.0 % FLT	—
415 V / 50 Hz / 100% load	11.74 A	90.5 %	72.0 %	970.0 rpm	800.0 % FLC	200.0 % FLT	210.0 % FLT	—
440 V / 60 Hz / 100% load	11.1 A	90.5 %	72.0 %	970.0 rpm	800.0 % FLC	200.0 % FLT	210.0 % FLT	—
460 V / 60 Hz / 100% load	10.6 A	90.5 %	72.0 %	970.0 rpm	800.0 % FLC	200.0 % FLT	210.0 % FLT	—

OP019 · Applies only to V064, V065, V066, V067

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	9.92 A	90.9 %	88.0 %	2925.0 rpm	850.0 % FLC	200.0 % FLT	300.0 % FLT	—
415 V / 50 Hz / 100% load	9.57 A	90.9 %	88.0 %	2925.0 rpm	850.0 % FLC	200.0 % FLT	300.0 % FLT	—
440 V / 60 Hz / 100% load	9.0 A	90.2 %	89.0 %	3530.0 rpm	850.0 % FLC	200.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	8.6 A	90.2 %	89.0 %	3530.0 rpm	850.0 % FLC	200.0 % FLT	320.0 % FLT	—

OP020 · Applies only to V068, V069, V070, V071, V072

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	10.41 A	91.9 %	83.0 %	1465.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	—
415 V / 50 Hz / 100% load	10.03 A	91.9 %	83.0 %	1465.0 rpm	950.0 % FLC	300.0 % FLT	380.0 % FLT	—
440 V / 60 Hz / 100% load	9.3 A	92.4 %	84.0 %	1765.0 rpm	950.0 % FLC	250.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	8.9 A	92.4 %	84.0 %	1765.0 rpm	950.0 % FLC	250.0 % FLT	320.0 % FLT	—

OP021 · Applies only to V073, V074, V075, V076, V077

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	14.09 A	92.6 %	83.0 %	1465.0 rpm	950.0 % FLC	320.0 % FLT	380.0 % FLT	C1
415 V / 50 Hz / 100% load	13.58 A	92.6 %	83.0 %	1465.0 rpm	950.0 % FLC	320.0 % FLT	380.0 % FLT	C1
440 V / 60 Hz / 100% load	12.8 A	92.4 %	83.0 %	1760.0 rpm	900.0 % FLC	250.0 % FLT	320.0 % FLT	C1
460 V / 60 Hz / 100% load	12.3 A	92.4 %	83.0 %	1760.0 rpm	900.0 % FLC	250.0 % FLT	320.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

14.09 | 92.6 | 0.83 | 1465 | 9.5 | 3.2 | 3.8
13.58 | 92.6 | 0.83 | 1465 | 9.5 | 3.2 | 3.8
12.8 | 92.4 | 0.83 | 1760 | 9.0 | 2.5 | 3.2
12.3 | 92.4 | 0.83 | 1760 | 9.0 | 2.5 | 3.2

OP022 · Applies only to V078, V079, V080, V081, V082

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	13.26 A	91.7 %	89.0 %	2930.0 rpm	950.0 % FLC	220.0 % FLT	320.0 % FLT	C1
415 V / 50 Hz / 100% load	12.79 A	91.7 %	89.0 %	2930.0 rpm	950.0 % FLC	220.0 % FLT	320.0 % FLT	C1
440 V / 60 Hz / 100% load	11.9 A	91.7 %	90.0 %	3530.0 rpm	950.0 % FLC	200.0 % FLT	320.0 % FLT	C1
460 V / 60 Hz / 100% load	11.4 A	91.7 %	90.0 %	3530.0 rpm	950.0 % FLC	200.0 % FLT	320.0 % FLT	C1

C1: Unit interpretation is unresolved. The displayed source values must not be converted or treated as validated percentages without clarification.

Printed operating-value sequences with unresolved unit interpretation (do not infer conversions):

13.26 | 91.7 | 0.89 | 2930 | 9.5 | 2.2 | 3.2
12.79 | 91.7 | 0.89 | 2930 | 9.5 | 2.2 | 3.2
11.9 | 91.7 | 0.90 | 3530 | 9.5 | 2.0 | 3.2
11.4 | 91.7 | 0.90 | 3530 | 9.5 | 2.0 | 3.2

OP023 · Applies only to V083, V084

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	15.4 A	91.3 %	77.0 %	975.0 rpm	780.0 % FLC	275.0 % FLT	285.0 % FLT	—
415 V / 50 Hz / 100% load	14.8 A	91.3 %	77.0 %	975.0 rpm	780.0 % FLC	275.0 % FLT	285.0 % FLT	—
440 V / 60 Hz / 100% load	14.1 A	92.4 %	75.5 %	1180.0 rpm	925.0 % FLC	185.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	13.5 A	92.4 %	75.5 %	1180.0 rpm	925.0 % FLC	185.0 % FLT	280.0 % FLT	—

OP024 · Applies only to V085, V086

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	22.1 A	92.3 %	78.0 %	970.0 rpm	800.0 % FLC	275.0 % FLT	290.0 % FLT	—
415 V / 50 Hz / 100% load	21.3 A	92.3 %	78.0 %	970.0 rpm	800.0 % FLC	275.0 % FLT	290.0 % FLT	—
440 V / 60 Hz / 100% load	20.3 A	93.0 %	76.5 %	1175.0 rpm	975.0 % FLC	185.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	19.4 A	93.0 %	76.5 %	1175.0 rpm	975.0 % FLC	185.0 % FLT	280.0 % FLT	—

OP025 · Applies only to V087, V088, V089, V090, V091

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	20.4 A	93.3 %	83.5 %	1470.0 rpm	850.0 % FLC	250.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	19.6 A	93.3 %	83.5 %	1470.0 rpm	850.0 % FLC	250.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	18.4 A	93.6 %	84.0 %	1775.0 rpm	920.0 % FLC	210.0 % FLT	295.0 % FLT	—
460 V / 60 Hz / 100% load	17.6 A	93.6 %	84.0 %	1775.0 rpm	920.0 % FLC	210.0 % FLT	295.0 % FLT	—

OP026 · Applies only to V092, V093, V094, V095

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	19.3 A	92.6 %	89.0 %	2950.0 rpm	860.0 % FLC	240.0 % FLT	330.0 % FLT	—
415 V / 50 Hz / 100% load	18.6 A	92.6 %	89.0 %	2950.0 rpm	860.0 % FLC	240.0 % FLT	330.0 % FLT	—
440 V / 60 Hz / 100% load	17.6 A	92.4 %	89.0 %	3550.0 rpm	885.0 % FLC	205.0 % FLT	310.0 % FLT	—
460 V / 60 Hz / 100% load	16.8 A	92.4 %	89.0 %	3550.0 rpm	885.0 % FLC	205.0 % FLT	310.0 % FLT	—

OP027 · Applies only to V096, V097, V098, V099, V100

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	27.6 A	93.9 %	83.5 %	1470.0 rpm	850.0 % FLC	240.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	26.6 A	93.9 %	83.5 %	1470.0 rpm	850.0 % FLC	240.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	24.8 A	94.1 %	84.5 %	1775.0 rpm	990.0 % FLC	200.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	23.7 A	94.1 %	84.5 %	1775.0 rpm	990.0 % FLC	200.0 % FLT	280.0 % FLT	—

OP028 · Applies only to V101, V102

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	29.1 A	92.9 %	80.0 %	980.0 rpm	800.0 % FLC	275.0 % FLT	290.0 % FLT	—
415 V / 50 Hz / 100% load	28.1 A	92.9 %	80.0 %	980.0 rpm	800.0 % FLC	275.0 % FLT	290.0 % FLT	—
440 V / 60 Hz / 100% load	26.3 A	93.0 %	80.5 %	1180.0 rpm	940.0 % FLC	185.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	25.1 A	93.0 %	80.5 %	1180.0 rpm	940.0 % FLC	185.0 % FLT	280.0 % FLT	—

OP029 · Applies only to V103, V104, V105, V106, V107

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	26.1 A	93.3 %	89.0 %	2950.0 rpm	930.0 % FLC	265.0 % FLT	355.0 % FLT	—
415 V / 50 Hz / 100% load	25.1 A	93.3 %	89.0 %	2950.0 rpm	930.0 % FLC	265.0 % FLT	355.0 % FLT	—
440 V / 60 Hz / 100% load	23.9 A	92.4 %	89.0 %	3555.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	22.9 A	92.4 %	89.0 %	3555.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—

OP030 · Applies only to V108, V109, V110, V111

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	32.4 A	93.7 %	88.0 %	2950.0 rpm	930.0 % FLC	270.0 % FLT	350.0 % FLT	—
415 V / 50 Hz / 100% load	31.2 A	93.7 %	88.0 %	2950.0 rpm	930.0 % FLC	270.0 % FLT	350.0 % FLT	—
440 V / 60 Hz / 100% load	29.3 A	93.0 %	89.0 %	3550.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	28.1 A	93.0 %	89.0 %	3550.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—

OP031 · Applies only to V112, V113, V114

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	33.5 A	94.2 %	84.5 %	1480.0 rpm	795.0 % FLC	240.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	32.3 A	94.2 %	84.5 %	1480.0 rpm	795.0 % FLC	240.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	30.2 A	94.5 %	85.0 %	1775.0 rpm	750.0 % FLC	180.0 % FLT	240.0 % FLT	—
460 V / 60 Hz / 100% load	28.9 A	94.5 %	85.0 %	1775.0 rpm	750.0 % FLC	180.0 % FLT	240.0 % FLT	—

OP032 · Applies only to V115

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	33.6 A	93.4 %	85.0 %	980.0 rpm	645.0 % FLC	200.0 % FLT	230.0 % FLT	—
415 V / 50 Hz / 100% load	32.4 A	93.4 %	85.0 %	980.0 rpm	645.0 % FLC	200.0 % FLT	230.0 % FLT	—
440 V / 60 Hz / 100% load	30.0 A	94.1 %	86.0 %	1185.0 rpm	675.0 % FLC	180.0 % FLT	215.0 % FLT	—
460 V / 60 Hz / 100% load	28.7 A	94.1 %	86.0 %	1185.0 rpm	675.0 % FLC	180.0 % FLT	215.0 % FLT	—

OP033 · Applies only to V116, V117, V118

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	37.5 A	94.0 %	90.0 %	2950.0 rpm	950.0 % FLC	290.0 % FLT	350.0 % FLT	—
415 V / 50 Hz / 100% load	36.2 A	94.0 %	90.0 %	2950.0 rpm	950.0 % FLC	290.0 % FLT	350.0 % FLT	—
440 V / 60 Hz / 100% load	34.7 A	93.0 %	89.5 %	3555.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—
460 V / 60 Hz / 100% load	33.2 A	93.0 %	89.5 %	3555.0 rpm	990.0 % FLC	220.0 % FLT	320.0 % FLT	—

OP034 · Applies only to V119, V120

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	39.8 A	94.5 %	84.5 %	1480.0 rpm	935.0 % FLC	275.0 % FLT	285.0 % FLT	—
415 V / 50 Hz / 100% load	38.3 A	94.5 %	84.5 %	1480.0 rpm	935.0 % FLC	275.0 % FLT	285.0 % FLT	—
440 V / 60 Hz / 100% load	35.9 A	94.5 %	85.0 %	1775.0 rpm	990.0 % FLC	180.0 % FLT	240.0 % FLT	—
460 V / 60 Hz / 100% load	34.4 A	94.5 %	85.0 %	1775.0 rpm	990.0 % FLC	180.0 % FLT	240.0 % FLT	—

OP035 · Applies only to V121, V122, V123, V124

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	49.3 A	94.5 %	93.0 %	2960.0 rpm	780.0 % FLC	155.0 % FLT	265.0 % FLT	—
415 V / 50 Hz / 100% load	47.5 A	94.5 %	93.0 %	2960.0 rpm	780.0 % FLC	155.0 % FLT	265.0 % FLT	—
440 V / 60 Hz / 100% load	45.7 A	93.6 %	92.0 %	3565.0 rpm	930.0 % FLC	200.0 % FLT	250.0 % FLT	—
460 V / 60 Hz / 100% load	43.7 A	93.6 %	92.0 %	3565.0 rpm	930.0 % FLC	200.0 % FLT	250.0 % FLT	—

OP036 · Applies only to V125, V126, V127

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	54.0 A	94.9 %	84.5 %	1480.0 rpm	795.0 % FLC	220.0 % FLT	270.0 % FLT	—
415 V / 50 Hz / 100% load	52.0 A	94.9 %	84.5 %	1480.0 rpm	795.0 % FLC	220.0 % FLT	270.0 % FLT	—
440 V / 60 Hz / 100% load	48.5 A	95.0 %	85.5 %	1780.0 rpm	905.0 % FLC	180.0 % FLT	240.0 % FLT	—
460 V / 60 Hz / 100% load	46.4 A	95.0 %	85.5 %	1780.0 rpm	905.0 % FLC	180.0 % FLT	240.0 % FLT	—

OP037 · Applies only to V128, V129, V130

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	60.6 A	94.8 %	93.0 %	2965.0 rpm	880.0 % FLC	180.0 % FLT	295.0 % FLT	—
415 V / 50 Hz / 100% load	58.4 A	94.8 %	93.0 %	2965.0 rpm	880.0 % FLC	180.0 % FLT	295.0 % FLT	—
440 V / 60 Hz / 100% load	56.1 A	94.1 %	92.0 %	3565.0 rpm	980.0 % FLC	160.0 % FLT	275.0 % FLT	—
460 V / 60 Hz / 100% load	53.6 A	94.1 %	92.0 %	3565.0 rpm	980.0 % FLC	160.0 % FLT	275.0 % FLT	—

OP038 · Applies only to V131, V132, V133

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	65.2 A	95.2 %	86.0 %	1480.0 rpm	895.0 % FLC	210.0 % FLT	270.0 % FLT	—
415 V / 50 Hz / 100% load	62.9 A	95.2 %	86.0 %	1480.0 rpm	895.0 % FLC	210.0 % FLT	270.0 % FLT	—
440 V / 60 Hz / 100% load	58.8 A	95.4 %	86.5 %	1785.0 rpm	990.0 % FLC	150.0 % FLT	225.0 % FLT	—
460 V / 60 Hz / 100% load	56.3 A	95.4 %	86.5 %	1785.0 rpm	990.0 % FLC	150.0 % FLT	225.0 % FLT	—

OP039 · Applies only to V134, V135, V136

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	74.3 A	95.0 %	92.0 %	2965.0 rpm	745.0 % FLC	140.0 % FLT	270.0 % FLT	—
415 V / 50 Hz / 100% load	71.6 A	95.0 %	92.0 %	2965.0 rpm	745.0 % FLC	140.0 % FLT	270.0 % FLT	—
440 V / 60 Hz / 100% load	67.9 A	94.5 %	92.0 %	3565.0 rpm	810.0 % FLC	140.0 % FLT	275.0 % FLT	—
460 V / 60 Hz / 100% load	65.0 A	94.5 %	92.0 %	3565.0 rpm	810.0 % FLC	140.0 % FLT	275.0 % FLT	—

OP040 · Applies only to V137, V138, V139

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	78.7 A	95.4 %	86.5 %	1480.0 rpm	890.0 % FLC	210.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	75.9 A	95.4 %	86.5 %	1480.0 rpm	890.0 % FLC	210.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	71.1 A	95.4 %	87.0 %	1780.0 rpm	990.0 % FLC	150.0 % FLT	225.0 % FLT	—
460 V / 60 Hz / 100% load	68.0 A	95.4 %	87.0 %	1780.0 rpm	990.0 % FLC	150.0 % FLT	225.0 % FLT	—

OP041 · Applies only to V140, V141, V142

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	92.6 A	95.3 %	90.0 %	2970.0 rpm	890.0 % FLC	155.0 % FLT	330.0 % FLT	—
415 V / 50 Hz / 100% load	89.2 A	95.3 %	90.0 %	2970.0 rpm	890.0 % FLC	155.0 % FLT	330.0 % FLT	—
440 V / 60 Hz / 100% load	84.4 A	94.5 %	90.5 %	3570.0 rpm	990.0 % FLC	150.0 % FLT	275.0 % FLT	—
460 V / 60 Hz / 100% load	80.7 A	94.5 %	90.5 %	3570.0 rpm	990.0 % FLC	150.0 % FLT	275.0 % FLT	—

OP042 · Applies only to V143, V144, V145, V146

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	94.8 A	95.7 %	87.5 %	1480.0 rpm	865.0 % FLC	205.0 % FLT	280.0 % FLT	—
415 V / 50 Hz / 100% load	91.4 A	95.7 %	87.5 %	1480.0 rpm	865.0 % FLC	205.0 % FLT	280.0 % FLT	—
440 V / 60 Hz / 100% load	86.1 A	95.8 %	87.5 %	1780.0 rpm	950.0 % FLC	150.0 % FLT	225.0 % FLT	—
460 V / 60 Hz / 100% load	82.4 A	95.8 %	87.5 %	1780.0 rpm	950.0 % FLC	150.0 % FLT	225.0 % FLT	—

OP043 · Applies only to V147, V148

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	126.0 A	95.6 %	90.0 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
415 V / 50 Hz / 100% load	121.0 A	95.6 %	90.0 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
440 V / 60 Hz / 100% load	115.0 A	95.0 %	90.0 %	3570.0 rpm	850.0 % FLC	140.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	110.0 A	95.0 %	90.0 %	3570.0 rpm	850.0 % FLC	140.0 % FLT	300.0 % FLT	—

OP044 · Applies only to V149, V150

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	129.0 A	96.0 %	87.5 %	1488.0 rpm	800.0 % FLC	160.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	124.0 A	96.0 %	87.5 %	1488.0 rpm	800.0 % FLC	160.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	116.0 A	96.2 %	88.0 %	1785.0 rpm	760.0 % FLC	190.0 % FLT	280.0 % FLT	—
460 V / 60 Hz / 100% load	111.0 A	96.2 %	88.0 %	1785.0 rpm	760.0 % FLC	190.0 % FLT	280.0 % FLT	—

OP045 · Applies only to V151

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	151.0 A	95.8 %	90.0 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
415 V / 50 Hz / 100% load	145.0 A	95.8 %	90.0 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
440 V / 60 Hz / 100% load	138.0 A	95.4 %	90.0 %	3575.0 rpm	850.0 % FLC	180.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	132.0 A	95.4 %	90.0 %	3575.0 rpm	850.0 % FLC	180.0 % FLT	300.0 % FLT	—

OP046 · Applies only to V152

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	154.0 A	96.1 %	87.5 %	1488.0 rpm	800.0 % FLC	160.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	149.0 A	96.1 %	87.5 %	1488.0 rpm	800.0 % FLC	160.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	139.0 A	96.2 %	88.0 %	1785.0 rpm	760.0 % FLC	200.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	133.0 A	96.2 %	88.0 %	1785.0 rpm	760.0 % FLC	200.0 % FLT	300.0 % FLT	—

OP047 · Applies only to V153

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	188.0 A	96.3 %	87.5 %	1488.0 rpm	740.0 % FLC	180.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	182.0 A	96.3 %	87.5 %	1488.0 rpm	740.0 % FLC	180.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	170.0 A	96.2 %	88.0 %	1788.0 rpm	780.0 % FLC	200.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	163.0 A	96.2 %	88.0 %	1788.0 rpm	780.0 % FLC	200.0 % FLT	300.0 % FLT	—

OP048 · Applies only to V154

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	219.0 A	96.2 %	90.5 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
415 V / 50 Hz / 100% load	211.0 A	96.2 %	90.5 %	2975.0 rpm	820.0 % FLC	140.0 % FLT	280.0 % FLT	—
440 V / 60 Hz / 100% load	199.0 A	95.8 %	91.0 %	3575.0 rpm	820.0 % FLC	160.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	190.0 A	95.8 %	91.0 %	3575.0 rpm	820.0 % FLC	160.0 % FLT	300.0 % FLT	—

OP049 · Applies only to V155

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	226.0 A	96.4 %	87.5 %	1488.0 rpm	740.0 % FLC	180.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	218.0 A	96.4 %	87.5 %	1488.0 rpm	740.0 % FLC	180.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	203.0 A	96.5 %	88.5 %	1788.0 rpm	780.0 % FLC	200.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	194.0 A	96.5 %	88.5 %	1788.0 rpm	780.0 % FLC	200.0 % FLT	300.0 % FLT	—

OP050 · Applies only to V156

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	331.0 A	96.5 %	90.5 %	2975.0 rpm	800.0 % FLC	140.0 % FLT	250.0 % FLT	—
415 V / 50 Hz / 100% load	319.0 A	96.5 %	90.5 %	2975.0 rpm	800.0 % FLC	140.0 % FLT	250.0 % FLT	—
440 V / 60 Hz / 100% load	300.0 A	96.2 %	91.0 %	3575.0 rpm	800.0 % FLC	150.0 % FLT	260.0 % FLT	—
460 V / 60 Hz / 100% load	287.0 A	96.2 %	91.0 %	3575.0 rpm	800.0 % FLC	150.0 % FLT	260.0 % FLT	—

OP051 · Applies only to V157

Supply / frequency / load	Current (A)	Efficiency (%)	Power factor (%)	Speed (rpm)	Locked-rotor current (% FLC)	Locked-rotor torque (% FLT)	Breakdown torque (% FLT)	Conditions
400 V / 50 Hz / 100% load	339.0 A	96.7 %	88.0 %	1488.0 rpm	760.0 % FLC	200.0 % FLT	260.0 % FLT	—
415 V / 50 Hz / 100% load	327.0 A	96.7 %	88.0 %	1488.0 rpm	760.0 % FLC	200.0 % FLT	260.0 % FLT	—
440 V / 60 Hz / 100% load	306.0 A	96.5 %	89.0 %	1788.0 rpm	820.0 % FLC	220.0 % FLT	300.0 % FLT	—
460 V / 60 Hz / 100% load	292.0 A	96.5 %	89.0 %	1788.0 rpm	820.0 % FLC	220.0 % FLT	300.0 % FLT	—

Local support and product documents

Our Australian and New Zealand teams can help with selection, modifications, installation questions and service. We describe local stock and workshop support in our brochure; contact us to confirm current stock, lead times and the appropriate branch for your project.

When you contact us, include the required output and poles; supply voltage and frequency; mounting and shaft arrangement; driven equipment and starting method; ambient conditions; and any thermal protection, bearing, coating or monitoring requirements. An existing nameplate, drawing or order reference helps us compare the configuration accurately.

Our website and brochure state MEPS, AS/NZS and IP66 compliance. The general brochure does not identify an exact AS/NZS standard or motor-specific certificate number for every configuration. Ask us for the documentation required for your selected motor and site. The company management-system certificates linked below have their own entity and scope; they are not hazardous-area or individual motor approvals.

Talk to our team about your application

Back cover and regional contacts

MAXeV4 brochure · page 56

Printed regional contacts

Source region / location	Entity	Address	Phone	Fax	Email	Website
HEAD OFFICE / AUSTRALIA	TECO Australia Pty Limited	335-337 Woodpark Road, Smithfield NSW2164	+61 2 9765 8118	+61 2 9765 8185	sales.nsw@teco.com.au	www.teco.com.au
VIC/SA/TAS	TECO Australia Pty Limited	16 Longstaff Road,Bayswater VIC3153	+61 3 9720 4411	[not printed]	vicsales@teco.com.au	[not printed]
WA	TECO Australia Pty Limited	18 Hazelhurst Street,Kewdale WA6105	+61 8 9479 4879	[not printed]	sales.wa@teco.com.au	[not printed]
QLD	TECO Australia Pty Limited	50 Murdoch Circuit,Acacia Ridge QLD4110	+61 7 3373 9600	[not printed]	sales.qld@teco.com.au	[not printed]
NEW ZEALAND / Rolleston	TECO New Zealand Ltd	11 Container Drive,Rolleston,Canterbury7614	+64 3 271 8480	[not printed]	sales@teco.co.nz	[not printed]
NEW ZEALAND / Auckland	TECO New Zealand Ltd	4 Autumn Place,Penrose,Auckland1061	+64 9 526 8480	[not printed]	sales@teco.co.nz	[not printed]

These contact details are reproduced from the brochure. For current contact information, use our Contact Us page.

Supporting company documents

Our source website also links the following shared documents. Their terms, entities and scope are defined in the documents themselves; these are separate from the motor-specific specification records.

The brochure introduces our wider motors and drives business separately from MAXeV4. Its corporate text mentions ISO 9001 and ISO 14001; its badges show ISO 9001 and ISO 45001. Use the applicable company certificate for scope and status. Brochure illustrations and photographs do not add motor ratings or approvals.

Technical source basis: 56-page MAXeV4 brochure and 157 configuration PDFs in the collected product register. Product website refreshed 26 October 2026. Technical collection: 15 October 2026. Information is subject to change; confirm the selected configuration with our team.